Home | Community | Message Board

MagicBag Grow Bags
This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: Sporeworks.EU Spores for European Microscopy   North Spore North Spore Mushroom Grow Kits & Cultivation Supplies   Unfolding Nature Unfolding Nature: Being in the Implicate Order

Jump to first unread post Pages: 1
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
What temp do you use to bring your PCs up to pressure?
    #4430555 -

Is there any reason not to use "high" heat until it jiggles, then cut it down to medium low?


--------------------
Through the excercise of patience, one may learn humility..

Smoke plenty of green, and eat fungus!!!!
:peace::heart::slomo::gd_icon::gd_icon::gd_icon::slomo:


Trip Report

Extras: Filter Print Post Top
Re: What temp do you use to bring your PCs up to pressure? [Re: Smallworlds]
    #4430563 -

thats what i do, high heat till 10 psi and then 3 until 15 and then 1 to keep pressure


--------------------
Check out the official MushroomWiki at http://www.mushroomwiki.com. Stop by and contribute.

Extras: Filter Print Post Top
Re: What temp do you use to bring your PCs up to pressure? [Re: xburn]
    #4430620 -

ditto, you're just boiling water, not making eggs. it doesn't matter how fast it boils.


--------------------
You are a filipina sex goddess who wants to fuck me until I fall asleep, so then you can tickle my balls and see if the legend of my diamond filled nutsuck is true.  I am a white man from costa rica, who smells like lime jello.


I can flash/jtag/repair 360's, pm for details.

Extras: Filter Print Post Top
Re: What temp do you use to bring your PCs up to pressure? [Re: Smallworlds]
    #4430713 -

although if they are old jars you can break them by brining them up to fast if the have stress fractures already..... never happened to me.... kinda like force cooling your jars but the opposite


--------------------
Check out the official MushroomWiki at http://www.mushroomwiki.com. Stop by and contribute.

Extras: Filter Print Post Top
Re: What temp do you use to bring your PCs up to pressure? *DELETED* [Re: xburn]
    #4430905 -

Post deleted by no1joe

Reason for deletion: 1


Extras: Filter Print Post Top
Re: What temp do you use to bring your PCs up to pressure? [Re: no1joe]
    #4431035 -

Leave the rocker/weight off til it is boiling for a good 5 minutes as a general habit, that flushes the air from the system. (canning terms as "blowing") No biggy here, but for canning it is a must on low acid stuff, like beans and mushrooms if you are vacuum packing and makes the temp more accurate. Your right, turn the heat as low as you can and still rock to save water. The cooker won't get any hotter even though the heat was way up, it is the nature of boiling water under pressure.

Extras: Filter Print Post Top
Re: What temp do you use to bring your PCs up to pressure? [Re: red914]
    #4431047 -

just go for it dude !!! :bongload:


--------------------
:bongload: Look into my heyes !! :bongload:

Extras: Filter Print Post Top
Re: What temp do you use to bring your PCs up to pressure? [Re: Smallworlds]
    #4431621 -

When you do spawn bags, you have to cook for three or four hours if the cooker is packed. That's why I always bring it up real fast and cut the heat back down. I heat up the cooker on high until it jiggles and then cut back down a single button. Once that starts to giggle at that setting (usually a couple hours), I cut back down one more and finsh it on that setting (medium).

Extras: Filter Print Post Top
Re: What temp do you use to bring your PCs up to pressure? [Re: Blue Helix]
    #4432033 -

Ouuu..you guys made me real confused. I am pressure cooking tomarrow morning, so should I bring it up to high heat and then drop it to medium? Or should I just bring it to high and do that for the entire hour? I have all new jars so I fractures may not be a problem. PM me if you can otherwsise post here, thanks alot.


--------------------
A man that comes to the door is never quite the same man who went out.

Freedom is something that dies unless it's used

Extras: Filter Print Post Top
Re: What temp do you use to bring your PCs up to pressure? [Re: newmodel]
    #4432181 -

High


--------------------
Getting the most out of your casings!, A pinning strategy.
Oyster Shell "Flour" $2 for 1lb. a hell of a deal :wink:
Not what is overlay but rather what overlay is
Gas Exchange vs. FAE

"We all have priorities. I used a closet once setup a nice little lab trouble was all the shit that was in there ended up in the bedroom that pissed off the GF then I ended up dumping her as she was getting in the way of my sterile culture technique! Ya I got priorities too!!!"

Extras: Filter Print Post Top
Re: What temp do you use to bring your PCs up to pressure? [Re: hyphae]
    #4432198 -

hyphae said:
High



LOL............. so do I :grin:
:mushroom2: :mushroom2: :mushroom2: :mushroom2: :mushroom2: :mushroom2:


--------------------

Extras: Filter Print Post Top
Re: What temp do you use to bring your PCs up to pressure? [Re: agar]
    #4432294 -

Highest power possibly. You will only crack jars by dumping cold ones in boiling water, I could not imagine a normal cooker being able to heat water so fast that it would crack jars.
The more power the better since once the water starts to heat it gives off steam, if your rocker/valve is ticking over for an hour before you get a seal you will have lost some water and risk running the PC dry.
Once sealed and up to pressure lower the power to the minimum needed, this again stops steam escaping and the risk of running dry.

Extras: Filter Print Post Top
Re: What temp do you use to bring your PCs up to pressure? [Re: Smallworlds] * 1
    #4432718 -

In my view, you want to bring it up on high and cut it back until the weight is barely moving or just about to move but doesn't. Personally, I don't like hearing that weight jiggle for hours, so I cut back until it's just about to move but isn't moving. Plus when you do spawn bags you gotta pressure cook for hours. Running the cooker on high for hours with the weight jiggling like crazy will dry the cooker out and the bags out since there is too much steam blow off. It's pointless to run it high like that.

Extras: Filter Print Post Top
Re: What temp do you use to bring your PCs up to pressure? [Re: Blue Helix]
    #4433081 -

:laugh:


--------------------
Getting the most out of your casings!, A pinning strategy.
Oyster Shell "Flour" $2 for 1lb. a hell of a deal :wink:
Not what is overlay but rather what overlay is
Gas Exchange vs. FAE

"We all have priorities. I used a closet once setup a nice little lab trouble was all the shit that was in there ended up in the bedroom that pissed off the GF then I ended up dumping her as she was getting in the way of my sterile culture technique! Ya I got priorities too!!!"

Extras: Filter Print Post Top
Re: What temp do you use to bring your PCs up to pressure? [Re: Blue Helix]
    #4433085 -

Definitely don't run a PC on high! (bomb!) you could blow either a seal or safety plug. Excessively jiggling weight will keep pressure lower than what you want and as Blue Helex said will run your PC dry! Power up high and when the weight jiggles turn it down until it jiggles as recommended which with all mine have been 3-4 times a minute. If the weight doesn't jiggle you will also be under the target psi. IME.


--------------------
Getting the most out of your casings!, A pinning strategy.
Oyster Shell "Flour" $2 for 1lb. a hell of a deal :wink:
Not what is overlay but rather what overlay is
Gas Exchange vs. FAE

"We all have priorities. I used a closet once setup a nice little lab trouble was all the shit that was in there ended up in the bedroom that pissed off the GF then I ended up dumping her as she was getting in the way of my sterile culture technique! Ya I got priorities too!!!"

Extras: Filter Print Post Top
Re: What temp do you use to bring your PCs up to pressure? [Re: agar]
    #4433092 -

agar said:
hyphae said:
High



LOL............. so am I :grin:





--------------------
"life is like a drop of rain getting closer and closer to falling into a lake, and then when you hit the lake there is no more rain drop, only the lake."

Growing with bags, start to finish (including my new grain and substrate prep)
Anyone looking to start bulk tubs/mono tubs/shotgun hybrids? Good tubs to use..
How I do grain (old still good tips)
Turn your closet into a fruiting chamber
Casing layer colonization and overlay

Extras: Filter Print Post Top
Re: What temp do you use to bring your PCs up to pressure? [Re: scatmanrav]
    #4433098 -

Of course you dont leave it on high the whole time. Goes on high to start, then when it hits around 17PSI, stove goes to LOW...I dont use a rocker type PC, so low is enough to keep the pressure right where its at. Sometimes it needs to be between WM and LOW (less then low) if its more empty on a run..


--------------------
"life is like a drop of rain getting closer and closer to falling into a lake, and then when you hit the lake there is no more rain drop, only the lake."

Growing with bags, start to finish (including my new grain and substrate prep)
Anyone looking to start bulk tubs/mono tubs/shotgun hybrids? Good tubs to use..
How I do grain (old still good tips)
Turn your closet into a fruiting chamber
Casing layer colonization and overlay

Extras: Filter Print Post Top
Jump to top Pages: 1

Shop: Sporeworks.EU Spores for European Microscopy   North Spore North Spore Mushroom Grow Kits & Cultivation Supplies   Unfolding Nature Unfolding Nature: Being in the Implicate Order


Similar ThreadsPosterViewsRepliesLast post
* AA PC pressure gauge (and im sorta lost) bjkroll 819 2 06/22/03 02:26 PM
by Odin 13
* Determining PC Pressure? distortion 780 4 05/01/03 11:30 PM
by Che_Night_Soil
* question about pressure cookers djneutron 1,573 7 10/20/02 07:26 PM
by On_the_Down-Low
* pressure cooker problem pauledangerously 2,308 8 09/19/01 12:04 AM
by oscill8
* Pressure Canner Explosion? AtticMonkey 2,019 13 05/23/01 04:42 PM
by tom
* pc'd my millet now it looks burnt? amyloid 1,184 9 01/16/04 09:26 AM
by thechemist
* Mycostarter, will it withstand 30 min. PC?? Visigoth 870 2 10/03/02 02:02 AM
by matts
* PC question AKA PC 1,451 5 04/09/03 01:33 AM
by AKA PC

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: DERRAYLD, Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
1,842 topic views. 15 members, 508 guests and 174 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.028 seconds spending 0.004 seconds on 14 queries.