Home | Community | Message Board

Cannabis Seeds Zamnesia
This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Unfolding Nature Shop: Unfolding Nature: Being in the Implicate Order

Jump to first unread post Pages: 1
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
Laminar Flow Hood SOS
    #6506343 -

I purchased a laminar flow hood on ebay, and I think they screwed the whole thing up… but I’m not sure. Please help!!!

Basically, they advertised the following:

“It has been hand made from quality 3/4" 7-ply Birch with a 12"x24"x6" scanned 99.99% HEPA filter. Comes with a brand new Active Air 465cfm blower complete with power cord and instructions.”

But when I got the flow hood (which was made pretty poorly), the air blower was packaged separately with no indication of what speed it was other than this crumpled up piece of paper that said: “ActiveAir 600CFM & 800 CFM Blowers.” The paper did indicate that the 800CFM blower had an outer mouth measurement of 71/4” by 6”, which matches the size of my blower (and is larger than the specs for the 600CFM). So now I’m wondering if they sent me the wrong one. Either way, the paper doesn't’t even mention the 465CFM I was supposed to get.

The only thing the blower has written on it is this:

Hydrofarm Inc.
1/20 HP, 1 PH, 120 V, 60 HZ, 2.2 A, ROT. CCW,
1550 R.P.M., T.P. INS. CL. “B”
P/N : FN465SYS MOD. J483-4A-372/4

I did notice the P/N had the number 465 in it, but I’m still not sure if I received the correct blower.

I just need to know what blower I have, and equally as important, what blower I need for the given filter to work properly.

Any help would be greatly, GREATLY appreciated!!!


--------------------
"Something else I'm getting tired of in this country is all this stupid talk I have to listen to about children. That's all you hear about anymore, children: 'Help the children, save the children, protect the children.' You know what I say? Fuck the children!"

-George Carlin

Extras: Filter Print Post Top
Re: Laminar Flow Hood SOS [Re: ShroomGoddess]
    #6506567 -

Pleeezzz help me!


--------------------
"Something else I'm getting tired of in this country is all this stupid talk I have to listen to about children. That's all you hear about anymore, children: 'Help the children, save the children, protect the children.' You know what I say? Fuck the children!"

-George Carlin

Extras: Filter Print Post Top
Re: Laminar Flow Hood SOS [Re: ShroomGoddess]
    #6506628 -

Why aren't you asking the person who sold it to you.
They should be able to answer you.

What are the spec's on the filter?
One has to have spec's on both filter & blower, to determine compatibility.


--------------------

Extras: Filter Print Post Top
Re: Laminar Flow Hood SOS [Re: ShroomGoddess]
    #6506653 -

Put it together and see how it works. If it moves the air it's gotta be good. You'll prolly hear the motor wine if it's stressed.

Sounds like they just put the wrong print-out in your package. If thats the case then the filter should be compatible. Unless they really fucked up.
Logic indicates that the motor is the 465. The higher output ones prolly run at a higher RPM. And like you said the model number is a dead give away.

Extras: Filter Print Post Top
Re: Laminar Flow Hood SOS [Re: agar]
    #6506670 -

Hey agar.

Well, long story short- the guy whole sold me this thing took my money order and bailed on his company. According to his sister (whose ebay account it is), she had to fill all the orders placed to his "company" as best she could. Hell, it may have been her that made the flow hood.

Unfortunately, what I wrote is all I know. I've written her numerous times, and she's totally clueless.

But... I did read that when a flow hood is in use, a bic lighter flame should bend at a 40-80% angle. Now, my best bud is an electrician of sorts, and he has made me a switch that will allow me to control the amount of power the blower receives (he used a dimmer switch and a couple other things). So, if I adjust the blower to the point the flame is at the correct angle, would that possibly work?

I just don't know what else to do...


--------------------
"Something else I'm getting tired of in this country is all this stupid talk I have to listen to about children. That's all you hear about anymore, children: 'Help the children, save the children, protect the children.' You know what I say? Fuck the children!"

-George Carlin

Extras: Filter Print Post Top
Re: Laminar Flow Hood SOS [Re: MajorDick]
    #6506682 -

Thanks for the response MajorDick!

Good to know the RPM's seem in the right ballpark. And I think you're correct, if the air flows well, it's probably a good sign!


--------------------
"Something else I'm getting tired of in this country is all this stupid talk I have to listen to about children. That's all you hear about anymore, children: 'Help the children, save the children, protect the children.' You know what I say? Fuck the children!"

-George Carlin

Extras: Filter Print Post Top
Re: Laminar Flow Hood SOS [Re: ShroomGoddess]
    #6506695 -

I don't like the sound of that eBay shit. You may wanna check up on the filter itself.. To make sure it is what they say it is. Thats the most expensive part so thats where they'd get ya.

Extras: Filter Print Post Top
Re: Laminar Flow Hood SOS [Re: ShroomGoddess]
    #6506699 -

At this stage you need to put it together and see what you got.

Thats a bum ebay deal.

Good luck. 


:sun:


--------------------
Child of the 60's, Tripping ever since.


:sun:

Extras: Filter Print Post Top
Re: Laminar Flow Hood SOS [Re: KaptKid]
    #6506725 -

I'll check the filter out as best I can.

And yeah, I'm definitely a little soured on ebay. I missed out on a bid for a used flow hood some guy had purchased from a reputable Shroomery dealer, but I thought this one would be just as good seeing as how this dude technically had a company of his own. Wow, what a mistake. I saved a little over $100, but I guess you really do get what you pay for...

Let this be a lesson to all- Shroomery sponsors or bust!


--------------------
"Something else I'm getting tired of in this country is all this stupid talk I have to listen to about children. That's all you hear about anymore, children: 'Help the children, save the children, protect the children.' You know what I say? Fuck the children!"

-George Carlin

Extras: Filter Print Post Top
Re: Laminar Flow Hood SOS [Re: ShroomGoddess]
    #6507129 -

Your electrician friend should know better than to hook a dimmer switch to a motor. Not only is it a violation of the electrical codes, but a fire hazard too. Motor speed with AC motors is determined by the frequency, which is 60 Hz in the US. Lighting dimmers work by limiting the current the light bulb receives. They are not compatible.

You control motor speed with a motor speed controller. They're built different, but not much more expensive. However, you'll want that 1/20 horsepower motor running full speed anyway so just wire it to the cord direct.

The 465 cfm figure is almost certainly based on zero static pressure. I have a 12 X 24 flow hood and it uses a 1/15 hp motor. Hopefully, you'll have enough flow, but definitely won't have too much.
RR


--------------------
Download Let's Grow Mushrooms



semper in excretia sumus solim profundum variat

"I've never had a failed experiment.  I've only discovered 10,000 methods which do not work."
Thomas Edison

Extras: Filter Print Post Top
Re: Laminar Flow Hood SOS [Re: ShroomGoddess]
    #6507414 -


A candle will tell you if it pushes adequate air through the filter.
If it can bend the flame over, it's okay.
If not, it's bunko.
If it blows a candle out, wired direct.
Then, you will need a speed control, to slow it down.
As RR points out,
do not use a rheostat, in place of a motor speed control.


--------------------

Extras: Filter Print Post Top
Re: Laminar Flow Hood SOS [Re: ShroomGoddess]
    #6507614 -

Quote:
my best bud is an electrician of sorts



of sorts?

that sounds pretty scary hun.

I hope that you have fire insurance!~


Listen to RR...

he knows what he is saying when it comes to Electrical work.

believe me!~



tc


--------------------
Laterz, Road

Who the hell you callin crazy?
You wouldn't know what crazy was if Charles Manson was eating froot loops on your front porch!


Brainiac said:
PM the names with on there names, that means they have mushrooms for sale.


Extras: Filter Print Post Top
Re: Laminar Flow Hood SOS [Re: ShroomGoddess]
    #6838122 -
Log in to view attachment

I realize this thread is a bit old, but I just received the performance charts for that fan. Here's to hoping it provides useful to someone in the future if you already have all your answers. See zip file attached to post.


--------------------
A child's rhyme stuck in my head.
It said that life is but a dream.
I've spent so many years in question
to find I've known this all along.

The truth is in between the 1st and 40th drink.

Extras: Filter Print Post Top
Re: Laminar Flow Hood SOS [Re: Silllo]
    #6838166 -

I look at one on ebay and passed on it.I got one from Fungi Perfecti.How much did you get youres for ?


--------------------
:Awesketch:

:cool: Fair is Fair :devil:

Extras: Filter Print Post Top
Re: Laminar Flow Hood SOS [Re: Brainiac]
    #6838184 -

$80 shipped


--------------------
A child's rhyme stuck in my head.
It said that life is but a dream.
I've spent so many years in question
to find I've known this all along.

The truth is in between the 1st and 40th drink.

Extras: Filter Print Post Top
Re: Laminar Flow Hood SOS [Re: Silllo]
    #6838193 -

$1060 plus S&H



--------------------
:Awesketch:

:cool: Fair is Fair :devil:

Edited by Brainiac (04/26/07 08:57 PM)

Extras: Filter Print Post Top
Re: Laminar Flow Hood SOS [Re: Brainiac]
    #6838287 -

Brainiac said:
$1060 plus S&H





Wish I could afford that :burnbabyburn:

Extras: Filter Print Post Top
Re: Laminar Flow Hood SOS [Re: chainsaw1298]
    #6838311 -

I won some money


--------------------
:Awesketch:

:cool: Fair is Fair :devil:

Extras: Filter Print Post Top
Re: Laminar Flow Hood SOS [Re: Brainiac]
    #6838967 -

you could have built it for half as much.


--------------------
A child's rhyme stuck in my head.
It said that life is but a dream.
I've spent so many years in question
to find I've known this all along.

The truth is in between the 1st and 40th drink.

Extras: Filter Print Post Top
Re: Laminar Flow Hood SOS [Re: Silllo]
    #6839481 -

I know, I could have. But, I dont have the tools,space or physical body sheath to build one.(almost in a wheelchair)I do have alot of money.:grin: The upside, when you get something from the master, its going to work.

Edited by Brainiac (04/27/07 02:43 AM)

Extras: Filter Print Post Top
Jump to top Pages: 1

Unfolding Nature Shop: Unfolding Nature: Being in the Implicate Order


Similar ThreadsPosterViewsRepliesLast post
* Re: simple question about laminar flow hoods Anonymous 778 2 04/15/00 01:07 PM
by Anonymous
* laminar air flow hood question yogithehoneybear 2,156 2 01/27/02 08:20 AM
by mycofile
* Hepa type filter - flow hood - cheap & easy
( 1 2 all )
SixTango 17,633 25 04/09/02 01:14 PM
by rebelmoon
* Oven Hood to flow hood conversion? G a n j a 2,404 3 01/13/03 06:23 AM
by debianlinux
* flow hoods and blower motors quietnick 1,726 3 07/15/02 01:59 PM
by groingrinder
* sharper image ionic breeze ? convertable flow hood kzlazy 1,146 2 04/20/02 01:05 AM
by kzlazy
* flow hood ast 746 2 07/22/02 08:12 AM
by bluefoot
* Hepa Air Purifier Flow Hood? tenaciousC 2,822 1 04/20/02 08:51 PM
by Baccus

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: DERRAYLD, Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
6,453 topic views. 10 members, 512 guests and 162 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.03 seconds spending 0.006 seconds on 16 queries.