JostVanDyke said: Yep, I was using your calculator, and thank you very much for creating that. It's a great idea and done quite nicely.
And as a quick fix you can just add a note to the currently used interface so that people don't use the gypsum area, that or it doesn't actually add to the percentage at the bottom. Thats all you really need to do is have it not add to the percentage at the bottom and have it pop up a msgbox saying this is why. But it would still calculate the percentage on the right side so they know how much to use.
Thanks for the compliment & the thanks 
Well, the fix you mention isn't quite as "point and click" to fix as you might think, but it wouldn't be too difficult I suppose. I may do that, however, since I literally am halfway finished recoding the entire site from scratch, I may just finish the new version I'm working on...I'll mull it over.
JostVanDyke said: Edit: Updated volumes. Also raised substrate depth to 4 inches.
Spawn: 7 Quarts 60% Coir - 12 quarts [1.5 bricks] 40% Verm - 6 quarts 10% Coffee - 2 Quarts 5% Gypsum - 1.5 cups
I feel like I should mention this, so as to make sure you get an unbiased factual viewpoint on the whole "substrate mix/ratio's" subject.
It has been accurately pointed out many times that there is no "magic recipe" or "premium mix" and that you can really more or less do whatever you want, provided you get a couple of things exactly right:
Moisture content - Your substrate should be at field capacity after it is hydrated, which basically means you should be able to pick up a handful of it and not see any water dripping. Then with a light squeeze, you should be able to see a couple of drops fall from it & then lastly, if you give that same handful a good hard squeeze, you should get a small stream of water that comes from it, for just a second or two, and then it stops.
Texture/consistency - Regardless of the mix you go with, the texture after it is hydrated, should be able to be described as any of the following adjectives: light, fluffy, airy, crumbly, etc. It should not be: clumpy, muddy, sticky, dense.
Ability to retain moisture - A good substrate mix will be able to "hold" a good amount of moisture all on it's own. Vermiculite holds about 7 times it's weight in moisture, and coir about the same.
There are obviously a couple of guidelines, like don't use too much X, or always make sure that you did use X (coffee grounds & gypsum for instance).
However, if you're going to use a substrate as simple as coir/verm, you can really use the two in almost any ratio you'd like. I've even see RR say that 50/50 coir/verm would be an excellent substrate choice.
I just figured I should point all of the above out, so that you get the whole picture. Feel free to experiment and do what you like.
I personally now have my own personal "ideal mix", that I use the exact same amount of every ingredient every time. That way I know exactly how much water to add and it makes one less variable for me to take into account when working with isolates/clones.
JostVanDyke said: Thanks to sgfcchamber for the calculator and help with it!
Once again, no problem at all, and thanks for the thanks & kind words.

Good luck with your grow!
EDIT: I forgot to mention, in your new "calculations" you put in your last post after you edited it, your coir/verm percentages add up to 100%. Coffee IS a volume adding ingredient, so you want your coir/verm/coffee percentages to add up to 100% and have your gypsum % be the ingredient that puts your total above 100%.
EDIT #2 - Have a look at this very informative thread about substrate ingredients: Substrate Additives
--------------------
========================================================================================
Mushroom / Bulk Substrate Calculator <- Tells you exactly how much of what ingredients you need for any substrate for any container!
Here is the corresponding shroomery thread: http://www.shroomery.org/forums/showflat.php/Number/15656577
Easy Bulk Substrate Pasteurizer - Hands Free Operation
========================================================================================
Edited by sgfcchamber (09/05/12 12:53 AM)
|