Home | Community | Message Board


This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: Sporeworks.EU Spores for European Microscopy   Original Sensible Seeds Bulk Cannabis Seeds   North Spore Bulk Substrate, North Spore Mushroom Grow Kits & Cultivation Supplies

Jump to first unread post Pages: 1 | 2 | 3 |  [ show all ]
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
Setting up a Martha and got a couple questions. *CONTEST ADDED*
    #11522009 -

So I'm going to go with a 4 tier greenhouse and just want some input on my humidification and fae. I've been reading conflicting stories on how people are getting humidity and good fae.

some people say coolmist and an ultrasonic are the way to go for optimal fae and humidity.

others say just a coolmist inside 24 hrs with slits. or just a ultrasonic piped in from the outside set on a timer.

i think i'm going to start with a coolmist sitting on the bottom of my greenhouse (in the tub of perlite that will catch the excess water) and pipe the intake out of the greenhouse to the room so i know fresh air will always becoming in. it's going to be a coolmist
like this\
http://www.iallergy.com/popup_image.php?pID=520&osCsid=f2604f8f31c214f69ed6151fd69cd1c4

has anybody tried something simple like that and had good humidity?

i know keeping the coolmist in the martha w/o piping the intake will recycle it's own humid air and up the humidity. but i just dont want to shy on the fae.

Edited by passenger (01/05/10 11:17 AM)

Extras: Filter Print Post Top
Re: Setting up a Martha and got a couple questions. [Re: passenger]
    #11522049 -

That will work great! One cool mist is all you need for that setup. Just get a good timer and spend some time tweaking and you'll have a very nice setup!

Extras: Filter Print Post Top
Re: Setting up a Martha and got a couple questions. [Re: Messiah of Savants]
    #11522087 -

could never get a coolmist to get enough humidity in my situation


--------------------
What did you kidnap Big Bird?

Extras: Filter Print Post Top
Re: Setting up a Martha and got a couple questions. [Re: Messiah of Savants]
    #11522092 -

By the way, that's the same cool mist unit I have. Works great!

Extras: Filter Print Post Top
Re: Setting up a Martha and got a couple questions. [Re: Messiah of Savants]
    #11522125 -

If it's a standard martha size or 4-tier greenhouse size, one cool mist is all you need. I've never had any problems keeping 95%+ humidity in that size of an area. Just remember it's alot easier to keep high humidity in a greenhouse that is full of cakes/tray/perlite tray than empty. Also just a few slits can make a big difference +/- in your RH level too.

Extras: Filter Print Post Top
Re: Setting up a Martha and got a couple questions. [Re: Messiah of Savants]
    #11522137 -

thanks for the replys. I'll def have to build a resivoir though for it being that it only lasts 12 hours.

Extras: Filter Print Post Top
Re: Setting up a Martha and got a couple questions. [Re: passenger]
    #11526339 -

im thinking if i dont have four projects in the martha at one time i can just fill up the empty space with trays of damp perlite as well.

Extras: Filter Print Post Top
Re: Setting up a Martha and got a couple questions. [Re: passenger]
    #11529722 -

passenger said:
im thinking if i dont have four projects in the martha at one time i can just fill up the empty space with trays of damp perlite as well.



definitely.

either run the cool mist all the time and have a few slits in the GH walls for fae, but you dont need outside air at that point.

or put it on a timer, and put the CM outside the GH, easier to refill.  thats if you want to fuck with tubing.  i like to incorporate an ultrasonic somewhere so i can see the flow of FAE from the heavy mist mixing in with the CM air.

Edited by Michael Logical (11/27/09 01:36 PM)

Extras: Filter Print Post Top
Re: Setting up a Martha and got a couple questions. [Re: Michael Logical]
    #11590379 -

so i just got my new humidifier in the mail today and it says that it's a "pediatric coolmist impeller" type humidifier. I guess  I didnt notice this when i ordered it. Is this going to make any difference? Do these things put out less water vapor than lets say a humidifier that isnt for infants or small children?

Extras: Filter Print Post Top
Re: Setting up a Martha and got a couple questions. [Re: passenger]
    #11590415 -

a cool mist will work fine, it takes a minute to get everything dialed in. I used one for 5 or so months.

Then I switched over to monotubs and haven't looked back. It is so much easier and you don't have to worry about bacteria building up in the cool mist and the hoses, not to mention you can't really leave the coolmist setup for more than 2 days.

Extras: Filter Print Post Top
Re: Setting up a Martha and got a couple questions. [Re: passenger]
    #11590485 -

I used to use a Martha set-up a number of years ago.  I used a cool mist on low 24/7 and then had an ultrasonic coming on for 10 minutes every hour.  I lived in an arid mountainous region where it would have been impossible to keep my RH up without both.  Keeping the cool mist outside the setup and on all the time (it had a low setting) assured me constant FAE (slight positve pressure inside the martha pushing old stale air, and CO2, out the top and bottom). The ultrasonic basically did my misting for me once an hour. Fill up your humidifiers once every couple of days and watch the magic happen.  You can add a touch of h2o2 to your water to prevent your humidifiers from doing their own little grows that you don't want.  You'll need to play with it for a few days to get the timing right for your areas ambient RH.
Here's a pic:


I have to agree with the above though, monotubs are my new gig and have the best effort/cost/benefit ratio IME.


--------------------
This is not me...

Extras: Filter Print Post Top
Re: Setting up a Martha and got a couple questions. [Re: ganjababy]
    #11590709 -

ive had the humidifier in the martha for over an hour and the rh is only in the mid 70's!

ive actually been doing mono's for over a year and decided to give the martha a shot.

Extras: Filter Print Post Top
Re: Setting up a Martha and got a couple questions. [Re: passenger]
    #11591104 -

You must have pretty dry ambient air.  Is your room temp in the mid 70's?  Even raising your room temp a few degrees will allow the air to hold more water.  Like someone said above, your subs will up it a bit too.  You might need that ultrasonic after all--you can find em pretty cheap. 

Curious--why the switch to a martha after monotubs?


--------------------
This is not me...

Extras: Filter Print Post Top
Re: Setting up a Martha and got a couple questions. [Re: Dharmatripper]
    #11616366 -

Yeah I do have really dry ambient air. My RH in the house is right around 25-30%. It's dry here.


So the cool-mist inside greenhouse brought the Rh in the green house up to around 98% after a few hours (with a tray of perlite) with no slits in the Martha.
So i decided to test it out and put a sub from a mono i just dunked after its first flush in the Martha and see how it would fruit. It was sitting in there maybe a day and a half and got trich.
I don't know if the sub already had trich in it or if it was from lack of fae. but Ive talked to people on here saying they had just fine luck with just keeping the cool-mist inside the greenhouse.

what do you guys think? how many slits should i put on the Martha if i do?  thanks all

Extras: Filter Print Post Top
Re: Setting up a Martha and got a couple questions. [Re: passenger]
    #11622864 -

does anybody have any idea's?

Extras: Filter Print Post Top
Re: Setting up a Martha and got a couple questions. [Re: passenger]
    #11622905 -

this is what i did with mine
i piped my ultra sonic in thru the top
and ran it 24/7

the coolmist sits in the bottom
running 30 min on an hour and a half off

for the door i just left it unzipped


  -noobie-


--------------------
AMU

Best Thread Ever
CapZilla said:
not sure what GE and FAE are but i should probably get some.

Citric said:
Your signature is wrong on colonization temps!

GOOD JUDGMENT COMES FROM EXPERIENCE
EXPERIENCE COMES FROM BAD JUDGMENT

ROOM TEMP 70-75 IS BEST FOR COLONIZATION
Thank you mycochef

Extras: Filter Print Post Top
Re: Setting up a Martha and got a couple questions. [Re: noobieshroomie]
    #11649143 -

So the ultra sonic in your setup ran all the time? Every other post i read had the coolmist running all the time and the ultra sonic coming on in intervals. I only have a coolmist and hoping i can just get away with running that but i dont know.

Extras: Filter Print Post Top
Re: Setting up a Martha and got a couple questions. [Re: passenger]
    #11649215 -

yep i used the ultra sonic for RH
and the cool mist for FAE

my ultra has a mist output setting on it
i put it on medium that way it didnt flood my GH

  -noobie-


--------------------
AMU

Best Thread Ever
CapZilla said:
not sure what GE and FAE are but i should probably get some.

Citric said:
Your signature is wrong on colonization temps!

GOOD JUDGMENT COMES FROM EXPERIENCE
EXPERIENCE COMES FROM BAD JUDGMENT

ROOM TEMP 70-75 IS BEST FOR COLONIZATION
Thank you mycochef

Extras: Filter Print Post Top
Re: Setting up a Martha and got a couple questions. [Re: noobieshroomie]
    #11649344 -

I have my cool mist outside the GH running one hour on, one hour off, 24/7. It keeps the RH at 100% if I keep the door zipped.

I still mist however, as I don't have an ultrasonic.



The perlite at the bottom is actually dry...I keep meaning to remove it.


--------------------
Gypsum/Drywall Tek
The Story Of Russell The Texas (Cube) Bear



The human race's prospects of survival were considerably better when we were defenceless against tigers than they are today when we have become defenceless against ourselves.
-Arnold J. Toynbee

Extras: Filter Print Post Top
Re: Setting up a Martha and got a couple questions. [Re: nexus1946]
    #11649494 -

i see Russell:smile:

-noobie-


--------------------
AMU

Best Thread Ever
CapZilla said:
not sure what GE and FAE are but i should probably get some.

Citric said:
Your signature is wrong on colonization temps!

GOOD JUDGMENT COMES FROM EXPERIENCE
EXPERIENCE COMES FROM BAD JUDGMENT

ROOM TEMP 70-75 IS BEST FOR COLONIZATION
Thank you mycochef

Extras: Filter Print Post Top
Jump to top Pages: 1 | 2 | 3 |  [ show all ]

Shop: Sporeworks.EU Spores for European Microscopy   Original Sensible Seeds Bulk Cannabis Seeds   North Spore Bulk Substrate, North Spore Mushroom Grow Kits & Cultivation Supplies


Similar ThreadsPosterViewsRepliesLast post
* coolmist/ultrasonic humdifier enough?
( 1 2 all )
cdlove69 5,869 21 09/18/05 12:02 AM
by NeedSomeMagic
* BabySpore Has A Couple Questions???? BabySpore 1,262 2 05/17/02 07:06 PM
by BabySpore
* Couple Questions cgrossoman 1,660 10 02/18/02 11:02 PM
by Anno
* A couple questions havinfun 1,290 7 05/21/01 07:04 PM
by hatter
* a couple questions *DELETED* TeRzMaStA 827 4 10/25/01 07:23 PM
by gaastra
* Just a couple questions... GreyMatter 715 1 04/13/02 11:58 PM
by cgrossoman
* A couple questions MrPappagiorgio 827 2 05/09/01 12:34 AM
by sylo
* Re: A couple questions Humidity 822 2 04/12/00 05:01 PM
by Anonymous

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: DERRAYLD, Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
4,546 topic views. 6 members, 316 guests and 248 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.031 seconds spending 0.008 seconds on 18 queries.