Auto-SummaryThe post introduces a custom sterilizable bulk container called the CJAR (Colonized Juice Accumulation Reactor) designed for grain bulk inoculation in mushroom cultivation. The author, interested in creating such a device since 2008, describes the CJAR's features, including its ability to accommodate various substrates and maintain contam resistance post-100% colonization. The container is filled with a mixture of grains (rye, millet, brown rice, white rice) and vermiculite/perlite, with a slurry of colonized grain, malt, rice flour, soy flour, and coffee added for nutrient boost. The author emphasizes the importance of proper shaking to ensure even distribution of the slurry and successful colonization. After inoculation, the CJAR successfully colonized within 2-5 days at 65-69°F, with visible mycelium growth throughout. The author also discusses potential fruiting methods, such as casing from the top, and encourages feedback from experienced cultivators.
As the saying goes, if you want something done right...you do it yourself....so I made this, lol. Honestly I've been interested in creating a sterilizable bulk container since I started learning mush cultivation and have posts on the topic dating 2008. As usual, the idea was shot down here but if those people where smart enough to understand why someone would want to have such a thing....they would of designed and made it themselves, lol, guess thats where I come in. With this contraption named the CJAR, I can do grain in bulk quantities in one inoculation. As well, I can use any substrate that is usable, from wood to manure. The icing on the cake (no pun) is that once its 100% colonized, it will be contam resistant, just like pf cakes, so I should see a lower contam rate, as well, being that the mycelium has no friends living with it unlike regular pasteurized bulk.
 2qt Rye 2qt Millet 1qt Brown Rice 1qt White Rice 2.5qt Verm 1.5qt Verm/Perlite The grain proportions are whole, dry, quarts. My main focus was to concentrate as much nutrient into the CJAR aka "bomb" lol. I like the name bomb because no matter what goes inside this thing, its going to go off like a bomb, lol!, either I'll get a shit load of mushrooms or contams, either way, it will not be in small proportions! I pressure cooked it for 4 straight hours in as much water as I could fit into the pot without the cjar floating. I believe the water serves as a blanket for the glass so that once the cycle is up, any cold air that might get a chance to enter the pc will not be able to get to the thick of the jar causing it to crack. I let it cool, over night, inside the unopened pc. I also put the cjar in a pillow case so I could easily remove it from the pc.
 So the CJAR is 10 inches tall (10-11 inches wide), loaded dry, the substrate was 7 inches in depth. I didn't think that was overkill enough so I decided to use nutrient material in the slurry as well. First I figured the amount of water I wanted to add to achieve a percentage of moisture. I figured the numbers by weight of grain and 25% volume of vermiculite then I figured the numbers via volume of substrate and settled on a number. Osmosis probably wins so the number I chose, 3200ml, should give the sub ~40% moisture by volume.
 So I took a quart of colonized grain and "slurried" it in ~1950ml (1250ml was in the 2.5qt jar) of water with Malt, Brown rice flour, Soy flour, Maxwell bold coffee, all at ~200 grams each. Conveniently my slurry jar and the 2.5 quart jar both can fit in the pressure cooker , which I did so for about 45 minutes at 15 psi. I put slurry in quotations because upon running the slurry jar on the blender base I did not achieve any minced grain. Someone commented before that this would probably go this way because of the slurry jars volume. The mycelium was very well washed from the grain and mixed into the concoction. I blended for about 15 seconds on low and 15 on high, as well as another 15 seconds on high right before inoculating the cjar.
 The operation went smooth. I used a sterilized spoon to get the grain into the c-slurry jar, then set myself up to pour the two jars of liquid into the cjar, in front of the flow hood.

 The hardest part was shaking the damn thing. It weighs a lot! 10lbs of grain, 7lbs of water, and I forget how much the jar was by its self. First the coffee and flour settled to the bottom keeping the water from seeping into the grain. So I went with a twist, back n forth on the table top. The seal has to be water tight. I recommend testing your jar for leaks before using. The shake process also dirties the shit out of the filter. I have designed a filter that can last but I feel you should switch lid/filter assembly once the shaking process is done, I did. After enough twisting, I got aggressive with it and the silt floor gave way and the water finally drained into the grain/verm/perlite mix. Next I sat it in my lap on an angle and on rolled it back in forth on my legs. Talk about a work out! Towards the end of the process as there was not so much pooling water I turned the cjar completely on its side, on my lap, and rolled it back n forth with much force. I considered the shaking process done once there was practically no pooling water on the bottom. Once shaking was done I changed the lid/filter to a clean one. The verm collected some what, seems to not be a problem. The whole shaking ordeal lasted for the better half of a day. I would shake until my arms got tired, let it sit for 30-45 minutes then repeat, I feel like there where like 4-5 shaking sessions. Ultimately I just wanted no pooling water before I walked away
So I put it away and came back to it 2 days later to find it had recovered already! I was excited to see growth, not just because it was only 2 days later but because it was resting at 65-69 degrees the whole time which would slow things noticeably. Eatyualive brought slurry to the front stage and I must say that it works very well. I had a white glow of mycelium on everything in the cjar on day 2. These following pics are 4 days post inoculation, still at 65-69 degrees.
  Even the residual substrate on the lid has the white glow of spreading mycelium on it. There is not a piece of sub that is without mycelium growing on it. Slurry for the win on that one! These pics are 5 days post inoc. For a period, I have introduced warmer temps to the jar but as it gets close to 100% colonization I might be wise to keep it in a cooler place. I'm so happy to see growth like this at the bottom of the jar, the place with the least amount of GE. The growth is even stronger at the top so so far so good!
  How this thing will be fruited, granted it successfully colonizes, is not set in stone, I hope to hear from Violet and MudaFuka, or anyone else inclined, in regards to possibly casing it and fruiting it from the top. But if no one is interested in helping me, I made it this far...lol, I really would like to some how case the whole thing, like a giant cake, rolled in cvg allowing maximum fruiting surface. Pretty much the same advantage that a straw log has. With a prolific pinning isolate/clone imagine the crop from just one flush!!!!
Warning- If you have bad sterile technique, like say you can't successfully do LC for example do not I repeat do not attempt this project until you reach that level.
Edited by camplo (05/16/15 11:59 PM)
|