Home | Community | Message Board


This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: Unfolding Nature Unfolding Nature: Being in the Implicate Order   Original Sensible Seeds Bulk Cannabis Seeds   Sporeworks.EU Spores for European Microscopy   MagicBag.co All-In-One Bags That Don't Suck   Mushroom-Hut Substrate Bags   North Spore Bulk Substrate   Myyco.com Golden Teacher Liquid Culture For Sale

Jump to first unread post Pages: | 1 | 2 | 3 | 4 | 5 | 6 |  [ show all ]
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
Re: Camplo's Gallon Slurry Jar [Re: camplo]
    #21265862 -

oh man coming back to look at this when i have time.:biggrin:


--------------------
EAT GETS SHIT DONE


:flame::chief:JOIN THE POW WOW:chief::flame:

Edited by eatyualive (02/12/15 09:52 PM)

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: eatyualive]
    #21268964 -

Another idea I just thought of. This device would serve well to create outdoor cultures.


--------------------
:three:

Edited by camplo (02/20/15 01:57 PM)

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: camplo]
    #21343575 -

Anyone have any ideas of how to use this damn thing? lol funny cause I'm the one who made it right?

Well from the experiments I've tried so far, the concept seems to prefer Rye grain or the like, versus brown rice. Rice fricken expands like crazy and I want to keep nutrients concentrated in the grain not spread out. I have two jars that I am going to experiment with.

My best idea so far is to take a mixture of Rye and Millet, soak over night, I may or may not drain and rinse, not sure yet, load jar with like 2.5 quarts of soaked* grain, inoculate, and then stir after about 3 days.

I know that if there is not enough water in the jar before blending that the mix will turn into something like a ice cream shake consistency, which is why the soak is important so that the grains do not take on more water... My guess is that growth would be super slow in a milkshake of grain. Potentially if I were to blend at a low enough speed it won't turn into a shake but cause enough agitation to spread out the growing mycelium, I'm going for something like a heterogeneous mix of water and grain where as if I where to blend it to hell it would become homogeneous, so that is where the drill would come in handy. After I feel the culture is 100% or close enough I could then use the blender to finish out to create a slurry.

I can't believe I'll be the first to try to create a heterogeneous liquid culture!? Basically a grain lc that has whole grain in it.

ps- if anyone has any ideas they'd like to see me try or comments, let them fly.


--------------------
:three:

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: camplo]
    #21352510 -

Food for thought:

Regular blender blades are designed to push the blended material upward, to avoid compaction.

There are specialty blades made for grinding hard things like grains which push the material down.  I think for li on a larger jar you would want these blades (many people have commented that it's difficult to blend quickly/efficiently in large jars, thus the necessity of 1/2 pints for good performance).  You'll have to search for them but I know they are out here, it's just a reversal of the angle of the blade.  In other words if you took the blades off the ball bearing+assembly and flipped them over you would get the desired effect.

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: invitro]
    #21352946 -

Interesting, I think that would be an improvement to the cjar. If there where a way to reverse the rotation of the blender that would have the same affect as well.


--------------------
:three:

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: camplo]
    #21352960 -

The blades aren't sharp on the back edge though and that's what you would be working with if you spun it backwards.

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: invitro]
    #21353193 -

True that. Either way, with regular blades, I bet, we'll get functionality, as well, the blades you speak of sound like an improvement on the design and I am glad you commented.

You must note, in the beginning of the process I don't want to slurry the grain, I just want to be agitate the the mix in order to spread mycelium, just like in a regular Lc with a stir bar.

I'm interested to see how might a Heterogeneous Liquid Culture may, or may not benefit mushroom cultivation.

Finally got my replacement hepa, put the finishing touches on the flow hood, already have a plate of clean colonized agar, should have some results coming up.


--------------------
:three:

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: camplo]
    #21527952 -

Any updates?

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: invitro]
    #21530285 -

The best use I can find for it is to create large amounts of slurry. It has the advantage over a regular blender being that you can also put a sealed lid on it and temporarily store it. As well, pcing grains  in any amount of water over what would saurate teh grain is just crazy. Grain, under pressure, in water, equals tons of expansion, I broke about 2 of these contraptions because of grain expansion. The main problem for me is that with the blade assembly being on the bottom, it will leak liquid eventually. I don't trust that, so, for making slurry, its perfect, storing, no. I'm going to use it to make slurry when I inoculate this Which I've dubbed the official Camplo Jar, to be the flagship of the Camplo products, along with the Camplo Slurry Jar, and some large 2.5qt grain jars that are still in RnD (lol). As you can see I went with a turkey oven bag for the glove which serves the purpose of mixing up substrate after inoculation. You don't need a glove. But I wanted it. Everything is sealed with silicon except for the lid itself, i plan on using medical tape for that.

Its basically ready to roll, I need to figure out how I'm going to use it. Generally I'm thinking 1:1 grain/vermiculite, 8 inch deep. I'm going to try and hydrate grain for about 18 hours, inside gallon jars filled to the top, that has a lid so the grain won't expand a lot. Rinse the grain, and mix vermiculite hydrated to about 25% to volume. I need to figure out how much of the mix I need to hit 8 inches of dept. I plan on pcing for 4 hours at 15psi then slurry 1 quart of grain to 1/2 quart water and inoculate with that in front of flow hood.


--------------------
:three:

Edited by camplo (04/10/15 10:34 PM)

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: camplo]
    #21598700 -



Some reinventions of the lid. The one I'm settling on is the polycarbonate with no "arm hole"....sounded good in theory. It (arm hole) might be an asset in particular situations but I think I should be fine inoculating with slurry and just shaking. I'll seal the lid with micropore tape and duct tape. I have changed my mind about hydrating before pc. Instead I plan on weighing out all the ingredients dry, and then adding the desired amount of water along with slurry. Grain have no problem absorbing water and the vermiculite will hold excess water until it adsorbs into the grain. As well, pcing the load dry has its benefits over having to do so wet! My goal is to only have to shake once, hence the large amount of inoculant.

Plan is still ~2 gallons of dry grain. 1 gallon of perlite/verm mix. I'll likely reduce the grain to like 1.5 gallons...but I don't want to if I don't have to!
I might add some brf, soy, & coffee, as well I have been considering using Malt LC to create the slurry with instead of straight water...lol. I'll take a quart of grain and slurry it in the c-jar v1. And inoculate c-jar v2. Really going for maximum affect.

Any advice is appreciated, I haven't settle on how large of a hole for GE.


--------------------
:three:

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: camplo]
    #21687311 -

Auto-Summary
The post introduces a custom sterilizable bulk container called the CJAR (Colonized Juice Accumulation Reactor) designed for grain bulk inoculation in mushroom cultivation. The author, interested in creating such a device since 2008, describes the CJAR's features, including its ability to accommodate various substrates and maintain contam resistance post-100% colonization. The container is filled with a mixture of grains (rye, millet, brown rice, white rice) and vermiculite/perlite, with a slurry of colonized grain, malt, rice flour, soy flour, and coffee added for nutrient boost. The author emphasizes the importance of proper shaking to ensure even distribution of the slurry and successful colonization. After inoculation, the CJAR successfully colonized within 2-5 days at 65-69°F, with visible mycelium growth throughout. The author also discusses potential fruiting methods, such as casing from the top, and encourages feedback from experienced cultivators.

As the saying goes, if you want something done right...you do it yourself....so I made this, lol. Honestly I've been interested in creating a sterilizable bulk container since I started learning mush cultivation and have posts on the topic dating 2008. As usual, the idea was shot down here but if those people where smart enough to understand why someone would want to have such a thing....they would of designed and made it themselves, lol, guess thats where I come in. With this contraption named the CJAR, I can do grain in bulk quantities in one inoculation. As well, I can use any substrate that is usable, from wood to manure. The icing on the cake (no pun) is that once its 100% colonized, it will be contam resistant, just like pf cakes, so I should see a lower contam rate, as well, being that the mycelium has no friends living with it unlike regular pasteurized bulk.

2qt Rye
2qt Millet
1qt Brown Rice
1qt White Rice
2.5qt Verm
1.5qt Verm/Perlite
The grain proportions are whole, dry, quarts. My main focus was to concentrate as much nutrient into the CJAR aka "bomb" lol. I like the name bomb because no matter what goes inside this thing, its going to go off like a bomb, lol!, either I'll get a shit load of mushrooms or contams, either way, it will not be in small proportions! I pressure cooked it for 4 straight hours in as much water as I could fit into the pot without the cjar floating. I believe the water serves as a blanket for the glass so that once the cycle is up, any cold air that might get a chance to enter the pc will not be able to get to the thick of the jar causing it to crack. I let it cool, over night, inside the unopened pc. I also put the cjar in a pillow case so I could easily remove it from the pc.

So the CJAR is 10 inches tall (10-11 inches wide), loaded dry, the substrate was 7 inches in depth. I didn't think that was overkill enough so I decided to use nutrient material in the slurry as well. First I figured the amount of water I wanted to add to achieve a percentage of moisture. I figured the numbers by weight of grain and 25% volume of vermiculite then I figured the numbers via volume of substrate and settled on a number. Osmosis probably wins so the number I chose, 3200ml, should give the sub ~40% moisture by volume.

So I took a quart of colonized grain and "slurried" it in ~1950ml (1250ml was in the 2.5qt jar) of water with Malt, Brown rice flour, Soy flour, Maxwell bold coffee, all at ~200 grams each. Conveniently my slurry jar and the 2.5 quart jar both can fit in the pressure cooker , which I did so for about 45 minutes at 15 psi. I put slurry in quotations because upon running the slurry jar on the blender base I did not achieve any minced grain. Someone commented before that this would probably go this way because of the slurry jars volume. The mycelium was very well washed from the grain and mixed into the concoction. I blended for about 15 seconds on low and 15 on high, as well as another 15 seconds on high right before inoculating the cjar.

The operation went smooth. I used a sterilized spoon to get the grain into the c-slurry jar, then set myself up to pour the two jars of liquid into the cjar, in front of the flow hood.



The hardest part was shaking the damn thing. It weighs a lot! 10lbs of grain, 7lbs of water, and I forget how much the jar was by its self. First the coffee and flour settled to the bottom keeping the water from seeping into the grain. So I went with a twist, back n forth on the table top. The seal has to be water tight. I recommend testing your jar for leaks before using. The shake process also dirties the shit out of the filter. I have designed a filter that can last but I feel you should switch lid/filter assembly once the shaking process is done, I did. After enough twisting, I got aggressive with it and the silt floor gave way and the water finally drained into the grain/verm/perlite mix. Next I sat it in my lap on an angle and on rolled it back in forth on my legs. Talk about a work out! Towards the end of the process as there was not so much pooling water I turned the cjar completely on its side, on my lap, and rolled it back n forth with much force. I considered the shaking process done once there was practically no pooling water on the bottom. Once shaking was done I changed the lid/filter to a clean one. The verm collected some what, seems to not be a problem. The whole shaking ordeal lasted for the better half of a day. I would shake until my arms got tired, let it sit for 30-45 minutes then repeat, I feel like there where like 4-5 shaking sessions. Ultimately I just wanted no pooling water before I walked away

So I put it away and came back to it 2 days later to find it had recovered already! I was excited to see growth, not just because it was only 2 days later but because it was resting at 65-69 degrees the whole time which would slow things noticeably. Eatyualive brought slurry to the front stage and I must say that it works very well. I had a white glow of mycelium on everything in the cjar on day 2. These following pics are 4 days post inoculation, still at 65-69 degrees.

Even the residual substrate on the lid has the white glow of spreading mycelium on it. There is not a piece of sub that is without mycelium growing on it. Slurry for the win on that one! These pics are 5 days post inoc. For a period, I have introduced warmer temps to the jar but as it gets close to 100% colonization I might be wise to keep it in a cooler place. I'm so happy to see growth like this at the bottom of the jar, the place with the least amount of GE. The growth is even stronger at the top so so far so good!

How this thing will be fruited, granted it successfully colonizes, is not set in stone, I hope to hear from Violet and MudaFuka, or anyone else inclined, in regards to possibly casing it and fruiting it from the top. But if no one is interested in helping me, I made it this far...lol, I really would like to some how case the whole thing, like a giant cake, rolled in cvg allowing maximum fruiting surface. Pretty much the same advantage that a straw log has. With a prolific pinning isolate/clone imagine the crop from just one flush!!!!

Warning- If you have bad sterile technique, like say you can't successfully do LC for example do not I repeat do not attempt this project until you reach that level.

Edited by camplo (05/16/15 11:59 PM)

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: camplo]
    #21687347 -

:popcorn:


--------------------
It doesn't matter what i think of you...all that matters is clean spawn
I'm tired do me a favor

I'M A MEMBER FIRST, TC WHEN NEEDED AND MOD WHEN I HAVE TO BE !!!

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: cronicr]
    #21687369 -

:takingnotes:


--------------------
HUSTLER
How U Survive This Life Everyday Resourcefully
epic GT mono tub
http://www.shroomery.org/forums/showflat.php/Number/17277772

wbs tek
http://www.shroomery.org/forums/showflat.php/Number/11525679
coir tek
http://www.shroomery.org/forums/showflat.php/Number/11917410
results :thumbup:

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: tripdawg420]
    #21687745 -

Looking good! Hope it works out.:thumbup:

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: MushSicle]
    #21688390 -

I found some errors in my calculations. The moisture percent by volume is actually spot on 40%! 40% was my orignal intended goal anyway. Its over the amount of water if I figure 40% by weight of grain and 25% volume of verm, so its not short on water, but like I said, I feel osmosis is the deciding factor, so deciding the amount to add, by volume, is the way to go. The water should, for the most part, spread out until even as possible by the affect of osmosis....cause thats what osmosis is

Quote:
Osmosis is the spontaneous net movement of solvent molecules through a semi-permeable membrane into a region of higher solute concentration, in the direction that tends to equalize the solute concentrations on the two sides.




--------------------
:three:

Edited by camplo (05/16/15 11:04 PM)

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: camplo]
    #21689893 -

How do you keep it aerobic through colonization in the center? I would imagine the of time at 15psi being hours and hours. I like that you're doing what you want to do but those are my concerns

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: bodhisatta]
    #21689941 -

I love that you're experimenting and this is indeed pretty interesting.

Still trying to wrap my head around the idea of this process. So you take this big jug full of spawn material and basically mix it all and let it colonize then just use it as spawn right? So the intention is to replace the method of making multiple grain jars? Maybe I'm not getting it.


--------------------

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: audiophoenix]
    #21690030 -

Nice camplo. When i have more time ill go through this in more detail.


--------------------
EAT GETS SHIT DONE


:flame::chief:JOIN THE POW WOW:chief::flame:

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: eatyualive]
    #21690396 -

6 days in, its been in the 80's. I'm not seeing as much growth as I would like to see...but I do see significant growth and thats what we want to see. With the concentration of nutrition from the slurry concoction its going to probably start off slow and finish strong. Thats my prediction at least

Quote:
How do you keep it aerobic through colonization in the center? I would imagine the of time at 15psi being hours and hours. I like that you're doing what you want to do but those are my concerns



Well, from what I've studied, you can use horse manure at depths of up to 8 inches. Grain is even less course than manure so I don't believe it will be an issue being that the dept of this sub is also about 8inches. It is a concern of mine, all I can say is that I was happy to see growth at the bottom layers of the jar and hope that it continues, lol. I used perlite specifically to aid with that and the verm should aid some as well.

Quote:
Still trying to wrap my head around the idea of this process. So you take this big jug full of spawn material and basically mix it all and let it colonize then just use it as spawn right? So the intention is to replace the method of making multiple grain jars? Maybe I'm not getting it.



Well, you know....you could do that. As long as the whole thing colonizes 100%, I could open her up and use the colonized grain to do multiple projects. Since I'm going for the overkill factor I am either going to case the top of it and fruit it that way or birth it from the container, roll it in casing material and fruit it from all sides like a gigantic pf cake....


--------------------
:three:

Edited by camplo (05/17/15 02:42 PM)

Extras: Filter Print Post Top
Re: Camplo's Gallon Slurry Jar [Re: camplo]
    #21691733 -

It would be fun to see it turn into a gigantic pf cake :lol:

You could probably learn more by breaking it up and examining the core to see how well it colonized though.

Extras: Filter Print Post Top
Jump to top Pages: | 1 | 2 | 3 | 4 | 5 | 6 |  [ show all ]

Shop: Unfolding Nature Unfolding Nature: Being in the Implicate Order   Original Sensible Seeds Bulk Cannabis Seeds   Sporeworks.EU Spores for European Microscopy   MagicBag.co All-In-One Bags That Don't Suck   Mushroom-Hut Substrate Bags   North Spore Bulk Substrate   Myyco.com Golden Teacher Liquid Culture For Sale


Similar ThreadsPosterViewsRepliesLast post
* gallon jars done ellisdee625 2,832 12 05/16/02 06:19 PM
by erotomania
* Re: Any 1 have experience using 1 or 2 gallon jars to colonize? Mycelium5150 1,209 3 08/01/00 04:09 PM
by Mycelium5150
* new TEK, Growing all in the jar? Damn 5,008 18 09/26/02 10:04 PM
by AgentOrange
* Corncob Mycelium Slurry wat do u think?? miguel6911 1,122 2 01/29/03 06:00 AM
by diggitydankman
* PF CAKE SLURRIES?? KaliedoscopEyes 3,288 6 08/13/02 12:04 AM
by Roadkill
* Not fully colonized cakes in blender? Fd3000 3,656 9 07/10/02 08:02 AM
by Hammerloaf
* blender BADBOY2 1,833 11 10/08/01 01:15 AM
by BADBOY2
* Corn Cob Slurry!! Phenix 1,094 3 03/14/02 11:27 AM
by Seuss

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: DERRAYLD, Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
7,731 topic views. 6 members, 789 guests and 251 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.061 seconds spending 0.021 seconds on 18 queries.