Home | Community | Message Board


This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: Original Sensible Seeds Bulk Cannabis Seeds   North Spore Bulk Substrate, North Spore Mushroom Grow Kits & Cultivation Supplies   Sporeworks.EU Spores for European Microscopy

Jump to first unread post Pages: 1
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
Grow Room and Lab Design Considerations
    #9234438 -

Hi everyone! I quit shrooming for a while, but I have had so many requests from friends and family to start doing it again that I'm going to bite the bullet. I've been reading Stamet's books. The plan is to build a grow room and a separate lab, and I'm starting to draw up plans so I am looking for you guys to steer me in the right direction, so please let me know how this all sounds

The two rooms will be in the basement, made from 6 mil black & white poly stapled to the ceiling, with zippers for doors and sealed fluoro's for lighting. A 12x12 HEPA and small blower with prefilter will take air from the basement and pressurize the lab. The lab will have a duct to the grow room, and the grow room will have a duct to the outside. This will create positive pressure in both rooms so that small leaks around the staples and zippers wont be a problem. There will be an antechamber before the lab entry, and a door between the lab and the grow room. Bags and jars will be incubated in a partition of the lab.

For the lab I need a big, tall, non-organic table, any recommendations for what to use? I'm going to build a nice laminar flow hood, or just buy the Series 1 from FungiPerfecti, but something a little taller like 18x24 or 24x24 might be nice. If I go with the DIY should I get the HEPA from FP or somewhere else? And what is the advantage of having the walls and a clear top that extend downward from the flow hood, around the work area? Should I build it with these?

The other concern in the lab is this: I currently have a 1941X and I don't really want to go all out and buy a 75X (around a $1000 total would be nice) but I want to keep the sterilizer in the lab full time (my kitchen is really dirty.) Trying to heat the 1941X on a hot plate is very time consuming, so what are my options? Does someone make a very large hot plate? I could get a propane burner, but that might be dangerous; I'm not going to sit in the lab for 4 hours and watch it. Otherwise, maybe I should just break down and buy a 75X. Would it be safe to run that on a (high capacity) digital appliance timer? Am I going in the wrong direction here?

For the grow room I'm thinking a martha or two, not much else, although I've been using monotubs for so long I may do that for a while. One concern is that contaminants might work their way down the duct from the outside and into the grow room. Is that a possibilty? Anything else?

Extras: Filter Print Post Top
Re: Grow Room and Lab Design Considerations [Re: WhAcKeD]
    #9234495 -

I have a house single story two bedroom I have to live in one so I have a grow room and kitchen I honestly use the kitchen for a lab and everything is cool


--------------------
Mushrooms are a funny drug!!!!!!!!!!!!!

Extras: Filter Print Post Top
Re: Grow Room and Lab Design Considerations [Re: aaronemerritt]
    #9235703 -

My current clean area is draped in B-W Poly ( Panda Paper to our European kith) with single zipper door.

The zipper is ok but next time I’m going for an overlap / flap door. 1x3 frame and velcro. Maybe pvc tube.

Would suggest looking into negative ion and ozone generators for general atmospheric cleanliness.

If you build hood, FP really does have the best filter AFAIK. A plexi shield is nice but far from necessary. Good for doing extra clean work or having a cup of coffee with.

A single commercial 220 volt burner would work for your PC. Hot plate won’t cut it. Would think condensation maybe on the plastic walls. Easy enough to put a vent  together for use while cooking.

You don’t really walk too far away from a pressurized pot, do you?


--------------------

Extras: Filter Print Post Top
Re: Grow Room and Lab Design Considerations [Re: JaComet]
    #9241322 -

Sometimes I go to sleep and just turn the sterilizer off in the morning, lol, but I probably shouldn't do that. Where do I find that kind of 220v burner? And why would you not want to use the zipper? For my positve pressure design I need a way to keep that flap shut. I live with the 3 little pigs, btw, so using the kitchen is hardly an option.

Extras: Filter Print Post Top
Re: Grow Room and Lab Design Considerations [Re: WhAcKeD]
    #9242544 -

WhAcKeD said:
Sometimes I go to sleep and just turn the sterilizer off in the morning, lol, * * *



OhhKaaee.

The single vertical zipper door is something of a hassle for this old man to get through with arms full of 941. Mine is floor to ceiling, forming a corner. It might work different in a flat panel.

The door, or hatch, I’m sketching is a flap style, rather than flush, has felt seals and maybe no more than two velcro buttons for latches.  Should be fairly tight.

A suitable hot plate might be found at a restaurant supply or be DIY’ed from a junk range or repair parts. I don’t know if a 110 volt table top grill would suffice. The best home type hot plates could not handle my smaller 925.

Man, a proper two burner plate, built into the main bench would be muy bonito.


--------------------

Extras: Filter Print Post Top
Jump to top Pages: 1

Shop: Original Sensible Seeds Bulk Cannabis Seeds   North Spore Bulk Substrate, North Spore Mushroom Grow Kits & Cultivation Supplies   Sporeworks.EU Spores for European Microscopy


Similar ThreadsPosterViewsRepliesLast post
* Grow Room Design Help T66 1,178 2 10/29/01 03:21 PM
by crispyburrito
* Complete Professional Growing Tek
( 1 2 3 all )
bluhoney 24,321 43 04/15/24 05:10 PM
by stasis
* FungiPerfecti spawn bags - anyone use? Mordor 2,482 6 06/30/01 11:44 AM
by Una
* Which is easier to grow? Weed or Shrooms? Vandenberg 6,325 8 01/30/02 11:12 PM
by SThomas
* which is easier to grow (IYO), bud or shrooms?
( 1 2 all )
Snobrdr311 5,786 31 11/28/01 08:03 PM
by Jammer
* Grow Room Ideas lizzardking 2,067 9 05/28/01 11:24 PM
by TheMadRussian
* My first attempt at growing mushrooms... PirogiKing 1,089 1 07/30/02 12:26 PM
by Mr_Puke
* huge grow area fredhedd 1,142 3 08/07/01 01:34 PM
by Billyblastoff

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: DERRAYLD, Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
2,857 topic views. 12 members, 727 guests and 331 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.027 seconds spending 0.01 seconds on 16 queries.