Home | Community | Message Board


This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: Original Sensible Seeds Bulk Cannabis Seeds   Sporeworks.EU Spores for European Microscopy   Myyco.com Isolated Cubensis Liquid Culture For Sale   Mushroom-Hut Liquid Cultures   North Spore Bulk Substrate   MagicBag.co All-In-One Bags That Don't Suck   Unfolding Nature Unfolding Nature: Being in the Implicate Order

Jump to first unread post Pages: | 1 | 2 | 3 | 4 | 5 | 6 |  [ show all ]
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
Re: Camplo's Cjars [Re: Machiavelliavore]
    #22557139 -

you can shake it, it's fine for it to touch the ez felt


--------------------
It doesn't matter what i think of you...all that matters is clean spawn
I'm tired do me a favor

I'M A MEMBER FIRST, TC WHEN NEEDED AND MOD WHEN I HAVE TO BE !!!

Extras: Filter Print Post Top
Re: Camplo's Cjars [Re: cronicr]
    #22557228 -

The whole point of the jar is to propagate large amounts spawn or grain & sub mixture, so the only thing I'm looking to see is large amounts of 100% colonized and uncontaminated spawn/substrate in the jar. I think it would be better to fruit elsewhere BUT I'll admit that I'd like to see a grain/sub mixture inoculated, colonized, cased and fruited in the jar.


The jar with vents, on the left, I think, might serve purpose to start pinning? I covered the vents with medical tape for the moment, for fear of it drying out, even though its not terribly open, the slits being almost 1/8 thick.

I didn't intentialy design it for that. I envision a deep dish cake of whatever sub floats your boat, colonizing in it, hence the slits being every 4 inches, same concept as a straw log but with the container being reusable. Only a tin foil lid would be required for colonizing bulk sub which would be birthed and fruited else where.  Ultimate goal would be colonizing ~9 quarts of hydrated grain  in under a week, and then spawn that to another ~9 of bulksub have that colonized within the next week and then birthed as a giant cake. I don't feel like what I'm doing takes any extra energy outside of me being the sole designer and having to figure out how to make it work.


--------------------
:three:

Edited by camplo (11/21/15 10:35 PM)

Extras: Filter Print Post Top
Re: Camplo's Cjars [Re: cronicr]
    #22557315 -

cronicr said:
you can shake it, it's fine for it to touch the ez felt



I'd be fine shaking if it was full of grain and then lets say I did G2G. If I did lc I'd roll it and then shake it once the excess liquid was soaked in. Using slurry...I'd be afraid of getting slurry on the filter, thus I would limit the shake. Less shake and more roll....something like that.
:breakout:
If I was full of grain and sub...it would seem that substrate would readily stick to the filter. Actually from my experiments I learned that you cannot create an evenly dispersed heterogeneous mix and then shake it in a jar and expect it to stay that way. Which is why I had the crazy design with the bags that was supposed to be access to a large spoon inside the jar. It could work but creating a lid to allow all the those things has been an uphill battle.


--------------------
:three:

Edited by camplo (11/21/15 10:46 PM)

Extras: Filter Print Post Top
Re: Camplo's Cjars [Re: camplo]
    #22557318 -

it is still just the underside which will just dry up


--------------------
It doesn't matter what i think of you...all that matters is clean spawn
I'm tired do me a favor

I'M A MEMBER FIRST, TC WHEN NEEDED AND MOD WHEN I HAVE TO BE !!!

Extras: Filter Print Post Top
Re: Camplo's Cjars [Re: cronicr]
    #22557386 -

I'm not disagreeing, I'm not super familiar with ez-felt, I've always used tyvek in the past. As a filter ez-felt is pretty preferable. The aluminum tape is awesome btw but guess what.....it sticks very well to the glass and NOT the ez-felt.....which is horrible since it has all the qualities I needed, super tight seal and water proof. I could fashion another lid out of polycarbonate and cut a hole in it but that brings back some other issues I don't have to deal with if I just use the ez-felt top. Sooo, it actually might be good enough as is. I did an empty test run and it seemed 80% safe. The tape stayed snugg to the sides of the ez-felt lid which itself is sealed together with a silicon ring, outside circle of the filter. Upon further investigation it was obvious the aluminum tape had no preference for sticking to the silicon or ez-felt, SO, my brainstorming recently forseen aluminum tape to start the seal and then duct to seal where the aluminum tape stops and the ez-felt begins. Clear packaging tape might be an option too. Medical tape might work too....might. Back to brain storming
:shitmypants:
ps- I did have an idea to attach a sort of brim that would run form the edge of the lid down the sides of the jar. Silicon seems to work really well as an adhesive for ez-felt. if the lip extended far enough potentially a string could be use to tie and seal the sides...I actually like that idea.


--------------------
:three:

Edited by camplo (11/21/15 11:05 PM)

Extras: Filter Print Post Top
Re: Camplo's Cjars [Re: camplo]
    #22564515 -




This is probably the coolest thing I've created. Its a lid for my Cjars with made completely out of ez_felt, silicon, little epoxy, and the top off of a quart jar.

3 layers on top, siliconed together to give it some strength and a brim 4 inches long. I'll take some nylon string and tie a fishermans knot around it to close it up. This is it! Nothing else, No more problems! can I forsee! Eureka!!!


I still am not sure how to best take advantage of this contraption but I'll add it two the list of 2 contraption I've made that are completely functional and are actually handy to have, the CSlurry jar, being the first invention, still going strong, I use it to slurry grains for bulk no prob. Might not need a gallon sized slurry jar, but if you did... Might not need a jar that is completely autoclavable, that holds something like 6-8 gallons (I forget) but if you did.....I got it!


--------------------
:three:

Edited by camplo (11/24/15 06:57 AM)

Extras: Filter Print Post Top
Re: Camplo's Cjars [Re: camplo]
    #22567105 -



Here she is in all her glory. The cap fits so good I'd bet I could load it and run it without any extra effort in sealing the sides. The silicon joined and sealed the ez-felt perfectly because of being able to impregnate the felt. This is a long term solution to my problem of completing the CJar. It is durable and sturdy and cheap, less then 10 dollars in materials. Even though this is a job well done, until I've actually put it to the test, no one will respect it. Guess I'll get to prepping about 10lbs of grain!
:ewaahh:


--------------------
:three:

Edited by camplo (11/24/15 11:20 AM)

Extras: Filter Print Post Top
Re: Camplo's Cjars [Re: camplo]
    #22567650 -

Good luck camp:thumbup:


--------------------
It doesn't matter what i think of you...all that matters is clean spawn
I'm tired do me a favor

I'M A MEMBER FIRST, TC WHEN NEEDED AND MOD WHEN I HAVE TO BE !!!

Extras: Filter Print Post Top
Re: Camplo's Cjars [Re: cronicr]
    #22578447 -

Last design of my Cjar. Ran a test run with a small amount of LC in it for about 20 minutes hitting 20psi or so. Did not cover it with foil, wanted to see what it could handle. Ended up cracking the jar.... because I was high, super distracted, multi-tasking and left the burner on too high, this place has some wicked gas burners. I knew better too 
:imout:.
I was rushing as well and it was like 3 am. Anyway!
When using the Cjar you have to heat it, not necessarily slow, but in unison with the pressure cooker. I had the water boiling when I loaded the room temp cjar. So basically I need to start with everything at room temp, load it, put on lid, and begin like I normally do!! lol.
After seeing the affects of the large amount of LC I used on my pair of gallon jars I am confident that LC is the way to go when I attempt to do 10 or more lbs of grain in this thing. Approximately 60ml per full quart. I don't think I'll get complete colonization in 3-4 days like I want but it will be enough mycelium to cover over 50% of the grain and by judging my gallon jars approximately 1 week till full colonization? The efficacy of a LC seems to be directly impacted by how well the mycelium has been blended into the liquid medium. I think that is a good reason why people have good results from LI made from water and agar. If you were to hit your malt LC with a blender I bet you would see better performance as well.


--------------------
:three:

Extras: Filter Print Post Top
Re: Camplo's Cjars [Re: camplo]
    #22578451 -

dammmm...


--------------------
It doesn't matter what i think of you...all that matters is clean spawn
I'm tired do me a favor

I'M A MEMBER FIRST, TC WHEN NEEDED AND MOD WHEN I HAVE TO BE !!!

Extras: Filter Print Post Top
Re: Camplo's Cjars [Re: cronicr]
    #22578540 -

its the 2nd one I've cracked....I have more.


--------------------
:three:

Edited by camplo (11/26/15 04:08 PM)

Extras: Filter Print Post Top
Re: Camplo's Cjars [Re: camplo]
    #22666729 -

So everyone that seen what happened with the last Cjar, and that cares to contribute to the development of my contraption....heres where I'm at.

I've come up with a solution to some of the problems discovered from the last attempt.
Ok the straw dried out at the top....which was expected. What I didn't expect was that the drying caused a layer of dried grain that eventually sealed off the bottom of the jar.
  The solution I've come up with is to make the lid in such a way that it is sealed like a normal lid would be. I'll do so using the ez-felt for the base, which is pretty cheap and easily accessible, as well the construction was super easy. The extra step is to use Silicone and "paint" the surface with it, as well impregnating it, in order to seal it. Depending on how well it goes I may just "paint" the underside or both sides.
The next problem I have is the dept and make up of the substrate. Supposedly you can go 12 inches with straw. I'm aiming for 8 with a 1:1 ratio of grain. This might be too thick if mixed regularly. I've learn that the inner walls of the jar are a channel for air. I've come up with this.
  I'll layer the grain and straw in 1 inch segments. The straw being so course and porous will allow for good air follow in between the layers of grain. The inner walls will feed gas exchange to the straw.
The last issue I can think of is water content. I know I can use a large amount of LC with the large amount of grain. It still would be preferable to not have to offset it so much. I feel I could still get even dispersion of mycelium, via LC, with a lesser amount. I am planning on using a grain slurry on my next attempt. So something like 2 parts water 1 part grain? 1:1 might be too thick. If anyone knows the magic ratio to use for grain slurry, so I can have flow but have it still be thick enough to not throw off the water content. I'd appreciate it the info.


Why the last Cjar contamed is not clearly known to me at this time. it only got the green stuff, the grain still smelled fresh so I don't think bacteria got in. So if the filter failed, you'd think that bacteria and green mold would be there. I maybe have failed at Pcing the water I added to the original LC. It had brf and sof flour in it, maybe the 30minutes at 15psi wasn't enough?... I had my blender lid on top of that, maybe it didn't seal and sucked in some contams into the liquid, making the inoculant the culprit.
Still the green stuff was present on the top layer of straw and only on the outter of substrate along the jar inner wall. Maybe the filter did fail.

It started out as mush mycelium but then the "grey" stuff came, which eventually turned out to be green...

Too many things went wrong, must fix all the things.
Any ideas would be appreciated. Posts by nay sayers are unwelcome, and unproductive... but its a free country so.


--------------------
:three:

Extras: Filter Print Post Top
Re: Camplo's Cjars [Re: camplo]
    #22705243 -

any improvements so far?
:popcorn:

Extras: Filter Print Post Top
Re: Camplo's Cjars [Re: bodhisatta]
    #22705345 -

bodhisatta said:
any improvements so far?
:popcorn:



Well, he's gonna have a hard time replying since he went and trolled up the thread that was surely inspiration for this one.


--------------------
                            :rainbowdrink: Tea doesn't work?                            AMU  (Q & A)                  Grain prep for Intergalactic Space Oats :pes:     

Coir-ca-cola
Jokes are funny until they're about you

Edited by Inocuole (12/27/15 03:29 PM)

Extras: Filter Print Post Top
Re: Camplo's CJar's [Re: camplo]
    #22705447 -

This thread has been closed.

Reason:
lifes a bitch

Extras: Filter Print Post Top
Re: Camplo's CJar's (moved) [Re: camplo]
    #22706287 -

This thread was moved from Mushroom Cultivation.

Reason:
Just so ya feel like you won something from today, you can be boss here.

Extras: Filter Print Post Top
Re: Camplo's CJar's (moved) [Re: camplo]
    #22710303 -

This thread was moved from the user's journal.

Reason:
:evil: keep it civil...this is your warning shot.

Extras: Filter Print Post Top
Re: Camplo's CJar's (moved) [Re: cronicr]
    #22759459 -

:goodshit:




Behold, Cjar 5.0!

Pyrex glass, polypropylene lid, 1/2 pint jar that has been thread into the lid... best version by far.
Soon to be fitted with silicon gasket.
I am going to fashion a way to mechanical keep lid tight. I am so anxious to try it out again that I might just use tape to hold it down tight on the silicon seal. So finally I have a real lid for my Cjars!

Calculating how much LC to use to inoculate a loaded Cjar has been challenging. The size of the jar requires a lot of mycelium to expect a full colonization within a reasonable about of time. Too much LC throws off moisture percentage.
I do know that regularly prepped grains (4-12hour soak and drain results in near 40% moisture) can take on a lot of LC.
Grain/sub mix do not respond the same way. Adding dry verm is the only way I now to help result in a final, acceptable, moisture content.
I don't want to use verm....its just another thing to run out of...I want to only use straw and grain. I want to use lots of LC... I'd like to be able to use slurry or grain to inoculate with as well...I can I want!!! :brushrage: !!!!!

Each one of those wants and don't wants comes with its own set of unique challenges to actually getting a successful Cjar, in the way I'd like it, that is.

So I could;
A- load the jar with straw/grain/dry verm, dry verm bed at bottom of the jar straw/grain mix on top
B- load the jar with straw/grain/dry verm, dry verm bed at bottom of the jar, all grain on top of that, straw on top of that
C- load the jar with straw/grain, all grain bottom, all straw on top.

So now that I can have a solidly sealed Cjar, I can shake without fear of leakage or bacteria contam from wet tape. But you can't really shake straw...it doesn't do anything lol, not to mention a evenly mixed sub, after shaking, is anything but evenly mixed, post shake.

So slurry and grain inoculations would only be useful for a run with straight grain that can be shaked, which is how I keep landing on LC as the best option.

The goal is to use 4 quarts dry grain which equates to something like 6 wet quarts. 180ml to 240ml sounds pretty good. I've seen 240ml be absorbed by 4 wet grain quarts as well pictured here
As well, with 240ml lc, if I add a bed, 1 quart dry verm, that is enough liquid to put the verm at the right moisture percent.....

I have yet to test the water holding capacity of dry straw. If I could do a dry straw bed instead of a dry verm bed that would be awesome...
So finally, as much inoculant as possible, No standing water, slightly dry yet even moisture content post inoculation

One thing I haven't considered is the dispersion effect of syringe. 140ml syringe...empty it while squirting in all possible directions...straw/grain/dry verm....call it good.


--------------------
:three:

Edited by camplo (01/10/16 01:14 AM)

Extras: Filter Print Post Top
Re: Camplo's CJar's (moved) [Re: camplo]
    #22760882 -

couldn't you throw in an entire plate or two?


--------------------
EAT GETS SHIT DONE


:flame::chief:JOIN THE POW WOW:chief::flame:

Extras: Filter Print Post Top
Re: Camplo's CJar's (moved) [Re: eatyualive]
    #22762691 -

I could, but imagine how long that would take to fully colonize. There will be ~ 2+ gallons of grain/straw. I think if I keep cutting back on the amount of LC I'll get to a point where I get enough mycelium in the jar and not too much liquid.

I could go straight grain for the sake of being able to use slurry, and once colonized, mix in straw.
Its another step to add but it would allow me shake while only the grain is loaded, and then recovery would be pretty fast.

The end goal is to birth the whole thing so I can't leave it straight grain. Another goal is to have straw be the sub.

I've been conversing with some people on the forum and they seem to think that I should be able to jiggle grain into the sub for good results. G2g would not mess with the moisture level and really like that.

A thick slurry is possibly another option that was brought up........UGH! either way G2G, or slurry, a good shake is needed. Maybe I can get away with a shake. I imagine that shaking a straw/grain sub would leave most of the grain piled together and the straw all together as well.

As long as the thing grows into something that holds its self together I will be satisfied, it don't have to be pretty.

I've already tried LC and LI, and even though it could be said I used them improperly, I think slurry and g2g are up to deck in the next runs of the infamous Cjar.


ps- Eatyou, what is the lowest water to grain ratio you've used to make slurry in order to make a nice thick slurry.


--------------------
:three:

Extras: Filter Print Post Top
Jump to top Pages: | 1 | 2 | 3 | 4 | 5 | 6 |  [ show all ]

Shop: Original Sensible Seeds Bulk Cannabis Seeds   Sporeworks.EU Spores for European Microscopy   Myyco.com Isolated Cubensis Liquid Culture For Sale   Mushroom-Hut Liquid Cultures   North Spore Bulk Substrate   MagicBag.co All-In-One Bags That Don't Suck   Unfolding Nature Unfolding Nature: Being in the Implicate Order


Similar ThreadsPosterViewsRepliesLast post
* gallon jars done ellisdee625 2,832 12 05/16/02 06:19 PM
by erotomania
* Re: Any 1 have experience using 1 or 2 gallon jars to colonize? Mycelium5150 1,209 3 08/01/00 04:09 PM
by Mycelium5150
* new TEK, Growing all in the jar? Damn 5,007 18 09/26/02 10:04 PM
by AgentOrange
* Corncob Mycelium Slurry wat do u think?? miguel6911 1,122 2 01/29/03 06:00 AM
by diggitydankman
* PF CAKE SLURRIES?? KaliedoscopEyes 3,288 6 08/13/02 12:04 AM
by Roadkill
* Not fully colonized cakes in blender? Fd3000 3,656 9 07/10/02 08:02 AM
by Hammerloaf
* blender BADBOY2 1,833 11 10/08/01 01:15 AM
by BADBOY2
* Corn Cob Slurry!! Phenix 1,094 3 03/14/02 11:27 AM
by Seuss

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: DERRAYLD, Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
7,731 topic views. 7 members, 510 guests and 246 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.041 seconds spending 0.011 seconds on 18 queries.