Home | Community | Message Board


This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: Sporeworks.EU Spores for European Microscopy   North Spore Bulk Substrate   Mushroom-Hut Grow Bags   MagicBag.co All-In-One Bags That Don't Suck   Original Sensible Seeds Bulk Cannabis Seeds   Myyco.com Isolated Cubensis Liquid Culture For Sale

Jump to first unread post Pages: | 1 | 2 | 3 | 4 | 5 | 6 |  [ show all ]
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
Re: Camplo's Gallon Slurry Jar [Re: invitro]
    #21695279 -

Auto-Summary
The post discusses creating a blade for liquid culture (LC) growth in a large container. The blade, made of stainless steel, is attached to a PTFE bushing in the lid and can be spun in reverse or forward to stir grains or mix substrates. The author recommends using minimal simple sugars in the agar, such as 2% malt extract, and low-sugar broths like 0.1-0.5%. They suggest using expanded grains, which are easier for mycelium to colonize. Various methods for making blades are mentioned, including using a stainless kebab skewer or magnetic stirring devices. The post also covers moisture management and injecting sterile water if needed.

I have a large container with a blade coming down from the top down, the bushing mounted in the lid. Here is a quote about it, a few paragraphs down but the rest might be relevant reading

blackout said:I was always told it was the simple sugars typically used in LCs which were contam prone (along with excess water). As mentioned the ~10-25ml agar plate will be adding sugars to your water. If sugars are the main worry then your agar could have no simple sugars, just be grain based. Some say myc grown on a agar made of the intended end substrate may do better, as its already gotten used to it, so may take it easier & faster.

In this thread Workman (of sporeworks) recommended a agar of 2% malt extract, and a broth of only 0.1-0.5%
http://www.shroomery.org/forums/showflat.php/Number/4332098#4332098
So his broths are as low as 1/20th of what the agar plate is. So blending up a "regular strength" agar plate is possibly making a broth he considers ideal. I understand the point that it is not given much time like this but still reckon it could be minimised. I wonder if 0.1% agar plates would be any use.

I have done many heavy LC grows, I was aware of contam issues so would let them colonise very well. I also avoid shaking grains by growing in their fruiting trays. Expanded grains suck up LC very well and I believe this is the key to rapid colonisation, its like micro bits of myc might be getting into the core of the partially dry grains rather than just sitting on top. You make expanded grains several ways, oversoaking and drying them off in a microwave to drive moisture out. Or baking/toasting grains.

I have made several "blades", the biggest is about 6" in diameter in a 5L tub and is all stainless passing through a PTFE bushing, this was for sclerotia grows, pulverising grains to expose the inner bits as it was not going to be reopened and so not contam prone. The simplest ones are simple stainless rods which are bent into an L shape. The lower part is hammered flat and sharpened. If only mixing up agar this may not even be necessary. And the forces needed in blending agar are minimal. My blades attach directly into a drill, i.e. I tighten the rod directly in the drill chuck. With this agar method there is probably no need for a drill, it could be turned by hand, so a strong bushing is not essential.

The simplest I can think of right now which is readily available would be a stainless kebab skewer

If you were lazy and did not want to bend and sharpen a blade it could possibly be used as is, you can see the rounded bit you hold should be able to blend up simple agar. The top end could be cut and stuck in a drill, or it could be bend over to give you a handle to turn it easily. A cork could be stuck on the end and twist it by hand, like starting a fire, rubbing it quickly between your palms. The bushing could be a test tube stopper or maybe an injection port. Mine are all PTFE. If you have a hole in your lid you could possibly build up a thicker lid by siliconing on little discs of plastic, so they form a stack maybe 1/2" high, then drill a hole through them all to put your skewer through. A heated skewer may be able to be pushed through the lot of them.

I have a few types of magnetic stirring jars, some which would easily blend up agar plates. I have a dismantled hot water pump which has a magnetic drive. There is a plastic part with turbine vanes in it which has 4 magnets held inside the plastic. The motor has 4 matching magnets and they are strong enough that I can spin the vanes when they are through a layer of glass. So I can sterilize jars with the enclosed magnets in the jars.

I also have large stainless ball bearings which are magnetic (some stainless is not magnetic). These are also attracted by the same motor with magnets and so I can spin the ball bearings in the jar at very high speed. A very simple device could be made like this. If you had magnetic stainless steel self tapping screws in your jar they would easily cut up agar. Now all you need is a strong magnet to attract them through the glass, it may be possible to just pull the magnet back and forward to blend it up. If not a magnetic stirring device could be made for a drill. You get a rod of metal, bend into an L, glue the magnet to the end of the L shape and stick the other in the drill, now you have an off centre magnet so when the drill turns the magnet spins around in a wider diameter, pulling the screw with it.




Quote:
invitro said:
The blades aren't sharp on the back edge though and that's what you would be working with if you spun it backwards.



My 6" blade in the large tub is folded on the non cutting sides. It rotates centrally and has folded blunt steel bent at 90 degrees about 10mm high. When the drill is ran in reverse this stirs grains, when run normally it acts like a blender, the folds also mix up the substrate so it cuts better.

I wanted this tub for sclerotia, my idea was to use rice which does not shake easy, and be able to stir and cut it up. If growing grains like rye/wheat/oats/barley I was thinking that after it is fully colonised it could be chopped up and let regrow over the now exposed grains. Exploded grains are usually said to be prone to contamination, but you would be letting it colonise fully first and be chopping up in a clean environment. I think this extra growth might be more than what you would get in a typical LC, if you strain an LC you see just how little there is, I think a large tube of fluffy airy grain might take off. Sterile water may be injected if it looks dry, and it could be chopped up again.

Moisture levels should not be a problem, you simply weigh and calculate what moisture is needed. If you saw 60g of coir need 1000ml of water to be at the right moisture level then you can add 500ml to 60g and heat treat it and add 500ml of slurry to hydrate. I often drive off moisture after adding excess water to substrates and microwave it until it drops in weight, while heat treating at the same time.

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: blackout]
    #21710504 -

I could post a pic but it would be boring....I don't know how to call it. I mean the mycelium was obviously recovered on day 2. I attribute that to the coffee, known to cause such things. I used a quart of slurry to a large amount of water and  that turned out to be very positive as well because mycelium is pretty much already on everything, already, but that doesn't equal 100% colonization until its all nice n white. Its like there's a thin film of mycelium on everything but beyond the first signs of recovery growth has been very slow, even on the top most of the jar. I think either its because its too dry or because I made the substrate supper nutritious from the flours and malt and what not. A overly nutritious sub causes slow growth as well. I could also consider that the grain has not been "cleaned" in anyway. I don't really care that its growing slow, my curiosity is why. I plan on adding water when it hits two weeks old. I did not account for the flour in adding moisture and as well rice can hold ALOT of water so it might be offsetting the rest of the grain....maybe. I can't keep track of weight cause its so large. If I adjust the water to what would of equaled 50% that should suffice. But really it hasn't stalled, its just going slow, so I might just leave it alone.


--------------------
:three:

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: camplo]
    #21745230 -

Well, the other jar is not finished colonizing, Colonization is going super slow from a combination of many wrong factors, no grain prep, dense & deep substrate, slowing ventilation of itself, moisture content questionable, as well all the flours and malt added to create a overly nutriated sub . But on the bright side, I have proven the jar to be sterilize-able and sufficiently sealed. No contamination has set in. No funky smells nor mold. I even added some water to it at one point but lets move on.

This is the next step. When I prepare this jar I will follow common grain prep technique to get the grain clean, moisturized and ready for some good healthy. I will likely use the same recipe minus the malt, brown rice flour, soy flour, and baby food powder but instead I will keep the coffee and add gypsum, as well use straight verm.

In the picture above is my solution to ventilation for deep dense sub. The invention is just 3/4inch copper pipe and fittings, the whole thing cost less then 25 dollars in parts (with spare pipe) all available to anyone at a hardware store near you. I will perforate the copper tubing with holes and they will server to ventilate the jar from top to bottom and through the core.

I consider this to be the last chapter in the design and see no other major flaws, construction is simple, materials are cheap. I hope to show soon the end the result of a mycology tool to create "large" amounts of substrate that can be kept sterile until 100% colonization.


--------------------
:three:

Edited by camplo (05/31/15 05:40 PM)

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: camplo]
    #21745688 -

Cut slits every so often down the sides of the pipe, and on the fittings, about 1/8th or so thick. Plump grain hopefully won't go through, if so, I have a solution for that as well, lol, I think it will be fine though.



--------------------
:three:

Edited by camplo (05/31/15 08:01 PM)

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: camplo]
    #21745696 -

pretty slick build there.


--------------------
EAT GETS SHIT DONE


:flame::chief:JOIN THE POW WOW:chief::flame:

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: eatyualive]
    #21745742 -

Thanks! I am stuck on packing this thing with as much grains as possible. 6 dry quarts to 6 quarts of verm. I sorta kinda want the top most layer to be something fruitable, like straw or coir, maybe verm?  With something like 3% coffee. I'll probably slurry a quart in the coffee. As well soak the grains in it. Coffee is the shit...
:holyshitbubbles:


--------------------
:three:

Edited by camplo (05/31/15 08:24 PM)

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: camplo]
    #21747131 -

camplo said:




Good idea on the vents, I would have used PP tubing for a few reasons.

The cuts look a bit rough and might be hard to clean afterwards, slits could be melted in PP, or loads of holes either drilled or melted in.

Copper is pretty expensive.

Copper has antimicrobial properties. So it might stunt growth on grains in contact with it,
http://en.wikipedia.org/wiki/Antimicrobial_properties_of_copper


I am not sure of the effects, it might be minimal. I considered using copper tubes in a large jar as a means of transferring heat to the core of the jar during heating.

http://www.shroomery.org/forums/showflat.php/Number/20923706
Quote:
Large Container with Copper Tube Cores
First idea was to use a 2.5L plastic PP5 bucket shaped container I already have used for bulk grains, it is large so needed a long time. My idea was to drill holes in it through the top and a matching set of holes on the bottom, maybe 5-8 holes, and then have hollow copper tubes running through each of these holes, even just a single tube in the middle would help hugely. These tubes would be held in place with silicone tubing and jammed into the holes which are a larger diameter than the copper tubing, but smaller than the silicone tubing diameter. This means steam can travel up the tubes and heat will easily conduct into the copper and be readily transferred to the grains. So the core of the container will quickly reach temp. The space taken up by the copper tubes is minimal compared to the space usually wasted by multiple jars. Even copper solid rods would help conduct heat to the core.



In another thread I was suggesting aluminium tubes. Your venting idea could be used on these heat transfer tubes too. Just drill small holes in the copper along the sides and then put filters on both ends of the copper outside of the jar/container. It might restrict the easy flow of steam that I wanted through the pipes but it should also end up with steam transferring into the jars. It could cause moisture issues because of this, a smaller version could easily be tested, one which does not need the venting or heat transfer advantages -but just to test.

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: blackout]
    #21754894 -

Quote:
Good idea on the vents, I would have used PP tubing for a few reasons.



Quote:
Copper is pretty expensive.



The cheapest source of PP tubing I found was 55 dollars for a 100ft or something like that.
I paid 12 dollars for a 10ft pipe of which I used maybe 3ft of and the fittings where 99 cents a piece...
I wanted a material that anyone could easily get, which ordering from the internet is pretty convenient, but some people prefer going to get it immediately. So far the hardest to get material in the build is the poly carbonate which I ordered off of ebay and costed like 14 dollars for a huge sheet. 

Quote:
The cuts look a bit rough and might be hard to clean afterwards, slits could be melted in PP, or loads of holes either drilled or melted in.




They are a little rough and likely will have some substrate on them when the time comes to reset. Maybe I could just scrub and pour boiling water on them at that point. Drilling holes, I would need a drill press, I tried drilling holes for like 15 seconds and was like fuuuuuuuck this, lol. Slits are much easier and provide much more open area.

Quote:
Copper has antimicrobial properties. So it might stunt growth on grains in contact with it,



In that case I would hope that this would prevent any contamination growth on the pipe, being that it will be sterile, un-colonized, and exposed to dirty air upon removing the lid for fruiting. I have considered buying copper end caps (also super cheap), more like a necessity, to put on before casing. Or if I bring the slits closer to the top I could just cap it from the get go. After reading that article, I feel a little unsure, hopefully the copper won't be poison to the surrounding mycelium! only time will tell.

Quote:
a smaller version could easily be tested, one which does not need the venting or heat transfer advantages



I think you mean a small camplo jar? I wouldn't have to go that far. If I wasn't so interested in pushing the boundaries of what has been done already, I could just load it with grain 4 inches deep and call it good.

I didn't consider the benefits regarding sterilization. It should help plenty, mostly ventilation for steam to excess the inners of the grain but heat transfer to boot. As far as throwing moisture off. I don't see how....but theres plenty of things I don't see. Guess I'll find out. Soon as I prep some grain!.... I just accidentally dumped out my grain in the backyard....I'll try again tomorrow, lol.

Thanks for your input, gives me something to think about, as well, play devils advocate. Eventually I'll get it right. If copper is too antimicro for this to work then I'll have no choice but to use PP tubing. Just think, 6 dry quarts, which ends up being something like 18 wet quarts the way you guys fill your jars, all in one inoculation! Money, in the bank.


--------------------
:three:

Edited by camplo (06/09/15 10:54 PM)

Extras: Filter Print Post Top
Camplo's CJar's [Re: camplo]
    #21775041 -

Well this is all R&D. I am the investor, designer, engineer, and laborer. Onward!

This is the first guy. he never fully colonized into a white colossal mass like I hoped. But I did a lot of things that where not optimal for growth. Not to mention the infant formula might have some antimicrobial characteristics from what I read.The water content was off. i was on the high side for sure. The water I added, the second time, never took all the way. The top colonized well in between the spaces of grain and surprisingly the same is true till about half way down. I took the best growth out of the jar and buried it.

So this is the new guy, Grains prepped in a soak, verm hydrated properly. Coffee & Gysum is the only additive I used this time around. I cannot shake this one because of the structure in the middle. It would be best if the bottom of the jar colonized the most, first, but with the vent tubes it shouldn't make a difference. The first pc cycle went well accept for a leak in my pc lid ring. Maybe a tiny rock? When all was done I opened her to see my jar lid had been breached due to steam pressure from within the jar. I went too light on the duct tape. So I had to pressure cook a second time after fixing the lid. I was so worried about it being too dry from excessive pressure cooking I calculated an amount of water to add before pressure cooking again. Turned out pretty good except now I have about 30% busted grain where as the first pc run I had non. I'm ok with this penalty with the trade off that I know the water content is not too low.

Soooo this is a pretty cool to note. On the second pc run I oiled up the pc lid ring and it did not leak at all. Experienced growers know that the pc has a tell for when everything in the pressure cooker is up to temp. The stove burner is able to keep pressure at what we notice to be the lowest setting possible from what we've experienced from many pc cycles in similar conditions, same stove, pc, room temp, etc. Well, I noticed that I pretty much reached that point at about 1.5 hours into the cycle. I don't recall to a T but the first project did not go that way. i attribute this to the ventilation tubes, conduction and convection, whatever. The tubes definitely affect how fast the inside of the jar heated up and I speculate that a 2.5 hour run would be good enough for success.

In this jar I was able to fit 4.5 quarts of dry grain amounting just under 7.5 lbs of grain. The other 4.5 quarts would be vermiculite, as I mixed them 50/50. that left about 1 inch of space for a casing. The grain was soaked in coffee and the verm was hydrated with coffee amounting ~3% of volume/weight. I also left the coffee grains in. Something like 2 cups of powdered gypsum in the whole thing. I bought a fricken Bunn commercial coffee grinder off of craigslist for 25 bucks, its worth 150 easily. It grinds the whatever to powder something like baby powder.

So today I opened the pressure cooker that sat over night, one of the tyvek filter disc had gave way to vacuum, but my lid has two disc separated by a gasket....so its still sterile....(thank God). I have some sheets of poly somewhere....anyway. I decided to not use so much inoculant since I cant shake anyway, plus I don't want to offset the moisture too much so I took a colonized quart jar, filled it with sterile water, shook it for a while, then poured what turned out to be about 100ml into the tube that had been positioned directly under the cjar lid. I inspected the underside of the lid in the process and the remaining filter did not breach. Only thing about the process I did not like was that the jar of sterile water had a vacuum upon opening. Next time I'll use a vented lid. It all went down in front of the flow hood...but still..I keep things tight. Now we wait.


--------------------
:three:

Edited by camplo (06/07/15 11:44 PM)

Extras: Filter Print Post Top
Re: Camplo's CJar's [Re: camplo]
    #21785741 -

Its been 2 days, I would expect to see growth today, coffee seems to cause noticeable growth after just 2 days. But I didn't go home today...So I thought I'd share a pic of my, new to me, AA 925 with aftermarket parts. Maybe someone could enlighten me on how to use the damn thing!?


--------------------
:three:

Extras: Filter Print Post Top
Re: Camplo's CJar's [Re: camplo]
    #21790040 -

If someone could enlighten me on how to use that pressure cooker I'd appreciate it. Rather not open a new thread. Anyway, back to the main event!

There is some growth on the grain that inoculant was spilled on at the top as I poured it down the pipe. Taking a picture of the growth at the bottom of the pipe, which there is just as much if not more, would be silly. The glass on the bottom of the carboy is all thick and squirrelly. But non the less there is growth all around the vent where most of the inoculant drained to. Theres even a tiny bit of growth on the wall adjacent to the pipe that the inoculant was poured down. So, I have no doubt that this thing will reach 100% BUT how long! All that grain vs. 100ml of mycelium water. Just weak. I'd like at least 30 mils per quart. I mean I still have a fully colonized quart jar, which was used to create the inoculant, and thats cool, but we might be looking at 3 weeks till fully colonized. I potentially could have created 2 quarts of slurry, 1 part water 1 part grain and then rotated the jar to spread the liquid....Choices....ugh!!!

Welt, I do have another Cjar thats emtpy so.... I wonder if I prepare the grain like I normally do, which is an overnight soak, and then add 1 quart of water via the slurry, would that be too much much additional water. I wonderrrrrr.


--------------------
:three:

Edited by camplo (06/10/15 09:47 PM)

Extras: Filter Print Post Top
Re: Camplo's CJar's [Re: camplo]
    #21799975 -


The growth at the top of the jar is much thicker now, could not get a picture due to the condensation on the lid at the moment. This growth was barely noticeable at the time of the previous picture and now has grown to this. Inoculant must of hit a piece of grain on the slide down the pipe as this is a wall adjacent to the bottom of the vent pipe, so therefore this growth extends from the pipe to the wall I would guess. A few grains that scattered on the top surface are sprouting growth as well. I still wish I had of used more inoculant but so far so good.


--------------------
:three:

Extras: Filter Print Post Top
Re: Camplo's CJar's [Re: camplo]
    #21824991 -


I share this picture in frustration, the growth is probably within normal, its pretty healthy looking, not as fast as I'd like though. There's growth on the bottom and top, the picture is where the most accumulated growth is.

As I've stated I have an empty one and when ever I feel like it I will start on it. I still think that if I get the water amount right I can add the water as a slurry like I did the first time. Or scenario B, I hydrate the grain properly but load the verm dry (4.5 quarts), allowing for about a quart or more of water to be added, no problem. That's probably the better plan but the advantage of adding the water after sterilization, to dry grains, is that it takes out the grain prep process completely, as well, cuts down on pc time and allows better sterilization in general. Plus now with the vent-bar even more better.

Also remember this picture

Afterward twisting and turning for mixing, the verm and perlite where no longer evenly mixed. To keep the substrate evenly distributed I would like to just twist and turn the jar to disperse the mycelium. If I go with scenario B it should work out nicely I mean a quart of super dense mycelium water along with a quart of colonized grain....slurry, poured into the sub, into the vent-tubes as well....its nothing but win written all over that...


--------------------
:three:

Edited by camplo (06/18/15 09:10 PM)

Extras: Filter Print Post Top
Re: Camplo's CJar's [Re: camplo]
    #22164668 -

Did the second jar stall?  I'm thinking the copper pipe idea is inherently flawed.  Here is an example to explain my thinking.
I filled some quart jars all the way to the top, well maybe 1/2 cm of head space give or take, then added LI slurry as innoculant.

Freqently what happened is the myc extended up into the SFD, clogging it.  When that happened, the jars stalled.  The slits in the copper pipe possibly got clogged, defeating the purpose.

Maybe if you inverted the pipe assembly then somehow managed to wiggle it back and forth after partial colonization that could widen
the holes made by the pipe and make for better airflow.  You could get a ball bearing in the lid and attach a rod from the pipes through the bearing and then have a handle that could help spin the rod.

Extras: Filter Print Post Top
Re: Camplo's Cjars [Re: camplo]
    #22555242 -


So I got this jar right. I think I may have all the kinks out of the way. I think.... So lets say I've finally created a giant jar with a canning jar lid even. That won't contam after cycled properly... 6 dry quarts of grain turn into like 4 inches of grain dept wise, inside the jar, after hydration. The lid, I made of ez-felt, so I may or may not have to cover some of the surface area to limit evaporation, which is possible. I can't really shake it, cause I'll get substrate material on the filter...maybe? If its just straight grain, it might be ok, the filter is 3 layers thick. There is enough room to roll and slightly shake without touching the lid.


Does anyone have any ideas?


My craziest idea is to create a giant LC, and then add dry grain. But it seems that if I had the dry grains inside first, and then just pour in the calculated amount of LC that that would be a much easier way to go....I just think its funny to have a giant lc in a jar like that. What if created a batch lc like 4 gallons worth? What could be the purpose?
:mindblown:


--------------------
:three:

Edited by camplo (11/21/15 02:12 PM)

Extras: Filter Print Post Top
Re: Camplo's Cjars [Re: camplo]
    #22556571 -

:popcorn:


--------------------
EAT GETS SHIT DONE


:flame::chief:JOIN THE POW WOW:chief::flame:

Extras: Filter Print Post Top
Re: Camplo's Cjars [Re: eatyualive]
    #22556585 -

you know you can use bags right?:rofl:


--------------------
It doesn't matter what i think of you...all that matters is clean spawn
I'm tired do me a favor

I'M A MEMBER FIRST, TC WHEN NEEDED AND MOD WHEN I HAVE TO BE !!!

Extras: Filter Print Post Top
Re: Camplo's Cjars [Re: cronicr]
    #22556717 -

They don't make bags big enough to hold the amount of grain I am attempting to do, and bags are not exactly made to be reused over and over again, so close but no cigar so :woah:


--------------------
:three:

Extras: Filter Print Post Top
Re: Camplo's Cjars [Re: camplo]
    #22557005 -

can't wait to see some fruits


--------------------
It doesn't matter what i think of you...all that matters is clean spawn
I'm tired do me a favor

I'M A MEMBER FIRST, TC WHEN NEEDED AND MOD WHEN I HAVE TO BE !!!

Extras: Filter Print Post Top
Re: Camplo's Cjars [Re: cronicr]
    #22557073 -

Maybe buy Mirro 22 qt pressure cookers for 60 bucks, fill them with grains over a screen, an inoculate with LC/LI through the vent pipe in a flow hood then stuff with sterilized poly from your OH FUCK I DON'T HAVE A PRESSURE COOKER?

I actually wanna try this now.  If I get a 2nd PC maybe I will.

5 galon jar


--------------------


I spawned some popcorn casings and had double-overlay cause I didn't put enough hydrogen peroxide in my automated aquarium mister.  I only got one mushroom so I cut off the head part where the seeds fall from and put it in a jar of LC and sprayed it all over a tin of PF cakes I made with gravel, cardboard, and bisquick in my microwave.  I think it will be good cause B+ is so potent.
Triggered yet?

Only a square would say "a cube is a cube."


No, this does not look right...

Extras: Filter Print Post Top
Jump to top Pages: | 1 | 2 | 3 | 4 | 5 | 6 |  [ show all ]

Shop: Sporeworks.EU Spores for European Microscopy   North Spore Bulk Substrate   Mushroom-Hut Grow Bags   MagicBag.co All-In-One Bags That Don't Suck   Original Sensible Seeds Bulk Cannabis Seeds   Myyco.com Isolated Cubensis Liquid Culture For Sale


Similar ThreadsPosterViewsRepliesLast post
* gallon jars done ellisdee625 2,832 12 05/16/02 06:19 PM
by erotomania
* Re: Any 1 have experience using 1 or 2 gallon jars to colonize? Mycelium5150 1,209 3 08/01/00 04:09 PM
by Mycelium5150
* new TEK, Growing all in the jar? Damn 5,007 18 09/26/02 10:04 PM
by AgentOrange
* Corncob Mycelium Slurry wat do u think?? miguel6911 1,122 2 01/29/03 06:00 AM
by diggitydankman
* PF CAKE SLURRIES?? KaliedoscopEyes 3,288 6 08/13/02 12:04 AM
by Roadkill
* Not fully colonized cakes in blender? Fd3000 3,656 9 07/10/02 08:02 AM
by Hammerloaf
* blender BADBOY2 1,833 11 10/08/01 01:15 AM
by BADBOY2
* Corn Cob Slurry!! Phenix 1,094 3 03/14/02 11:27 AM
by Seuss

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: DERRAYLD, Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
7,731 topic views. 6 members, 362 guests and 163 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.039 seconds spending 0.014 seconds on 20 queries.