Home | Community | Message Board


This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: North Spore Bulk Substrate   Sporeworks.EU Spores for European Microscopy   Original Sensible Seeds Bulk Cannabis Seeds   Mushroom-Hut Substrate Mix   MagicBag.co All-In-One Bags That Don't Suck

Jump to first unread post Pages: 1
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
Got new lights, still skinny shrooms.
    #11378421 -

So I think I may have pinpointed (no pun intended) why my pins have been malnourished lately, forming into tall skinny mushrooms that abort before they even grow an inch.

I just found out that the fluorescent bulbs I was using were 7100k.  And I recently discovered that what I want is 3500k.  Could this be my issue?

Also, most fluorescent lights have a protective casing over the light, does this affect the color temp in anyway or hinder it?

Thank you.

-eZ


--------------------
Proud to be a member of the Feel Family.

My Logs:
BRF Trial 1
First Mono Tub
Quadruple Mono Tub Grow
My Last Tub

Edited by ezwider (11/06/09 05:23 PM)

Extras: Filter Print Post Top
Re: Question about fluorescent color temps. [Re: ezwider]
    #11378517 -

you want full spectrum lighting (6500k)

get a full spectrum cfl and enjoy proper lighting and the knowledge that your impact on the environment has lessened.


--------------------

Edited by Citizen13 (11/03/09 07:09 PM)

Extras: Filter Print Post Top
Re: Question about fluorescent color temps. [Re: Citizen13]
    #11378566 -

cfl?  where can I get these?  any alternatives to walmart?  I need to do this asap, 2 tubs are at risk.


--------------------
Proud to be a member of the Feel Family.

My Logs:
BRF Trial 1
First Mono Tub
Quadruple Mono Tub Grow
My Last Tub

Extras: Filter Print Post Top
Re: Question about fluorescent color temps. [Re: ezwider]
    #11378605 -

home depot, online, or just open a curtain if that's an option.

cfl's are just energy saving bulbs, you can use any kind of bulb.


--------------------

Extras: Filter Print Post Top
Re: Question about fluorescent color temps. [Re: ezwider]
    #11378613 -

Are you pretty sure you are getting enough FAE? and I think that the higher kelvin on the scale is better, 6500 being close to correct. Your flourescent grow lights will be around the 7100k range. Usually the kelvin is listed somewhere on the box and any place with a large selection should have what you want.
Just be sure that you have enough FAE and that your sub isn't too dry.
:thumbup:


--------------------
"Freedom is something that dies unless it's used." H.T.
I've come to believe that the heart is the filter of the enlightened mind. Epilson Lyrae

Extras: Filter Print Post Top
Re: Question about fluorescent color temps. [Re: Epilson Lyrae]
    #11378727 -

these are the lights i use
and i love them



  -noobie-


--------------------
AMU

Best Thread Ever
CapZilla said:
not sure what GE and FAE are but i should probably get some.

Citric said:
Your signature is wrong on colonization temps!

GOOD JUDGMENT COMES FROM EXPERIENCE
EXPERIENCE COMES FROM BAD JUDGMENT

ROOM TEMP 70-75 IS BEST FOR COLONIZATION
Thank you mycochef

Extras: Filter Print Post Top
Re: Question about fluorescent color temps. [Re: ezwider]
    #11378784 -

ezwider said:
I just found out that the fluorescent bulbs I was using were 7100k.  And I recently discovered that what I want is 3500k.  Could this be my issue?




You don't want 3500 Kelvin. You want 5000 to 7000 Kelvin fluorescent natural or 'daylight' tubes. You're probably OK with 7100.

Make sure you give them enough FAE and misting.


--------------------
Gypsum/Drywall Tek
The Story Of Russell The Texas (Cube) Bear



The human race's prospects of survival were considerably better when we were defenceless against tigers than they are today when we have become defenceless against ourselves.
-Arnold J. Toynbee

Extras: Filter Print Post Top
Re: Question about fluorescent color temps. [Re: nexus1946]
    #11378929 -

When I take the polyfil out my sub drys, and when I leave it in it doesnt get enough fae.  I have the polyfil in LOOSE and a fan running at all times.  I just dont get it.


--------------------
Proud to be a member of the Feel Family.

My Logs:
BRF Trial 1
First Mono Tub
Quadruple Mono Tub Grow
My Last Tub

Extras: Filter Print Post Top
Re: Question about fluorescent color temps. [Re: ezwider]
    #11378979 -

If you have the option and are able to do it, take the top off and use it to gently fan your tub several times a day. This gives you a more complete air exchange without drying it out real bad. Just do it gently and not like a hurricane. The idea is to change the air out by volume and not by force. Do this up to 4-5 times a day. briefly and gently. Then just keep an eye on your moisture content and if you feel that it is drying out, you can mist a little bit.
I hope this helps and it may not be the right answer for you but I feel that it is good advice. I wish you the best bro. It really is an art to finding what works best for you.


--------------------
"Freedom is something that dies unless it's used." H.T.
I've come to believe that the heart is the filter of the enlightened mind. Epilson Lyrae

Extras: Filter Print Post Top
Re: Question about fluorescent color temps. [Re: Epilson Lyrae]
    #11379026 -

It just sucks because my other tubs flourished.  Thanks for the info.

Another thing, while colonizing, I notice water builds up and drips down to the bottom underneathe of the trash bag, do I want to drain this and pour it out or just leave it for humidity help?


--------------------
Proud to be a member of the Feel Family.

My Logs:
BRF Trial 1
First Mono Tub
Quadruple Mono Tub Grow
My Last Tub

Extras: Filter Print Post Top
Re: Question about fluorescent color temps. [Re: ezwider]
    #11379082 -

That light is fine. You are trying to replicate the sun as much as possible. 7100k isn't far from that.

6000-7000 is what you want to shoot for. CFL lights are fine.


--------------------
Do not deny the classical approach, simply as a reaction, or you will have created another pattern and trapped yourself there.

How I get my Pinsets
The Capabilities Of A Shotgun FC

Extras: Filter Print Post Top
Re: Question about fluorescent color temps. [Re: ezwider]
    #11379097 -

That I don't know. I have taken to drilling a small hole in the bottom of my mono's so that when I soak I can allow for a little more drainage and then when it's done all the water runs out. But to your question...:shrug: I'm not sure.


--------------------
"Freedom is something that dies unless it's used." H.T.
I've come to believe that the heart is the filter of the enlightened mind. Epilson Lyrae

Extras: Filter Print Post Top
Re: Question about fluorescent color temps. [Re: Epilson Lyrae]
    #11382262 -

Yeah I just introduced a new tub to frutiing conditions, going to leave the polyfil out for one day just because there is so much moisture on the walls, the substrate, and a pool of water under the trash bag.  Maybe I'll start another thread about water buildup when I get home from work.

I set my tubs my my window for now, I dont trust the lights yet.

How do I know if its CFL?  This is what my closet set up looked like.



Also I asked earlier, my lights have a protective casing covering the bulbs, does this hinder or affect the color temp in anyways?  Like does my 7100k light with the added protective case bring it down to like 3000k or something?  The protective casing is ridged and opaque so that the lights arent as bright. Im thinking I should take them off.


--------------------
Proud to be a member of the Feel Family.

My Logs:
BRF Trial 1
First Mono Tub
Quadruple Mono Tub Grow
My Last Tub

Extras: Filter Print Post Top
Re: Question about fluorescent color temps. [Re: ezwider]
    #11382359 -

like i said, you don't need cfl bulbs, you can use any kind of bulb. but if you want a cfl bulb (energy efficient) they are the ones that are spiral shaped.

-and 7100k is more than fine, just use that.

one thing that you may regret is not using trashbags on the bottom. those tubs may look opaque, but they arent. i once had a tub like that pin on all sides to my dismay. thousands of tiny tiny shrooms growing all along the sides and bottom.


--------------------

Extras: Filter Print Post Top
Re: Question about fluorescent color temps. [Re: Citizen13]
    #11382676 -

-your light is fine, that's not what's causing your problem.

-keep the polyfill in tight and simply fan with the lid a few times a day like someone else described.  Besides that just stop thinking about it so much and allow the mycelium to do its thing.  If it's already too dry after several weeks you should give it a dunk.

-yes, you can pour out that excess water whenever you feel like it.

-no, the plastic cover will not effect the light output or color temp.


Citizen13 said:
one thing that you may regret is not using trashbags on the bottom. those tubs may look opaque, but they arent.



he does have a bag in there and side pinning is not caused by light anyway.

Extras: Filter Print Post Top
Re: Question about fluorescent color temps. [Re: tall dwarf]
    #11383144 -

tall dwarf said:
-your light is fine, that's not what's causing your problem.

-keep the polyfill in tight and simply fan with the lid a few times a day like someone else described.  Besides that just stop thinking about it so much and allow the mycelium to do its thing.  If it's already too dry after several weeks you should give it a dunk.

-yes, you can pour out that excess water whenever you feel like it.

-no, the plastic cover will not effect the light output or color temp.


Citizen13 said:
one thing that you may regret is not using trashbags on the bottom. those tubs may look opaque, but they arent.



he does have a bag in there and side pinning is not caused by light anyway.



-in his quadruple monotub signature post he says he's not using bags. if that isnt this grow then my bad :laugh:

-what's it caused by? this sure is news to me!


--------------------

Extras: Filter Print Post Top
Re: Question about fluorescent color temps. [Re: Citizen13]
    #11383531 -

Side pinning is caused mostly because that is the perfect environment for the things to grow. The RH is good there and it makes them want to grow there. Light is a factor though to some degree but it's mostly the RH I believe. I could be wrong though.


--------------------
"Freedom is something that dies unless it's used." H.T.
I've come to believe that the heart is the filter of the enlightened mind. Epilson Lyrae

Extras: Filter Print Post Top
Re: Question about fluorescent color temps. [Re: Epilson Lyrae]
    #11384283 -

gngsteroflove said:
Side pinning is caused mostly because that is the perfect environment for the things to grow. The RH is good there and it makes them want to grow there. Light is a factor though to some degree but it's mostly the RH I believe. I could be wrong though.



the RH on the sides of your substrate that contact the walls would be 100% at any given time no matter what you used, bag or not.

i'm pretty sure it's caused by light. i'd say im positive but i've been out of the game for a while so maybe something changed while i was away.


--------------------

Extras: Filter Print Post Top
Re: Question about fluorescent color temps. [Re: Citizen13]
    #11398916 -

Just got some f20 daylight flourescents at 6500k, they are SOOOOOOO much brighter and whiter than the other bulbs I had, definately a huge difference.  I'll let everyone know whats up.

For now, here are some pics.

Here is the 27qt tub of B +


Here is the 50qt tub of Blue Meanie I just introduced to fruiting conditions the other day, lots of moisture so I left the polyfil out for a bit.


Here are 2 close ups of the B+ bin, you can see how small and skinny these fuckers are.



--------------------
Proud to be a member of the Feel Family.

My Logs:
BRF Trial 1
First Mono Tub
Quadruple Mono Tub Grow
My Last Tub

Extras: Filter Print Post Top
Jump to top Pages: 1

Shop: North Spore Bulk Substrate   Sporeworks.EU Spores for European Microscopy   Original Sensible Seeds Bulk Cannabis Seeds   Mushroom-Hut Substrate Mix   MagicBag.co All-In-One Bags That Don't Suck


Similar ThreadsPosterViewsRepliesLast post
* Re: Plant light for shrooms? LinkA 1,598 11 02/14/00 06:24 PM
by PanTrop
* skinny shrooms Zmann 1,046 1 10/17/01 01:10 PM
by BeppoMarx
* Some lighting questions! rain_angel 1,567 9 05/17/02 11:08 PM
by evilchurch_doc
* Was it the Light? babyshroom 936 6 10/10/01 08:19 AM
by babyshroom
* Re: light....fluorescent or regular light bulb? Hippie3 1,616 4 04/16/00 03:36 AM
by PanTrop
* Re: Light Question/Thought JDPhish 1,087 6 06/05/00 10:34 AM
by Anonymous
* fat ass shroom question yogithehoneybear 2,217 3 03/15/02 11:11 AM
by Hippie3
* how much light? gaastra 1,281 7 10/28/01 02:22 PM
by MAIA

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: DERRAYLD, Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
1,948 topic views. 6 members, 581 guests and 117 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.03 seconds spending 0.008 seconds on 14 queries.