Home | Community | Message Board


This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Mushroom-Hut Shop: Substrate Mix

Jump to first unread post Pages: 1
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
casings - humidity
    #553346 -

Hey everyone.. I'm just wondering what effect high humidity has on a casing? I'm not sure of the actually humidity level - but the casing is being kept in a perlite humidified terrarium. Im guessing the humidity is close to 100% - am I going to get a tonne of aborts - or is high humidity not all that bad for a casing? I'm kinda confused as to how a cake is perfectly happy with high humidity whereas everything I read says that casings should have no more than 90% humidity.
The casing has pinned and there are about 60 pins making their way towards the heavens.. should I act now to save the crop or will they survive more or less? The casing is a 350ml millet flour/verm cake cased with plain verm.

Edited by _JJ_ (02/16/02 06:51 AM)

Extras: Filter Print Post Top
Re: casings - humidity [Re: _JJ_]
    #553350 -

You might want to lower your humidity a bit before your pins abhort. Basiclly, your casing is already providing the moisture. Keeping the humidity at about 80 - 90% in the terrarium is just so the casing doesn't dry out.

Extras: Filter Print Post Top
Re: casings - humidity [Re: _JJ_]
    #553394 -

Jus shift the lid on the top of your terranium a little so there isn't a seal and a little humidity should escape, bringing it down to around 85%

Extras: Filter Print Post Top
Re: casings - humidity [Re: _JJ_]
    #553541 -

during pre-pinning/primordia formation you want to keep 92-95% rH..
after pinset drop back the rH to 85-89%...


--------------------
Flying in a Blue Dream

Extras: Filter Print Post Top
Re: casings - humidity [Re: TCatz]
    #553570 -

>during pre-pinning/primordia formation you want to keep 92-95% rH..

Actually 95+%.

Extras: Filter Print Post Top
Jump to top Pages: 1

Mushroom-Hut Shop: Substrate Mix


Similar ThreadsPosterViewsRepliesLast post
* Casing Humidity *DELETED* TheCaptain 1,148 5 12/29/01 06:47 PM
by TCatz
* Casing Humidity and Deyhdrator Temps ChiefThunderbong 953 3 11/24/02 08:06 AM
by rhizo
* Casing, humidity and pinning farmer_maggot 2,735 2 09/24/01 05:59 PM
by pj541
* Im stumped....Casing Humidity and shite GreyMatter 1,299 2 06/18/02 01:15 AM
by GreyMatter
* casing humidity, better or worse? Visigoth 1,645 6 01/01/02 12:35 PM
by Anno
* what keeps a good casing humidity? rain_angel 1,152 3 06/15/02 06:25 PM
by rain_angel
* Casing, Humidity and Life PhilO'Cybin 1,257 4 07/16/01 11:55 AM
by psilocyber
* Casing Humidity zeta 1,289 5 09/28/02 11:31 PM
by Anonymous

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: DERRAYLD, Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
2,121 topic views. 12 members, 470 guests and 185 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.026 seconds spending 0.007 seconds on 16 queries.