Home | Community | Message Board


This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: MagicBag.co All-In-One Bags That Don't Suck   North Spore Bulk Substrate   Unfolding Nature Unfolding Nature: Being in the Implicate Order   Myyco.com Isolated Cubensis Liquid Culture For Sale   Mushroom-Hut Liquid Cultures   Sporeworks.EU Spores for European Microscopy   Original Sensible Seeds Autoflowering Cannabis Seeds

Jump to first unread post Pages: 1 | 2 | 3 |  [ show all ]
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
Answering questions on Ps. Mexicana * 1
    #3276043 -

I posted a picture in another thread and several people have been asking questions on growing Ps. Mexicana. Instead of taking someone elses thread Ill start a new one and answer anyones questions.

So here are a few pictures. :wink:










Extras: Filter Print Post Top
Re: Answering questions on Ps. Mexicana [Re: Cyber]
    #3276120 -

strain?
substrate?
casing?
cold shock?
how potent compared to cubensis?
any other strategy different to growing cubes?
experience on agar? (if yes please take a look at:
http://www.shroomery.org/forums/showflat.php/Cat/0/Number/3275936/an/0/page/0#3275936)


...and oh yeah, before forgetting, WOOOOW!!  :thumbup: :eek:


--------------------
we are reasonable people...

Edited by nimbus (10/25/04 05:23 PM)

Extras: Filter Print Post Top
Re: Answering questions on Ps. Mexicana [Re: nimbus]
    #3276167 -

Holy crap. I thought your other picture was good just in that there were fruits at all. This is fantastic, without even cold shocking.

How much did you case in each tray?

Extras: Filter Print Post Top
Re: Answering questions on Ps. Mexicana [Re: nimbus]
    #3276170 -

I think i have to order an print from Sporeworks  :grin:.

Did you get good prints? When the caps are very small you can gently put an waterdrop with an syringe on the cap, or yo put an wet cotton ball into the printing area.


--------------------
I love to grow exotics with spores from Sporeworks


Extras: Filter Print Post Top
Re: Answering questions on Ps. Mexicana [Re: Prankster239]
    #3276210 -

Where did you get your print Prankster? Not sure of many places that carry them other than sporeworks and that non-sponser place azarius (just heard about it the other minute in the other mexi a thread).


--------------------
You're not like the others. You like the same things I do. Wax paper, boiled football leather... dog breath. We're not hitch-hiking anymore, we're riding!

Extras: Filter Print Post Top
Re: Answering questions on Ps. Mexicana [Re: Koala Koolio]
    #3276292 -

Actually Azarius IS a sponsor!

Azarius


--------------------

Extras: Filter Print Post Top
Re: Answering questions on Ps. Mexicana [Re: MushroomFriend]
    #3276330 -

Ah. My mistake. hehe.

Extras: Filter Print Post Top
Re: Answering questions on Ps. Mexicana [Re: Koala Koolio]
    #3276368 -

:smile:


--------------------

Extras: Filter Print Post Top
Re: Answering questions on Ps. Mexicana [Re: MushroomFriend]
    #3276868 -

Quote:
strain?




Ps. Mexicana A-Strain

Quote:
substrate?




Rye grass seed.

Quote:
casing?




50% Coco-coir 50% vermiculite

Quote:
cold shock?




Nope

Quote:
how potent compared to cubensis?




No experience at this time.

Quote:
any other strategy different to growing cubes?




I did the same as my cubes. Same incubator, same fruiting chamber. Just takes longer.

Quote:
experience on agar?




Yes, lots of bad experience :wink: I have some Ps. Mexicana on agar in the fridge waiting for my next grow.

Quote:
How much did you case in each tray?




2 pints of colonized rye grass seed.

Quote:
Did you get good prints?




I have some printing right now. This is my first attempt at growing and printing Ps. Mexicana.

Oh and if you want to see pic's of my Cubes you can see them here

http://www.shroomery.org/forums/showflat.php/Cat/0/Number/3275868/an/0/page/0#3275868

Edited by Cyber (10/25/04 08:07 PM)

Extras: Filter Print Post Top
Re: Answering questions on Ps. Mexicana [Re: Cyber]
    #3278000 -

Quote:
Where did you get your print Prankster?




I onley have 1 isolate. But when i need an print my vendors of choice are Sporeworks and Mushmush.


--------------------
I love to grow exotics with spores from Sporeworks


Extras: Filter Print Post Top
Re: Answering questions on Ps. Mexicana [Re: Prankster239]
    #3278583 -

I have been trying to print some of them and not having much luck. They seem to dry out before I get a good print (8 to 10 hours they are dry to the touch). I have tried putting a drop or two of water on the cap but it has not helped. Does anyone have a suggestion as to how to get them to make good prints? I have some prints but they are light.

Extras: Filter Print Post Top
Re: Answering questions on Ps. Mexicana [Re: Cyber]
    #3278851 -

Maby it will work when you really put some wet cottonballs on an petri dish into the box you print. Then you can put the box at an wam place that the humitiy stay higher.


--------------------
I love to grow exotics with spores from Sporeworks


Edited by Prankster239 (10/27/04 06:40 AM)

Extras: Filter Print Post Top
Re: Answering questions on Ps. Mexicana [Re: Cyber]
    #3279034 -

Prints tend to get darker in later flushes. Good luck.


--------------------
Fiddlesticks.


Extras: Filter Print Post Top
Re: Answering questions on Ps. Mexicana [Re: Cyber]
    #3280135 -

Did you start from an isolate or a multispore? :thumbup: good job

Extras: Filter Print Post Top
Re: Answering questions on Ps. Mexicana [Re: BlueBruiser]
    #3280223 -

You know what? I didn't get a good answer on this from anyone, but I left the upside down jar(foil and cap on the bottom) on top of my air pump for 10 minutes to get a really nice print. Try that.

Sam


--------------------
Protect your civil rights!  End drug prohibition.  And if you don't care about your civil rights, protect mine!

If you want a rating from me, please PM me.  For those really newbies, don't expect an answer back, but you can try me anyways.

Extras: Filter Print Post Top
Re: Answering questions on Ps. Mexicana [Re: Cyber]
    #3280287 -

have you harvested yet? if so, what was your yeild?

Extras: Filter Print Post Top
Re: Answering questions on Ps. Mexicana [Re: justaname]
    #3280355 -

Hate to cross post, but my previous one in the grow log section is far less likely to get a response. So.. this seems more appropriate:

I'm getting ready to do this, but the only place I can find rye grass seed is the hardware store. They have small bags for like 7 bucks, and gigantic ones for 40. Whatever. Anyway my question was, as the only brand is "Scott's", does anyone know if it has fungicide or any other harmful material? It doesn't say so on the bag, but it definately doesn't say it doesn't, or all natural or anything. Any help?

Extras: Filter Print Post Top
Re: Answering questions on Ps. Mexicana [Re: Koala Koolio]
    #3280514 -

I'm pretty sure it has to say if there is. Sounds a bit pricey though... well, it is the off season. Not many planting lawns right now.


--------------------
Fiddlesticks.


Extras: Filter Print Post Top
Re: Answering questions on Ps. Mexicana [Re: Koala Koolio]
    #3281635 -

elgr said:
I'm getting ready to do this, but the only place I can find rye grass seed is the hardware store. They have small bags for like 7 bucks, and gigantic ones for 40. Whatever. Anyway my question was, as the only brand is "Scott's", does anyone know if it has fungicide or any other harmful material? It doesn't say so on the bag, but it definately doesn't say it doesn't, or all natural or anything. Any help?



I used Scotts Turf Builder Perennial Rye Grass Seed from Home Depot. It was about 7$ for the 3lb bag and I used less that 1/3 of the bag making 6 jars. So it should work fine.

Extras: Filter Print Post Top
Re: Answering questions on Ps. Mexicana [Re: justaname]
    #3281655 -

justaname said:
have you harvested yet? if so, what was your yeild?



I have just started picking them. around 15 so far (For printing) and they amount to about .4g for the 15 (Dry weight) They are vary small!

To give you an idea of there size, This is a 12cc syringe on the casing


Extras: Filter Print Post Top
Jump to top Pages: 1 | 2 | 3 |  [ show all ]

Shop: MagicBag.co All-In-One Bags That Don't Suck   North Spore Bulk Substrate   Unfolding Nature Unfolding Nature: Being in the Implicate Order   Myyco.com Isolated Cubensis Liquid Culture For Sale   Mushroom-Hut Liquid Cultures   Sporeworks.EU Spores for European Microscopy   Original Sensible Seeds Autoflowering Cannabis Seeds


Similar ThreadsPosterViewsRepliesLast post
* P.Mexicana PINKMIST 799 1 03/26/03 02:33 PM
by PINKMIST
* Re: P. Mexicana
( 1 2 all )
Anonymous 5,165 31 01/31/00 10:25 AM
by Condi1
* Re: P. Mexicana TheMilkMan 604 1 08/04/00 09:58 AM
by psilocyber
* Stupid Question about spore prints shroom_assassin 1,524 6 07/15/02 03:07 PM
by Boppity604
* Question regarding spore print Shtoops 601 1 10/30/02 12:35 PM
by StS
* question about making prints megaman3 525 4 01/06/03 01:17 PM
by angryshroom
* question about spore prints RICHSPROACHING 481 1 06/05/01 12:06 AM
by lounge lizard
* where to get mexicana "A" fleshofgods 1,845 14 01/21/04 12:44 PM
by psilocyber

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
6,240 topic views. 10 members, 2,434 guests and 185 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.04 seconds spending 0.016 seconds on 17 queries.