Auto-SummaryThe author is a beginner in mushroom cultivation and is seeking advice on setting up their incubation environment for growing oyster mushrooms. They plan to use a jar-based method, specifically the Magash's tek, and are concerned about achieving the optimal temperature and humidity levels in their basement closet, which is their proposed incubation spot. They have a humidifier and dehumidifier to control the humidity, which is currently around 65-70%, and are considering running the humidifier constantly to reach 100% humidity. They also have questions about inoculation, PCing (pasteurization), and fruiting, including what type of substrate to use (coir or vermiculite) and how to control the environment to encourage mushroom growth. Additionally, the author is seeking advice on which strain to start with for a first-time beginner, something that is easy to grow, fast-growing, and produces decent to good results.
ive just recently been interested in cultivating mushrooms, so i figured nows the time to start.
i plan to follow the tek on mushmush.nl using jars and Magash's tek posted at http://www.shroomery.org/forums/showflat...;o=&fpart=1 . everything seems very straightforward i just have a few questions about PCing the jars, inoculation and need advice on my cultivation environment.
to start off, i should mention where i live, which is northeast USA. it gets pretty cold up here, cold enough to snow and is often near zero or below in the winter. it's just now starting to get cold, hell tonight while outside with my mom i could see my breath. in my house, we redid our basement and my room is down here. it's naturally cold down here. i dont know any exact numbers yet since i dont have a thermometer. i'll get one soon, and continue to post here with updates. i do however have a humidity reading. right now, its between 60% and 75%, leaning towards 60% so i'd say around 65-70%. this seems a little low since in another advice thread zerozero stated that he/she cultivates in 100% humidity. i have both a humidifier, and dehumidifier so if i need more or less humidity, which im thinking i'll need more, i can run the humidifier constantly, if not run two of them. since the room i plan to grow in is in the basement, there are no windows, the only light is from lightbulbs. i think my incubation spot will be in my closet. i'll talk to my dad about putting another closet rack in, so i can have two shelves to put jars on. quoting mushmush.nl's tek: "Tha cakes should be incubated in a warm, clean and dark location. Since the microboxes have an air filter they can be placed virtually anywhere. They will not suffer from air contamination even in the most dusty environments. The glass jars however do not have filter and care should be taken not to expose them to drafts.". i have a heater i can run in the closet constantly if need be, i can figure out which setting i need to keep it on to keep the temperature near perfect (ill clear any fire hazards out of course). the environment will be clean, vacuumed, dusted, etc. and since its my closet, which will rarely be opened (clothes are in another room), it will be dark for the most part. again, since its the closet, there will be no drafts to worry about. my question for you all is, will the closet work fine granted i can fix my temperature problem? i will also probably run the humidifier in there constantly, to try to get it near 100% humidity. i considered incubating in my computer case, which ive read some things about. the temperature in there would be good, but humidity would be a problem, i cant really run a humidifier inside my computer, so i think i will use the closet, or maybe try the tub-in-tub tek. tub-in-tub seems like it would be very good, and much easier to control the temp/humidity than a whole closet. what do you think?
now with the incubation setting explained, i had a question about the jar stuff. i understand that you dont want the jar lid to be on tight, so it wont explode in the PC. i plan to just do what they did on the tek site, poke 4 holes in the lid. maybe it's because its late here i misread this, but should tape be placed over the holes after their made, so the tape is in the PC also? or should that be done after the jars have been in the PC, and after inoculation.
now, fruiting. i plan to just use a just follow Magash's tek which seems very straightforward and easy to reproduce. a quick question to either him/her, or anyone who's followed it, you PC the coir/verm correct? and what would be a likely place where i could find coir to buy? Magash said it'd be good to cover the sides of the casing so they dont start pinning, so i plan to be safe than sorry and will cover the whole thing. im not very good with cultivation terms (yet), what does "patching" mean (specifically quoting Magash: "Lots of people like to patch at this time. Myself I?ve never been one for patching so in the chamber they go. "). now looking at the "chamber", would you set the cool mist to pump out mist into the chamber so theres some moisture in the air? if so, should it just be a light amount of mist coming out, just enough so its just right?
wrapping this long post up, just some quick things on harvesting. im going to take a stab at saying the veil of the mushroom is that little ring thing below the cap, and when that tears down it's time to harvest, right? the rest of the post seems to be about making spore prints from the harvest, which i'm not interested in at this point, im just trying to get started.
one last, quick question, what would be the best strain to start off with for a first time beginner? something that you would say is the easiest to grow, fast-growing, and produces decent to good results? i plan to order a spore syringe from TLG so anything in stock from there will do perfectly.
sorry for any trivial questions, confusing ones, or anything thats blatantly obvious, it's a bit late here.
thanks for anyone who reads this and can share some info. i figured it'd be better to get adivce from experienced growers beforehand then buy the materials needed. cant wait to get started, i've always been interested in growing things, so i think ive found my new hobby thanks again and sorry for the long read!
--------------------
www.djpoland.tk
|