Home | Community | Message Board

Magic Mushrooms Zamnesia
This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Jump to first unread post Pages: 1
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
Humidifier set up incorrectly?
    #561795 -

Heya,

I put a lot of time putting this setup together but I can't get the humidifier to push vapor through the tubes, instead it seeps through the crack where the top meets the bottom. I sealed up the original vapor exhaust port on the humidifier, and mounted grommets where the tubes attach to the humidifier. When I let it run for a few minutes a SMALL amount of moisture collects at the begginning of the tubes but that is about it. Please help, all my effort will have been for nothing if I don't get this to work. Thanks in advance.







--------------------

Extras: Filter Print Post Top
Re: Humidifier set up incorrectly? [Re: UnclePimpy]
    #561821 -

what size tubing are you using? have you tried sealing where it comes out from in the crack between top and bottom? do you have a hole in your terr to release air as well? take a look at the set-up a friend of mine built, having the bottles upside down works great for drainage, it can be a bitch to try and empty them all the times as they do get quite a bit of water in them.

http://www.shroomery.org/forums/showflat.php?Cat=&Board=Forum2&Number=549535&fpart=1&PHPSESSID=

he uses ulra-sonic so anything i say is in refrence to that. but i am sure most of it is the same.


--------------------
___________________________________________________________
"the weekend has landed all that exists now is clubs,drugs, pubs, and parties" - Human Traffic

Extras: Filter Print Post Top
Re: Humidifier set up incorrectly? [Re: UnclePimpy]
    #562014 -

I use a cool mist as well. I use 3/4" O.D. x 5/8" I.D. hose. I originally had a 3/4" spigot valve inline thinking I needed to control the flow; it was way too much restriction. The top had to be sealed down to keep water from coming out. The other thing I used was a heating pad under the cool mist to heat the water a bit to get the humidity level I wanted. Humidity ran from 88% with the pad off to 98% with the pad on setting #2 of 4 settings. I would say your biggest problem is tube size as per your pic. Here?s a pic of my setup.


Six


--------------------
Peace
Six

Extras: Filter Print Post Top
Jump to top Pages: 1


Similar ThreadsPosterViewsRepliesLast post
* humidifying 65 gal aquarium duck_49 1,898 13 03/28/02 07:41 PM
by Roadkill
* Combining two humidifiers NOS4A2 526 5 12/31/04 06:21 PM
by NOS4A2
* filter disk over the air intake for a humidifier? seattlekid 1,103 3 04/28/02 06:20 PM
by CosmikDebris
* Re: exhaust holes Anonymous 1,024 5 04/20/00 01:59 AM
by Anonymous
* WARM Mist humidifier?
( 1 2 all )
Chris 2,804 25 09/04/04 02:57 AM
by utopianglory
* humidifier not humidifying. where is the humidity? hongus 1,738 8 10/17/01 12:40 PM
by hongus
* Preferance of humidifier for casings MrSmith 1,249 6 05/19/06 08:58 PM
by alsnow469
* Which Ultrasonic Humidifier do you use for your terrarium? tambourineman 2,165 0 11/30/06 08:00 AM
by tambourineman

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
753 topic views. 9 members, 175 guests and 174 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.025 seconds spending 0.01 seconds on 16 queries.