Home | Community | Message Board

Avalon Magic Plants
Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Jump to first unread post Pages: 1
Offlinetedbundyjr
Stranger
Registered: 06/06/01
Posts: 11
Last seen: 20 years, 2 months
terrarium specs help (cool mist)
    #338490 - 06/11/01 08:10 PM (20 years, 4 months ago)

I have a rubbermaid 115L (122Q) type bin with a lid. I am planning on using a coolmist humidifier plugged directly into it on the top left side. Now i was wondering what would be the best way to put an exi valve on there. should i put it directly on the bottom middle so air and excess water can leak out. maybe some type of hosing an inch or so draped into a cup of h202. this would require me putting the tub on blocks. any ideas on if this will work. how big should i make the exit hole(s?). any ideas on my design or any help.
i am planning on casing in vermiculite, and maybe putting 2 reg pf cakes in there too or should i just stick to one or the other?
thanx any help would be cool.
ted



--------------------
http://ted_bundy_jr.tripod.com you have been warned


Extras: Filter Print Post Remind Me! Notify Moderator Top
InvisibleBrownPastures
old hand

Registered: 03/16/01
Posts: 968
Loc: here
Re: terrarium specs help (cool mist) [Re: tedbundyjr]
    #338652 - 06/11/01 11:30 PM (20 years, 4 months ago)

A monkey of mine used to have a humidifier which conveniently had a 1" hole which the goodies came out of... he purchased himself some clear flexible tubing and glued it to the hole- then he ran it inside what you already own. The humidifier should be below the exhaust of the tubing so water condensation can flow down back into the humidifier.The hole pumping in your air should be high on the wall of your terr.
The hole for letting stagnant air out should be low on the wall of your terr and prefferably adjacent to your humidifier hole. you dont need more than 1/4 - 1/2" hole.
peace

"slutguts" - auto59009
Drool Donkey Island

Edited by BrownPastures on 06/11/01 11:33 PM.



Extras: Filter Print Post Remind Me! Notify Moderator Top
Jump to top Pages: 1


Similar ThreadsPosterViewsRepliesLast post
* Post deleted by Administrator Anonymous 886 5 07/20/02 04:58 AM
by cecil
* Best Cool Mist Humidifier to order? Erawk 4,586 16 02/12/06 09:38 PM
by pipeDream
* adding holes to cool mist humidifier??? Visigoth 1,270 4 07/17/02 01:17 PM
by Terrarium_Guy
* cool mist humidifier or perlite? XAZIA 1,915 5 08/27/01 05:54 PM
by teonanacatl1
* vicks cool mist humidifier MycelusWallace 1,755 12 02/03/03 09:59 AM
by MycelusWallace
* question about cool mist humidifier Farmer Pat 1,915 16 01/04/07 10:56 PM
by RogerRabbit
* Vicks cool mist humidifier ShroomyMcPot 1,703 1 07/20/02 10:18 AM
by BIGSWANG
* vicks v400 cool mist humidifier in germany MycelusWallace 1,903 7 06/26/02 10:31 AM
by NFG_Getupkid

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: Shroomism, george castanza, RogerRabbit, FooMan, mushboy, fahtster, LogicaL Chaos, 13shrooms, stonesun, wildernessjunkie, cronicr, Pastywhyte, bodhisatta, Tormato
523 topic views. 31 members, 156 guests and 17 web crawlers are browsing this forum.
[ Print Topic | ]
Search this thread:

Copyright 1997-2021 Mind Media. Some rights reserved.

Generated in 0.029 seconds spending 0.01 seconds on 16 queries.