|
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
Albino a+ clone monotub grow 1
#25076262 - 03/19/18 07:28 PM (6 years, 11 days ago) |
|
|
Hey fellow shroomery brothers and sisters! I’m new to these forums but not new to growing mushrooms but still fairly inexperienced. This monotub is 5 quarts wbs spawned to straight coir only. I didn’t intend to case. I just did damion5050 Tek with a top layer of coir only to cover the exposed wbs grains. Well it started fruiting super fast without being put into fruiting conditions when about 30 percent of the layer was colonized. So I put poly fill in the holes and decided to let it do what it wants to. This clone is my first clone I’ve used and I’ve had the best pinsets from this clone then I ever had with multispore. The fruit I cloned was the first pin to show up which also happened to be the largest mushroom in that tub. I ate that single mushroom which I’ll picture below and it was the strongest trip I’ve ever had even when I’ve eaten 5 dried grams of other mushrooms. I’ll continue to do updates on this grow. Every time I get amazing pinsets half of them usually abort leaving me with barely any for a yield.
The current pinset as of this morning
The clone these tubs came from
|
elasticaltiger
Like Tigers in Coitus
Registered: 06/24/13
Posts: 8,438
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25076277 - 03/19/18 07:35 PM (6 years, 11 days ago) |
|
|
Very nicely done guy! You've got a bright future ahead of you!
-------------------- First time growing cakes? DON'T make a Shotgun Fruiting Chamber The Shmuvbox. - The Old TC's Like it Afraid to Start Growing From Your Own Prints? Drop it Like a Tiger! No Pouring. No Syringes. No Cutting. No flaming. No Contamination. No Bullshit. "The best thing to do while your waiting is to start more stuff. I usually got so much happening that I have tossed projects simply because I didn't have time for them. -Pastywhite QFT Pastywhite's Easy Agar Tek (PastyPlates) Tiger Drop Video Demos By munchauzen Van Gogh would’ve sold more than one painting if he’d put tigers in them.―Bill Watterson EZEKIEL 23:20
|
mushboy
modboy
Registered: 04/24/05
Posts: 32,666
Loc: where?
|
|
nice grow dude! aa+ is one of my favs!! do a few more grows with that clone to prove its a winner and slant that bitch if you like it
|
Tmethyl
Smear in the shale
Registered: 07/16/12
Posts: 16,431
Loc: Florida
Last seen: 1 year, 6 months
|
Re: Albino a+ clone monotub grow [Re: mushboy]
#25076330 - 03/19/18 07:55 PM (6 years, 11 days ago) |
|
|
Sexy.
-------------------- ¯\_(ツ)_/¯
|
Podamous
Yeesh
Registered: 06/24/17
Posts: 107
Loc: Saskatchewan
|
Re: Albino a+ clone monotub grow [Re: Tmethyl]
#25076401 - 03/19/18 08:24 PM (6 years, 11 days ago) |
|
|
Those pins look great, good work. Praying for less aborts hahaha.
-------------------- Pod dumbs down: Flowhoods
|
ShroomyToons
Be Calm and Grow On
Registered: 01/16/17
Posts: 3,867
Loc: Rebel Flag
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25076409 - 03/19/18 08:27 PM (6 years, 11 days ago) |
|
|
So,if you're having a high amount of aborts, it's likely that your FAE or your sub field capacity is off, like too wet probably. FAE is easier to fix.
High amounts of aborts usually means you need to recheck things.
You're doing good, though!
I'm just trying to pinpoint where issues might be. You have tighter amounts of pins than my AA+, but the AA+ that runs here is big. Probably average of 45-50 grams per shroom. So different genetics are likely.
I really don't mean to be discouraging to you. Hope you take what I am saying without offense, as none is intended.
|
UnsungHero
Endure & Persist
Registered: 11/21/17
Posts: 495
Loc: root@remotehost
Last seen: 2 months, 3 days
|
Re: Albino a+ clone monotub grow [Re: TheGift] 1
#25076432 - 03/19/18 08:39 PM (6 years, 11 days ago) |
|
|
Bangin!
-------------------- "The quieter you become, the more you are able to hear."
|
myc9
Stranger
Registered: 10/10/17
Posts: 154
Last seen: 1 year, 7 months
|
Re: Albino a+ clone monotub grow [Re: UnsungHero]
#25076465 - 03/19/18 08:59 PM (6 years, 11 days ago) |
|
|
aborts=
Edited by myc9 (03/19/18 09:00 PM)
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
Re: Albino a+ clone monotub grow [Re: myc9]
#25077020 - 03/20/18 06:18 AM (6 years, 10 days ago) |
|
|
Today’s update of the pinset. They don’t seem to be aborting as of yet. Hope this is a good sign.
|
Tormato
The Goddess Kali Meh 😛
Registered: 07/01/17
Posts: 6,067
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25077024 - 03/20/18 06:22 AM (6 years, 10 days ago) |
|
|
Quote:
TheGift said:
Today’s update of the pinset. They don’t seem to be aborting as of yet. Hope this is a good sign.
-------------------- Helpful Threads The Shroomery Store Tormato's Q&A Thread Post Questions Here or PM me! "Lately it occurs to me what a long, strange trip it's been." ~ Grateful Dead Before you start...Do you have a Pressure Cooker and a Dehydrator? I highly recommend getting both!
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
|
Quote:
ShroomyToons said: So,if you're having a high amount of aborts, it's likely that your FAE or your sub field capacity is off, like too wet probably. FAE is easier to fix.
High amounts of aborts usually means you need to recheck things.
You're doing good, though!
I'm just trying to pinpoint where issues might be. You have tighter amounts of pins than my AA+, but the AA+ that runs here is big. Probably average of 45-50 grams per shroom. So different genetics are likely.
I really don't mean to be discouraging to you. Hope you take what I am saying without offense, as none is intended.
Ive ran this same clone 3 times before this. I’ve done it with less water in the substrate, more water then required, and the results were basically th same. I’m thinking that I open it to fan too much when they are still pins and allowing the humidity they need at the surface to leave thus wrecking the micro climate making some of them abort. So I loosened the polygil and am fanning much less. Probably 3 times a day instead of like 6. I’ve also tried only misting the sides of the tubs and I’ve done it while misting the pins directly. So maybe misting the pins before has caused them to abort. I don’t think it’s fae, im thinking it’s a humidity thing. I’ve dialed in my tubs pretty well after about 6-8 grows. This clone has given me the best pinsets to date in all three runs I’ve done with it. After I get them to maintain themselves and not abort I’ll be one happy camper. Don’t at all think your offending me by giving advice. I know there’s something I’m doing wrong for them to abort.
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
Re: Albino a+ clone monotub grow [Re: mushboy]
#25077032 - 03/20/18 06:29 AM (6 years, 10 days ago) |
|
|
Quote:
mushboy said: nice grow dude! aa+ is one of my favs!! do a few more grows with that clone to prove its a winner and slant that bitch if you like it
I’ve grown this clone out 3 times before this tub. So far it has proven to be a good clone. Colonized so fast, pins very quickly, and I consistently get amazing pinsets. I just have to keep them from aborting. The cloned fruit this came from gave me the most visual and intense trip I’ve ever had st any dose. The mushroom pictured above was 16.6 grams fresh which I’m not buying that 10 percent of that weight is what it would have been dry. I’ve had smaller mushrooms dry out to almost 4 grams so I’m thinking hat was a hefty dose I took. I couldn’t have been luckier to have cloned that one. Not often can you really judge potency off one mushroom.
|
Tmethyl
Smear in the shale
Registered: 07/16/12
Posts: 16,431
Loc: Florida
Last seen: 1 year, 6 months
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25077237 - 03/20/18 09:11 AM (6 years, 10 days ago) |
|
|
Quote:
TheGift said:
Today’s update of the pinset. They don’t seem to be aborting as of yet. Hope this is a good sign.
I'd appreciate it if you keep posting updates.
-------------------- ¯\_(ツ)_/¯
|
Tormato
The Goddess Kali Meh 😛
Registered: 07/01/17
Posts: 6,067
|
Re: Albino a+ clone monotub grow [Re: Tmethyl]
#25077249 - 03/20/18 09:16 AM (6 years, 10 days ago) |
|
|
Quote:
Tmethyl said:
Quote:
TheGift said:
Today’s update of the pinset. They don’t seem to be aborting as of yet. Hope this is a good sign.
I'd appreciate it if you keep posting updates.
-------------------- Helpful Threads The Shroomery Store Tormato's Q&A Thread Post Questions Here or PM me! "Lately it occurs to me what a long, strange trip it's been." ~ Grateful Dead Before you start...Do you have a Pressure Cooker and a Dehydrator? I highly recommend getting both!
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
Re: Albino a+ clone monotub grow [Re: Tmethyl]
#25077265 - 03/20/18 09:24 AM (6 years, 10 days ago) |
|
|
Quote:
Tmethyl said:
Quote:
TheGift said:
Today’s update of the pinset. They don’t seem to be aborting as of yet. Hope this is a good sign.
I'd appreciate it if you keep posting updates.
Will do my friend! Every day I’ll be updating with pictures. I have another tub without a top layer of coir that’s knitting up. I’ll be doing updates of that tub also.
|
Tmethyl
Smear in the shale
Registered: 07/16/12
Posts: 16,431
Loc: Florida
Last seen: 1 year, 6 months
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25077270 - 03/20/18 09:26 AM (6 years, 10 days ago) |
|
|
-------------------- ¯\_(ツ)_/¯
|
UnsungHero
Endure & Persist
Registered: 11/21/17
Posts: 495
Loc: root@remotehost
Last seen: 2 months, 3 days
|
Re: Albino a+ clone monotub grow [Re: Tmethyl]
#25077432 - 03/20/18 10:55 AM (6 years, 10 days ago) |
|
|
-------------------- "The quieter you become, the more you are able to hear."
|
thelanzii
Registered: 11/13/12
Posts: 5,434
|
Re: Albino a+ clone monotub grow [Re: UnsungHero]
#25077794 - 03/20/18 01:53 PM (6 years, 10 days ago) |
|
|
|
Madcapper144
Drummer
Registered: 01/05/18
Posts: 266
Last seen: 8 months, 7 days
|
Re: Albino a+ clone monotub grow [Re: thelanzii]
#25077841 - 03/20/18 02:20 PM (6 years, 10 days ago) |
|
|
-------------------- Buy the ticket, take the ride!!
|
Shrooms4life
TrippyShaman
Registered: 06/08/17
Posts: 1,375
Loc: Under the Viel
Last seen: 5 years, 10 months
|
|
Let's see those albino dicks!!
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
|
Quote:
Shrooms4life said: Let's see those albino dicks!!
Here are the albino dicks!!! As of this morning
|
Shrooms4life
TrippyShaman
Registered: 06/08/17
Posts: 1,375
Loc: Under the Viel
Last seen: 5 years, 10 months
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25079340 - 03/21/18 06:24 AM (6 years, 9 days ago) |
|
|
Fucking looking awesome man!! Ugh I'm jealous my monos are still colonizing :/
Did you apply a casing super late? Like when you saw it pinning you applied it?
|
Tmethyl
Smear in the shale
Registered: 07/16/12
Posts: 16,431
Loc: Florida
Last seen: 1 year, 6 months
|
|
-------------------- ¯\_(ツ)_/¯
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
|
Quote:
Shrooms4life said: Fucking looking awesome man!! Ugh I'm jealous my monos are still colonizing :/
Did you apply a casing super late? Like when you saw it pinning you applied it?
I’ve never used a casing layer intentionally. I did the damion coir tek where he adds a top layer of straight coir to cover the exposed grains from the wbs. Well obviously everything colonized underneath in about a week but it started pinning when about 30 percent of the layer was colonized even without taking the tape off the holes and adding polyfil. I saw it knotting up like crazy so I put the polyfil in and let her do her thing. I have another tub from this clone that’s not using a top layer and its starting to knot. With this clone I get pinsets like this I iv now just about every tub. My issue is when I get a pinset like this, half of them abort leaving me with jack shit for a yield. So far this tub with the unintentional casing hasn’t aborted yet so I may be using casing layers from now on if this other tub without the layer gets a lot of aborts. I’ll be doing updates in this topic of the other tub also. This tub is as basic as it gets. Just 5 quarts of wbs spawn to one brick of coir that was brought out fi is capacity with 3.5 quarts of water boiled. No vermiculite or anything else. I’ve had some really amazing yields without adding the other stuff, it’s my environment that ruins it for me. But after about 8-10 grows I’ve dialed in my technique. The cloned helps a ton: a lot more then I expect d ithem to help.
|
mushboy
modboy
Registered: 04/24/05
Posts: 32,666
Loc: where?
|
Re: Albino a+ clone monotub grow [Re: Tmethyl]
#25079376 - 03/21/18 06:50 AM (6 years, 9 days ago) |
|
|
Quote:
Tmethyl said:
|
Tormato
The Goddess Kali Meh 😛
Registered: 07/01/17
Posts: 6,067
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25079400 - 03/21/18 07:07 AM (6 years, 9 days ago) |
|
|
Quote:
TheGift said:
Quote:
Shrooms4life said: Let's see those albino dicks!!
Here are the albino dicks!!! As of this morning
Doing the happy dance for ya!
-------------------- Helpful Threads The Shroomery Store Tormato's Q&A Thread Post Questions Here or PM me! "Lately it occurs to me what a long, strange trip it's been." ~ Grateful Dead Before you start...Do you have a Pressure Cooker and a Dehydrator? I highly recommend getting both!
|
Martinsapin
no-mad
Registered: 09/12/16
Posts: 310
Loc: Canada
Last seen: 1 year, 9 months
|
Re: Albino a+ clone monotub grow [Re: Tormato]
#25080469 - 03/21/18 04:53 PM (6 years, 9 days ago) |
|
|
Wow ! Nice grow !
-------------------- looking for a sclerotia producer print
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
Re: Albino a+ clone monotub grow [Re: Martinsapin]
#25080617 - 03/21/18 06:03 PM (6 years, 9 days ago) |
|
|
Just pulled the poly fill from one of my top holes. The stems and caps seem really small and I’ve had this happen before and had an amazing yield that blew up over night. Here’s the older struggling tub.
Here the yield just one night after I pulled th polyfil. Just over 5oz.
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25081568 - 03/22/18 05:10 AM (6 years, 8 days ago) |
|
|
Here’s this mornings update. They’re seeming to grow a little skinny and small but they haven’t aborted. I saw some fuzzy feet last night so I pulled the poly fill overnight and they did get quite a bit of growth. I’ve done this before and the tub exploded over night. They still have another day or so tikl harvest.
|
iAtari
Jokester
Registered: 12/19/17
Posts: 104
Loc: Wonderland
Last seen: 5 years, 11 months
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25081589 - 03/22/18 05:28 AM (6 years, 8 days ago) |
|
|
Quote:
TheGift said:
Here’s this mornings update. They’re seeming to grow a little skinny and small but they haven’t aborted. I saw some fuzzy feet last night so I pulled the poly fill overnight and they did get quite a bit of growth. I’ve done this before and the tub exploded over night. They still have another day or so tikl harvest.
More fae.
--------------------
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25081590 - 03/22/18 05:28 AM (6 years, 8 days ago) |
|
|
Here’s the tub without the mock casing layer. Just started pinning, got 7 quarts of spawn for shite and giggles in this one.
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
Re: Albino a+ clone monotub grow [Re: iAtari]
#25081593 - 03/22/18 05:30 AM (6 years, 8 days ago) |
|
|
Quote:
iAtari said:
Quote:
TheGift said:
Here’s this mornings update. They’re seeming to grow a little skinny and small but they haven’t aborted. I saw some fuzzy feet last night so I pulled the poly fill overnight and they did get quite a bit of growth. I’ve done this before and the tub exploded over night. They still have another day or so tikl harvest.
More fae.
Really? What would you suggest? I already pulled the polyfil form one of the holes at the top last night. There’s a post a couple posts up with another tub I did this too and it exploded. Should I pull one of the bottom holes too? Or loosen them up? Even though they have really nice dry rings around them. I figured it was fae, damn fuzzy feet.
|
Shrooms4life
TrippyShaman
Registered: 06/08/17
Posts: 1,375
Loc: Under the Viel
Last seen: 5 years, 10 months
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25081665 - 03/22/18 06:34 AM (6 years, 8 days ago) |
|
|
If you are arround to watch it and make sure it doesn't dry out too much I would personally pull all the Polly, bottom water if you haven't and let those things pack on size before your harvest probably in the morning.
Also maybe it's just me but the tub that has no casing looks like it might have matted mycellium. Other then that looking awesome man!
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
|
Quote:
Shrooms4life said: If you are arround to watch it and make sure it doesn't dry out too much I would personally pull all the Polly, bottom water if you haven't and let those things pack on size before your harvest probably in the morning.
Also maybe it's just me but the tub that has no casing looks like it might have matted mycellium. Other then that looking awesome man!
Awesome! Thanks for the advice, I’ll pull the poly out and let her do her thing. What is matted mycelium? Never heard of that, what causes it?
|
Shrooms4life
TrippyShaman
Registered: 06/08/17
Posts: 1,375
Loc: Under the Viel
Last seen: 5 years, 10 months
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25081698 - 03/22/18 06:59 AM (6 years, 8 days ago) |
|
|
Matted mycellium happens when the surface gets too dried out then overly wet and continues that process till the mycellium forms a thicker top layer and it looks "Matted" down and it makes the pins have a harder time pushing through the surface layer.
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
|
Quote:
Shrooms4life said: Matted mycellium happens when the surface gets too dried out then overly wet and continues that process till the mycellium forms a thicker top layer and it looks "Matted" down and it makes the pins have a harder time pushing through the surface layer.
Makes perfect sense. I’ve got my best pinset from multispore when I’d mist the surface and let it evaporate, the repeat when it’s dry. The evaporation that way for me has given me my best pinsets. Other then this tub with the mock unintentional casing. Thanks for the info. What would you recommend I do instead for better evaporation without causing matting? Just keep doing coir only casings?
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
|
Quote:
Shrooms4life said: Matted mycellium happens when the surface gets too dried out then overly wet and continues that process till the mycellium forms a thicker top layer and it looks "Matted" down and it makes the pins have a harder time pushing through the surface layer.
What would you recommend I do for my fae issue on my next tubs? Should I start off packing the lower four holes even looser then this tub at the start. Last time I did that I got bruising on the substrate by the holes. So it’s hard for me to get that perfect balance. Maybe just stick with what I’m doing and pull all the holes after the pins develop.
|
Shrooms4life
TrippyShaman
Registered: 06/08/17
Posts: 1,375
Loc: Under the Viel
Last seen: 5 years, 10 months
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25081714 - 03/22/18 07:10 AM (6 years, 8 days ago) |
|
|
Whatever you are doing on the first tub is great man! I would of just increased fae once your pinset fills in.
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
|
Quote:
Shrooms4life said: Whatever you are doing on the first tub is great man! I would of just increased fae once your pinset fills in.
Thanks for th advice, I really appreciate it. So would I increase fae just after the pins fill out the surface or after they develop and grow a little?
|
Shrooms4life
TrippyShaman
Registered: 06/08/17
Posts: 1,375
Loc: Under the Viel
Last seen: 5 years, 10 months
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25081739 - 03/22/18 07:26 AM (6 years, 8 days ago) |
|
|
From what I've gathered once you get a desirable pinset you increase fae to boost the fruits into overdrive grow mode.
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
|
Quote:
Shrooms4life said: From what I've gathered once you get a desirable pinset you increase fae to boost the fruits into overdrive grow mode.
Have you had experience with taking all the poly fill out of a monotub? They seem to be growing more upright now so I’m very thankful of that.
|
Shrooms4life
TrippyShaman
Registered: 06/08/17
Posts: 1,375
Loc: Under the Viel
Last seen: 5 years, 10 months
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25082414 - 03/22/18 12:44 PM (6 years, 8 days ago) |
|
|
Quote:
TheGift said:
Quote:
Shrooms4life said: From what I've gathered once you get a desirable pinset you increase fae to boost the fruits into overdrive grow mode.
Have you had experience with taking all the poly fill out of a monotub? They seem to be growing more upright now so I’m very thankful of that.
Nope my monos are still colonizing atm but I've just gathered bits and pieces from the pros as I go.
I'll be sure to post up my mono once it pins but my clone isn't nearly as good as yours :/
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
|
Quote:
Shrooms4life said:
Quote:
TheGift said:
Quote:
Shrooms4life said: From what I've gathered once you get a desirable pinset you increase fae to boost the fruits into overdrive grow mode.
Have you had experience with taking all the poly fill out of a monotub? They seem to be growing more upright now so I’m very thankful of that.
Nope my monos are still colonizing atm but I've just gathered bits and pieces from the pros as I go.
I'll be sure to post up my mono once it pins but my clone isn't nearly as good as yours :/
I got lucky as hell on my clone. It was the first multispore albino a+ grow I did. It happened to be the first pin that popped up, was the biggest fruit in the tub, and I ate that single mushroom for the strongest most visual trip I’ve ever had. So I got lucky big time. I’d send you some liquid culture if I could haha. I’m all about helping people just like most people on here help me.
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
|
Quote:
Shrooms4life said: From what I've gathered once you get a desirable pinset you increase fae to boost the fruits into overdrive grow mode.
Had to put the bottom holes back in. Stems are turning blue now and some of the smaller ones have aborted since pulling the poly fil. Definitely not enough humidity for them to flourish. They’re blunt my on many of them like they’ve been picked.
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25082555 - 03/22/18 01:43 PM (6 years, 8 days ago) |
|
|
Most recent picture.
|
Tmethyl
Smear in the shale
Registered: 07/16/12
Posts: 16,431
Loc: Florida
Last seen: 1 year, 6 months
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25082561 - 03/22/18 01:46 PM (6 years, 8 days ago) |
|
|
Do you have long black hair TheGift?
-------------------- ¯\_(ツ)_/¯
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
Re: Albino a+ clone monotub grow [Re: Tmethyl]
#25082794 - 03/22/18 03:22 PM (6 years, 8 days ago) |
|
|
Quote:
Tmethyl said:
Do you have long black hair TheGift?
Nope that’s my woman’s hair your seeing lol I noticed that hair in the tub about an hour ago lol.
|
Tmethyl
Smear in the shale
Registered: 07/16/12
Posts: 16,431
Loc: Florida
Last seen: 1 year, 6 months
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25082804 - 03/22/18 03:24 PM (6 years, 8 days ago) |
|
|
Your grow is contaminated with Homo sapiens.
-------------------- ¯\_(ツ)_/¯
|
Tormato
The Goddess Kali Meh 😛
Registered: 07/01/17
Posts: 6,067
|
Re: Albino a+ clone monotub grow [Re: Tmethyl]
#25082837 - 03/22/18 03:37 PM (6 years, 8 days ago) |
|
|
Quote:
Tmethyl said: Your grow is contaminated with Homo sapiens.
That’s a hairy predicament
-------------------- Helpful Threads The Shroomery Store Tormato's Q&A Thread Post Questions Here or PM me! "Lately it occurs to me what a long, strange trip it's been." ~ Grateful Dead Before you start...Do you have a Pressure Cooker and a Dehydrator? I highly recommend getting both!
|
Tmethyl
Smear in the shale
Registered: 07/16/12
Posts: 16,431
Loc: Florida
Last seen: 1 year, 6 months
|
Re: Albino a+ clone monotub grow [Re: Tormato]
#25082841 - 03/22/18 03:39 PM (6 years, 8 days ago) |
|
|
-------------------- ¯\_(ツ)_/¯
|
Tormato
The Goddess Kali Meh 😛
Registered: 07/01/17
Posts: 6,067
|
Re: Albino a+ clone monotub grow [Re: Tmethyl]
#25082845 - 03/22/18 03:41 PM (6 years, 8 days ago) |
|
|
Would that be follicle mold?
-------------------- Helpful Threads The Shroomery Store Tormato's Q&A Thread Post Questions Here or PM me! "Lately it occurs to me what a long, strange trip it's been." ~ Grateful Dead Before you start...Do you have a Pressure Cooker and a Dehydrator? I highly recommend getting both!
|
Tmethyl
Smear in the shale
Registered: 07/16/12
Posts: 16,431
Loc: Florida
Last seen: 1 year, 6 months
|
Re: Albino a+ clone monotub grow [Re: Tormato]
#25082866 - 03/22/18 03:52 PM (6 years, 8 days ago) |
|
|
Feminas capillum would be the proper taxonomic classification for this contamination.
-------------------- ¯\_(ツ)_/¯
|
Tormato
The Goddess Kali Meh 😛
Registered: 07/01/17
Posts: 6,067
|
Re: Albino a+ clone monotub grow [Re: Tmethyl]
#25082876 - 03/22/18 04:00 PM (6 years, 8 days ago) |
|
|
Quote:
Tmethyl said: Feminan capillum would be the proper taxonomic classification for this contamination.
Ahhhhh gotcha...second flush should be fine as long as you rinse and repeat
-------------------- Helpful Threads The Shroomery Store Tormato's Q&A Thread Post Questions Here or PM me! "Lately it occurs to me what a long, strange trip it's been." ~ Grateful Dead Before you start...Do you have a Pressure Cooker and a Dehydrator? I highly recommend getting both!
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
Re: Albino a+ clone monotub grow [Re: Tormato] 1
#25084132 - 03/23/18 05:00 AM (6 years, 7 days ago) |
|
|
Harvest morning!! The mushrooms size suffer d from the lack of fae but they blew up over night. Removing only the top two wholes was key!
|
Crispykoot
Jello Wrangler
Registered: 10/16/16
Posts: 5,933
Loc:
Last seen: 10 hours, 5 minutes
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25084153 - 03/23/18 05:37 AM (6 years, 7 days ago) |
|
|
You can also do the opposite with the holes after a certain point I find it helps them get bigger in the added H. They are water hogs. Love A+.
Those shrooms will get waaay bigger beefore the veil breaks BTW.
-------------------- Shadowboxing the apocalypse and wandering the land
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
Re: Albino a+ clone monotub grow [Re: Crispykoot]
#25084165 - 03/23/18 05:47 AM (6 years, 7 days ago) |
|
|
Quote:
Crispykoot said: You can also do the opposite with the holes after a certain point I find it helps them get bigger in the added H. They are water hogs. Love A+.
Those shrooms will get waaay bigger beefore the veil breaks BTW.
Yea I was advised To remove all the holes and that wasn’t a good idea. The smaller mushrooms aborted and the bigger ones started turning blue so I put the bottom back in. In my house if I even loosely pack the bottom holes the substrate will start bruising. Normally I don’t get fae issues just aborts. I’ve had success twice now with a struggling tub and removed the top holes and it exploded over night. Usually I don’t have to pull any polyfil.
|
HerbalPotion
Dreamer
Registered: 03/02/18
Posts: 204
Loc: Hyperspace
Last seen: 5 years, 6 months
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25084169 - 03/23/18 05:55 AM (6 years, 7 days ago) |
|
|
Damn man awesome work
-------------------- ~ vision without execution is just hallucination ~
|
Crispykoot
Jello Wrangler
Registered: 10/16/16
Posts: 5,933
Loc:
Last seen: 10 hours, 5 minutes
|
|
Do you bottom water? That helps keep the H up with loose or removed poly and A+ benefits from it greatly.
-------------------- Shadowboxing the apocalypse and wandering the land
|
Madcapper144
Drummer
Registered: 01/05/18
Posts: 266
Last seen: 8 months, 7 days
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25084232 - 03/23/18 06:55 AM (6 years, 7 days ago) |
|
|
Quote:
TheGift said:
Harvest morning!! The mushrooms size suffer d from the lack of fae but they blew up over night. Removing only the top two wholes was key!
-------------------- Buy the ticket, take the ride!!
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
Re: Albino a+ clone monotub grow [Re: Crispykoot]
#25084359 - 03/23/18 08:30 AM (6 years, 7 days ago) |
|
|
Quote:
Crispykoot said: Do you bottom water? That helps keep the H up with loose or removed poly and A+ benefits from it greatly.
Do I what? Sorry I don’t understand what your asking. To me albino a+ has acted just like any other cubensis for me. Just looks a lot cooler then any other strain in my opinion. Although the albinos seem to be more potent then others for me but that just could be my luck with it.
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
Re: Albino a+ clone monotub grow [Re: TheGift] 2
#25084577 - 03/23/18 10:05 AM (6 years, 7 days ago) |
|
|
Waited until noon to harvest and holy shit!! Tons of fruits and the stems are so damn dense and heavy even though they look skinny and hollow. Filled my 5 tray dehydrator to the hilt!
|
UnsungHero
Endure & Persist
Registered: 11/21/17
Posts: 495
Loc: root@remotehost
Last seen: 2 months, 3 days
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25084614 - 03/23/18 10:18 AM (6 years, 7 days ago) |
|
|
Haha nice one!
Let's get trippy
-------------------- "The quieter you become, the more you are able to hear."
|
Shrooms4life
TrippyShaman
Registered: 06/08/17
Posts: 1,375
Loc: Under the Viel
Last seen: 5 years, 10 months
|
Re: Albino a+ clone monotub grow [Re: UnsungHero]
#25084847 - 03/23/18 11:36 AM (6 years, 7 days ago) |
|
|
Let us know the dried weight when you get it.
|
Tmethyl
Smear in the shale
Registered: 07/16/12
Posts: 16,431
Loc: Florida
Last seen: 1 year, 6 months
|
|
Thanks for all the photo updates TheGift! Fullllly appreciated.
-------------------- ¯\_(ツ)_/¯
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
|
Quote:
Shrooms4life said: Let us know the dried weight when you get it.
I’ll update with the dry weight tomorrow morning for sure. I’m going to guess it’s 4-5 ounces. Usually what it comes out too when my dehydrator is filled completely. Plus these have really dense stems.
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
Re: Albino a+ clone monotub grow [Re: Tmethyl]
#25085009 - 03/23/18 01:02 PM (6 years, 7 days ago) |
|
|
Quote:
Tmethyl said: Thanks for all the photo updates TheGift! Fullllly appreciated.
I’ll keep the updates coming for the next few flushes and another tub that just started pinning from the same clone with no casing layer and 7 quarts of spawn instead of 5. So far there’s only a few pins but they’re really big and swelling up like crazy.
|
Martinsapin
no-mad
Registered: 09/12/16
Posts: 310
Loc: Canada
Last seen: 1 year, 9 months
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25085381 - 03/23/18 04:11 PM (6 years, 7 days ago) |
|
|
yeah I myself remove the polyfill(in my case micropore tape) when theyre in grpwing mode, they like it ! 5 shrooms for you !
-------------------- looking for a sclerotia producer print
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
Re: Albino a+ clone monotub grow [Re: Martinsapin]
#25085459 - 03/23/18 04:33 PM (6 years, 7 days ago) |
|
|
Quote:
Martinsapin said: yeah I myself remove the polyfill(in my case micropore tape) when theyre in grpwing mode, they like it ! 5 shrooms for you !
Do you remove it from all of your holes or just the top holes? I removed all the holes a couple days ago but my substrate and fruits started bruising.
|
Martinsapin
no-mad
Registered: 09/12/16
Posts: 310
Loc: Canada
Last seen: 1 year, 9 months
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25085584 - 03/23/18 05:33 PM (6 years, 7 days ago) |
|
|
The 2 top ones, and some on the side. I do when its loaded, just like your actual tub, and when Im able to mist a couple of time a day. I do it for the last 48 hours lets say.
-------------------- looking for a sclerotia producer print
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
Re: Albino a+ clone monotub grow [Re: Martinsapin]
#25086650 - 03/24/18 07:08 AM (6 years, 6 days ago) |
|
|
The dry yield this morning of the first flush is 4 ounces and 15 grams and. Not the best but better then most of my tubs. I wanna pull those canopys with 8 ounces in them that I’ve seen.
|
TheGift
Stranger
Registered: 03/10/18
Posts: 48
Last seen: 10 days, 5 hours
|
Re: Albino a+ clone monotub grow [Re: TheGift]
#25096363 - 03/28/18 05:10 AM (6 years, 2 days ago) |
|
|
Here’s my second tub. No casing and 7 quarts of spawn versus the other that had 5 quarts. These mushrooms are the biggest i have ever grown. Unbelievable that they still have a lot of time to grow:
|
|