Home | Community | Message Board


Kratom Eye
Please support our sponsors.

Mushrooms, Mycology and Psychedelics >> Mushroom Cultivation

Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Jump to first unread post. Pages: 1
Offline95rh
Stranger
Registered: 05/03/03
Posts: 115
Last seen: 14 years, 21 days
Still Air Glovebox project
    #2187261 - 12/18/03 07:49 AM (14 years, 4 months ago)


ok, so after much delay and no little bit of research I finally came up with an inexpensive glovebox that I believe will work exceptionally well.

After reading all the debate over positive pressure glove boxes it seemed to me that keeping it simple would increase my chances of success. so here's what I came up with.



The idea is that the flange on the 4" pvc will help hold it in plae while the "bonder" cement on the inside will keep it airtight. I used a rotozip to cut the holes, works very well The gloves are just strecthed over the pvc so they can be easily removed/replaced when the time comes.




The orange gloves shown were to short to be useful so I did some searching and found a case of real rubber gloves with cotton inserts 15" long ideal for this kind of work. See my post here for more info on the gloves.


http://www.shroomery.org/forums/showflat...rt=1&PHPSESSID=



And so after 30 mins of cutting and 24 hrs of glue drying time it's ready to go.


Post Extras: Print Post  Remind Me! Notify Moderator
OfflineMarkostheGnostic
Elder
Male User Gallery

Registered: 12/10/99
Posts: 13,349
Loc: South Florida Flag
Last seen: 8 hours, 10 minutes
Re: Still Air Glovebox project [Re: 95rh]
    #2192613 - 12/20/03 11:28 AM (14 years, 4 months ago)

Ya know, unless your have really large arms, plastic, collapsable, inexpensive, clothes-drier vent hose can be used to extend your rubber gloves into glove box arms. You can duct-tape gloves onto 1/2 a coffee can (edges taped) and the drier hose to the other side of the coffee cans, and the hoses can be fixed to yet two other 1/2 coffee cans mounted to the box with large hose clamps. A 3/4" board can have arm-holes cut out, the coffee cans can then be fitted firmly into the cut-outs and fastened with brads/small tacks for strength. Just an idea (that works).


--------------------
γνῶθι σαὐτόν - Gnothi Seauton - Know Thyself


Post Extras: Print Post  Remind Me! Notify Moderator
InvisibleHanky
wiffle bat.
Male User Gallery
Registered: 08/30/03
Posts: 56,993
Loc: Great Southern Land.
Re: Still Air Glovebox project [Re: 95rh]
    #2192626 - 12/20/03 11:36 AM (14 years, 4 months ago)

you'll also find it much easier to work if your arm holes are spaced much further apart,this provides a more natural,less spastic working posture.having your hands/forearms so close together is going to make you feel like a seal.


--------------------
Coaster is an idiot...
[quote]Coaster said:
but i thnk everything thats pure is white?
[/quote]




Post Extras: Print Post  Remind Me! Notify Moderator
Jump to top. Pages: 1

Mushrooms, Mycology and Psychedelics >> Mushroom Cultivation

Similar ThreadsPosterViewsRepliesLast post
* Extra long gloves? Rahz 899 7 08/08/07 12:10 AM
by Blutjager
* working on a glove box... some questions buggers 2,270 8 01/12/06 08:35 PM
by buggers
* glove box arm holes
( 1 2 all )
0003 3,749 34 07/19/06 08:05 PM
by Prisoner#1
* Feedback on this glovebox? robinhood2 1,631 5 04/18/03 01:28 PM
by robinhood2
* making a glovebox
( 1 2 3 all )
quinntheeskimo 3,002 49 07/14/05 03:35 AM
by thegaruda
* Need Some help + my Dream glovebox NewbieShroomer 3,174 9 02/26/14 09:44 PM
by shaymisco
* Flowhood vs glovebox plus parts question MadHatR 3,058 15 10/27/04 05:22 AM
by MadHatR
* glovebox? Rohypnol 1,158 15 08/22/03 10:47 AM
by Bigcaps

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: Roadkill, Magash, Shroomism, george castanza, RogerRabbit, Citric, total, FooMan, 13shrooms, stonesun, cronicr, PussyFart, Tmethyl, Pastywhyte, bodhisatta
491 topic views. 33 members, 118 guests and 12 web crawlers are browsing this forum.
[ Toggle Favorite | Print Topic | Stats ]
Search this thread:
Vesp.co, Inc.
Please support our sponsors.

Copyright 1997-2018 Mind Media. Some rights reserved.

Generated in 0.033 seconds spending 0.011 seconds on 19 queries.