|
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
clearblue
newbie
Registered: 03/04/02
Posts: 27
|
Spore print to spore syringe- Easy Tek *DELETED*
#599489 - 04/05/02 10:04 AM (21 years, 10 months ago) |
|
|
Post deleted by clearblue
Edited by clearblue (04/05/02 10:14 AM)
|
SixTango
Mycota

Registered: 01/21/02
Posts: 1,996
Loc: A little North of Paradis...
|
Re: Spore print to spore syringe- Easy Tek [Re: clearblue]
#599673 - 04/05/02 01:39 PM (21 years, 10 months ago) |
|
|
For prints, I just take a 1/2 pint or pint jar w/plastic lid, w/small hole in lid & plastic (or stainless steel screw) inserted in hole in lid, fill with water, PC @ 15 lbs for 20 -- 30 minutes. In a glove box or in front of flow hood scape print into that jar. Take a wrap or two around the threads of the jar with alcohol swabbed white teflon pipe tread tape because after being PC'ed, plastic lids can dribble a little when shaken real hard. Screw on lid. Done deal. When I want a syringe, I just shake - shake - shake jar, (then -- in glove box or under flow hood) remove screw -- draw a syringe out, replace screw, store jar in fridge. Same goes for any dark syringes I get from others by purchase, swap or whatever. I just inject it in a 1/2 pint jar (as described above) that is already 3/4 full of sterile water. More bang for the buck -- shake & draw as needed. (Frugal) SixTango -- out
-------------------- ~whiskey river rafting, hot tubbing, dirty dancing & spending money on - wild women - having fun & just gonna waste the rest~
|
babyshroom
addict
Registered: 09/09/01
Posts: 456
Loc: Florida
Last seen: 19 years, 10 months
|
Re: Spore print to spore syringe- Easy Tek [Re: SixTango]
#599821 - 04/05/02 04:25 PM (21 years, 10 months ago) |
|
|
SixTango - I like your tek. I think I'll try it.
-------------------- I don't really know anyone who grows mushrooms. I just come here for fun.
|
Targa
newbie
Registered: 03/29/02
Posts: 41
|
Re: Spore print to spore syringe- Easy Tek [Re: clearblue]
#599891 - 04/05/02 05:48 PM (21 years, 10 months ago) |
|
|
Just read a Tek the other day that sounded like simplicity itself. Sterilize your jar and water, then make a "basket" out of two wires, so they cross like an X. Put the wires on top of your jar, drop your shroom cap on the wires, and let the spores go right into the water. He used 18 gauge plastic-coated wire. The wire dipped down inside the jar...like hook the wire over the rim, go down the side of the jar about 1/2 inch, then across the jar, up the other side, and hook the rim. (So it's like a basket down inside). Would need a glove box I imagine...
|
Alpheratus
member
Registered: 03/23/02
Posts: 171
Loc: neo berlin
Last seen: 17 years, 2 months
|
Re: Spore print to spore syringe- Easy Tek [Re: Targa]
#600782 - 04/06/02 06:33 PM (21 years, 10 months ago) |
|
|
you dont even need to use a wire basktet or whatever.... just make your print on teh bottom of your 1/2 pint sterile jar, add sterile water, shake, and your good to go... some people worry about contams on the mushroom so they wipe the bottom with peroxid, or alcahol. just skips a step, thats all.. hope that helps someone alpherat
-------------------- blasted holes into night until she bled sunshine
|
clearblue
newbie
Registered: 03/04/02
Posts: 27
|
Re: Spore print to spore syringe- Easy Tek *DELETED* [Re: Alpheratus]
#601253 - 04/07/02 10:14 AM (21 years, 10 months ago) |
|
|
Post deleted by clearblue
|
repobob
enthusiast
Registered: 12/18/01
Posts: 261
Loc: Illinois
|
Re: Spore print to spore syringe- Easy Tek [Re: clearblue]
#601258 - 04/07/02 10:29 AM (21 years, 10 months ago) |
|
|
Nice tek SixTango. The screw is siplicity itself, gotta try it. Targa, your wire idea sounds good. I think the idea here is to have as little basket as possible. If one uses scree, or a kitchen stopper you won't get as many spores. Whatever is used for a basket must allow the spores drop as freely as possible. Peace, Bob
-------------------- .
|
Targa
newbie
Registered: 03/29/02
Posts: 41
|
Re: Spore print to spore syringe- Easy Tek [Re: clearblue]
#602267 - 04/08/02 02:16 PM (21 years, 10 months ago) |
|
|
Here's the link for the "basket tek"...whaddya know, it was right here at the Shroomery! http://www.shroomery.org/9er/spores.html
|
|
|
You cannot start new topics / You cannot reply to topics HTML is disabled / BBCode is enabled
Moderator: Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, LogicaL Chaos, 13shrooms, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a 1,437 topic views. 39 members, 254 guests and 56 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ] |
|