SirPsycho said:

rumfor69 said:

DERRAYLD has a write up for no pours in glass dishes. I did it once. Pour em, let them solidify, then thoroughly wrap the stacks in multiple layers of tinfoil, PC, once cooled completely remove from pc and goto ur flow or sab and get them surand or filmed

---

I do no pour with PP5 petris(like actual petris), wrap them in one layer of foil, let them cool in the PC, pull the foil off in open air and let them sit unwrapped in my drawer.

Culture drawer, the plates in the back are waiting to be used. The three stacks on the right have been in there unwrapped since Feb 24

---

Galt said:

SirPsycho said:

rumfor69 said:

DERRAYLD has a write up for no pours in glass dishes. I did it once. Pour em, let them solidify, then thoroughly wrap the stacks in multiple layers of tinfoil, PC, once cooled completely remove from pc and goto ur flow or sab and get them surand or filmed

---

I do no pour with PP5 petris(like actual petris), wrap them in one layer of foil, let them cool in the PC, pull the foil off in open air and let them sit unwrapped in my drawer.

Culture drawer, the plates in the back are waiting to be used. The three stacks on the right have been in there unwrapped since Feb 24

---

Where do you get pp5 petri? I've only found the screw top bead containers.

---

Galt said:

Where do you get pp5 petri? I've only found the screw top bead containers.

---

Some other guy said:

Whyterye said:

Still can’t believe this. My friend had a yeti plate that he kept on top of his fridge for over 8 months. It was dried and shriveled with one single pin on it . I took it home and transferred it did two transfers and here we are.

---

Damn those are nice yeti plates. Mine are always EXTREMELY tomentose. I'll have to find a picture later. I've never had anything else grow out like they do.

---

Adrenognome said:

I took T1 to grain for clone tissue. I will probably take this to grain too, but will do a T3 first. Does anything stand out to you?

---

SirPsycho said:

I do no pour with PP5 petris(like actual petris), wrap them in one layer of foil, let them cool in the PC, pull the foil off in open air and let them sit unwrapped in my drawer.

Culture drawer, the plates in the back are waiting to be used. The three stacks on the right have been in there unwrapped since Feb 24

---

OMFG! Ugh what the....man....dude...ugh like what the hell man! Like are you seriously trying to be a TC, because man...you post some good stuff my friend.

Be honest, you pooped a little at first...it's ok..just had to give you some shit. Carry on!

Tormy's got jokes today!

HugoFuguzev said:

Some noob agar questions (first time w/ agar)...looking to pour some agar into a sleeve of 20 dishes this weekend (that's all the petri dishes I currently have).  Thinking of inoculating 6 to 8 of them within 24 to 36 hours after that.  Maybe do 3 or 4 with a MSS from a vendor (APE or TidalWave) and another 3 or 4 with a dry B+ spore print I obtained from my first successful grow a few weeks ago.  (1st grow had B+ and PE cakes...I've been harvesting the PEs, but haven't taken any clones from them--they're on their way out so not sure if something viable will fruit within the next week (birthed ~ 6 weeks ago)).  So some dishes will just have agar to begin with which will allow me to wait and see, and then be available for transfers.
Does this approach make sense for a sleeve of 20?  And, can all be stored at room temperature for the next few weeks while waiting for streaked plates to grow myc?

  Thanks Again (read more than I post, but just want to give a pat on the back to all the contributors, trusted cultivators, and the savvy site itself)

---