Home | Community | Message Board
You are not signed in.
Sign In New Account
Forum Index Search Posts Trusted Vendors Highlights Galleries FAQ User List Chat Store Random Growery

MagicBag Grow Bags
This site includes paid links. Please support our sponsors.

Mushrooms, Mycology and Psychedelics > Mushroom Cultivation
Threaded Mode Threaded  Previous topic Previous  View all topics Index  Next topic Next 

Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: Myyco.com Pan Cyan Liquid Culture For Sale   MagicBag.co Certified Organic All-In-One Grow Bags   Sporeworks.EU Spores for European Microscopy   North Spore Bulk Substrate   Mushroom-Hut Substrate Mix   Unfolding Nature Unfolding Nature: Being in the Implicate Order   Original Sensible Seeds Bulk Cannabis Seeds

Jump to first unread post Pages: 1
setting up a Martha with an AC Infinity cloudforge T7 humidifier
    #29674324 -

I got this tent, locally, used, for cheap, and immediately took out the fan that came with it.  I put the humidifier's tube in the hole that the fan came out of (at the top/back of the tent), and turned the humidifier on a 15min on / 15min off cycle, following the recommendations of 99.99


Quote:
99.99 wrote:
First off all the fans and all the garbage that you would hook up on Martha is not needed because the external humidifier gives plenty of fresh air exchange. This is my unit and my set up.



But 99.99 uses a different humidifier.  this cloudforge T7 pumps out a ton of water, and it quickly started raining in the tent, and filling the floor tray, so that was way too much water. 


I learned that the cloudforge has settings to adjust how much moisture is put out while its running, so i turned it down to the 1 setting (low)... for now.

I need to figure out what moisture setting to use in combination with on/off time intervals.  I hope to not rely on the RH meter, just the timer.

There is a lot more spawn ready to be spawned in here.  so far there are tampanensis and subtropicalis trays in there.

and Pan bisporus and cyanescens will be spawned with pasteurized substrate tomorrow.

I realize these species like different conditions, slightly.  but I want to let these things out of the jars and have them tell me how they like it. 

what moisture level setting is good, at which intervals?

Extras: Filter Print Post Top
Re: setting up a Martha with an AC Infinity cloudforge T7 humidifier [Re: Generic]
    #29674612 -

It didn't feel right suggesting something you said you didn't really want to do, but since you have no replies and asked the same in the confessional I'll do it anyway :hehehe:

I have the T3 and I have been using the auto function since day one, you can't use the rH % to dial in the tent, you will have to monitor the casing and/or surface conditions until it's dialed in.

Other things that will influence conditions are what kind of trays you use, how deep the substrate is, what the casing is made of, how high the walls on the trays are, how full the tent is etc. So dialing it in can only happen when you have something in the tent and by using your eyes.

Then there's also the fact that a automated setup isn't 100% automated, right after casing you might have to manually mist, when the fruits fill the trays you might have to dial down the humidity some, some fruits love being misted but will not tolerate a soggy substrate.

The auto function has been very consistent for me, and I suggest you at least try it :awesomenod:


--------------------
“All Fungi are edible.

Some fungi are only edible once.”
― Terry Pratchett


Extras: Filter Print Post Top
Re: setting up a Martha with an AC Infinity cloudforge T7 humidifier [Re: Kloakk]
    #29674627 -

Auto-what?  based on the VPD? or RH?  or auto-on/off timers, theres so much automation possible

the touch-screen computer-like nature of this humidifier is confusing... i just figured out the on/off timer cycle the second time after reading their instructions.

Thanks for the help kloakk, what auto-setting do you have yours at?  and what's your tent like?

Extras: Filter Print Post Top
Re: setting up a Martha with an AC Infinity cloudforge T7 humidifier [Re: Generic]
    #29674643 -

This type of humidifier is really nice because you can adjust from basically nothing to full on fog

I like it because you can find a comfortable setting. I do this one about halfway and then I set up a timer to turn on and off every 15 minutes and therefore I can adjust the amount of moisture that comes out of the humidifier and the time the humidifier is on.

https://a.co/d/06Fcwqtq

I also leave the tub ,the tent sits in with about 3 inches of water in it to seal up around the bottom of the tent this acts as a gasket to help keep moisture inside the tent when the humidifier is not on

Normally, I can tell the humidity is right by it being slightly foggy inside the tent, but tamps love it wet so as long as your stuff does not pool in water, it is great. I normally keep holes in my aluminum trays to let the excess water drip out.

This i the tray i use
https://www.homedepot.com/p/Black-Large-Concrete-Mixing-Tub-A-42/318924309

Yuo need to check dimensions and make sure the tent you have fits all the standard Martha tents do fit

Edited by 99.99 (09/21/26 02:59 PM)

Extras: Filter Print Post Top
Re: setting up a Martha with an AC Infinity cloudforge T7 humidifier [Re: 99.99]
    #29674653 -

ok i like that that is cheap and simple, but I already got this cloudforge, and they can also be adjusted to almost nothing to full fog (1-5), and has a timer.  so maybe i'll try putting the fog intensity on 2 or 3 for 15min on/15min off.

looks like in mixing up suggestions from different people i got an overly complicated and more powerful humidifier than was necessary for this little tent.


Funny thing is my friend wanted a 4x8 grow tent, vivosun, and went ahead and bought that earlier.  I said that's way bigger than we need and to return it.  turns out he can't return it, so we have that sitting around.  Also i have enough spawn to max out this martha x2 right now, so maybe we should just set up that big 4x8 tent with this cloudforge...  it might actually be better with how long subtropicalis can be in the tent for.

Extras: Filter Print Post Top
Re: setting up a Martha with an AC Infinity cloudforge T7 humidifier [Re: Generic]
    #29674674 -

Generic said:
Auto-what?  based on the VPD? or RH?  or auto-on/off timers, theres so much automation possible

the touch-screen computer-like nature of this humidifier is confusing... i just figured out the on/off timer cycle the second time after reading their instructions.

Thanks for the help kloakk, what auto-setting do you have yours at?  and what's your tent like?


I let the RH sensor determen when the humidifier turns on and off, I believe it is the only function that says auto on the display.

I don't have a tent, I have dreamer tubs, but that shouldn't matter. Since you have the big T7 I would set the fog amount to 1 as I believe you wrote you already have and start at 80% RH and just dial it in from there.


--------------------
“All Fungi are edible.

Some fungi are only edible once.”
― Terry Pratchett


Extras: Filter Print Post Top
Re: setting up a Martha with an AC Infinity cloudforge T7 humidifier [Re: Kloakk]
    #29674690 -

Well, all I can say is what I have and how I do it,… not that it is the best way, but it’s the way that works great for me so keep trying. You’ll find something that works out.

But I would like to say you need something at the bottom of that greenhouse to collect extra moisture even a small kid pool would work out. It would help keep the moisture inside the tent as well as keeping the water from running all over.

Edited by 99.99 (09/21/26 04:00 PM)

Extras: Filter Print Post Top
Re: setting up a Martha with an AC Infinity cloudforge T7 humidifier [Re: 99.99]
    #29675817 -

thanks for the input. My friend had changed the humidifier to the 0 setting (i guess it's 0-5, not just 1-5) on for 2 mins off for 20, that's been keeping the sensor at 93%, the walls are dry, and the top of the substrates look, pretty dry, with maybe a droplet of water or two, but probably on the dry side. 

this is what the trays from 9/18 look like now (p. tampanensis and p. subtropicalis)


We spawned 7 trays of pans in the FC and it looked like this



then we realized that if we switched the wire racks around, removing a gap on the top rack (which may have been a stupid move, as that was designed to allow circulation)


(also removing the sticker on the front so as to remove vendor names and not endorse that overpriced product)
In this picture you can see that there is a tray at the bottom that the whole tent sits in, though it would only hold an inch or so of water and would be hard to make it work for that gasket effect 99.99 mentioned.


then we could fit 12 trays total, so 9 pan trays were spawned today (pan bisporus colville, pan cyanescens portland, and pan cyanescens peace river), although the pasteurized substrate did sit in the bag for 4 days, which was longer than i was hoping for, and it smelled like urea, especially at the bottom, i hope it's good enough.


to answer all the questions about why i prefer using the timer rather than the auto RH function, it's because of a general distrust in hygrometers, but also because when we tried that, (ok i admit it was set to 93%RH, not 80 like kloakk suggested)  the humidifier would maintain 93% but would never cycle off, it would just continue to run.  especially with pans, they rely on an evaporation cycle to cool themselves (says tree frog), rather than staying at a consistent RH, so cycles of wetter conditions followed by evaporation are what I thought I was going for.

Extras: Filter Print Post Top
Re: setting up a Martha with an AC Infinity cloudforge T7 humidifier [Re: Generic]
    #29675840 -

Generic said:
To answer all the questions about why i prefer using the timer rather than the auto RH function, it's because of a general distrust in hygrometers, but also because when we tried that, (ok i admit it was set to 93%RH, not 80 like kloakk suggested)  the humidifier would maintain 93% but would never cycle off, it would just continue to run.  especially with pans, they rely on an evaporation cycle to cool themselves (says tree frog), rather than staying at a consistent RH, so cycles of wetter conditions followed by evaporation are what I thought I was going for.


You might have made the same mistake I did when I first got the cloudforge. When using the AUTO mode you also have to configure the ON mode and OFF mode.

The amount of fog coming out when AUTO mode is triggered by the sensor will be what you set it to in ON mode, but if the fog input is not set to 0 in OFF mode it will not come to a complete stop.





It does say so in the manual, but I'm slow and it took me a good hour to understand what I was reading :muppet:

Edit: I would start at 80% because you don't want to flood your trays, usually I will run it on 85-95% depending on species and time of the year because of humidity of the indoor environment.


--------------------
“All Fungi are edible.

Some fungi are only edible once.”
― Terry Pratchett


Extras: Filter Print Post Top
Re: setting up a Martha with an AC Infinity cloudforge T7 humidifier [Re: Kloakk] * 2
    #29675854 -

So a couple things that I’ve noticed
First off, do your trays have holes poked in them to allow excess water to drip through therefore, your pans can be a lot wetter than they look they look kind of dry to me
This photo was normally how wet I keep mine


Second, if you stagger your trays like this three on a shelf, you can still get 12 trays in your Martha, but with this set up, the moisture is able to get between all the trays




Third, if you use oversized plastic lids for your trays, it lets the humidity of the Martha keep your substrate, wet and humid without getting water on your substrate
When I grow pans, this is what I do with them until I am ready to pick


Like this





Pans are notorious for a boarding if they get too much water as pins so it is necessary with them, but not tamps


Edited by 99.99 (09/23/26 02:38 AM)

Extras: Filter Print Post Top
Re: setting up a Martha with an AC Infinity cloudforge T7 humidifier [Re: 99.99]
    #29679132 -

do you only cover the pans with the top pan when its ready for pinning or do you do it at all times?

Extras: Filter Print Post Top
Re: setting up a Martha with an AC Infinity cloudforge T7 humidifier [Re: Cajungamerdad]
    #29679182 -

Cajungamerdad said:
do you only cover the pans with the top pan when its ready for pinning or do you do it at all times?


They are covered from the point of starting to pin all the way till just about harvest time
Then I leave it off let the substrate rehydrate

Extras: Filter Print Post Top
Re: setting up a Martha with an AC Infinity cloudforge T7 humidifier [Re: 99.99]
    #29691217 -

update here, sorry for not following the advice of getting trays over the pans to prevent dripping; couldn't find such a thing so far, but that would be good.

a couple of days ago my friend saw the pan trays and thought it was cobweb mold, so he put a fan on in there to dry things out.  that dried them out all right, especially the bottom shelf closest to the fan..


I came to see things a couple days ago, said that's just pan mycelium/possibly overlay and said no more fan, I gave them a mist, and we put the humidifier back on to the low setting (0) for 1 minute, off for 22 minutes.  This was the setting he found to keep it humid in there without raining...  after a day of that humidifier timer, this is what they looked like... (the pan bisporus on the bottom tray)


The top tray seems less dried out from the fan, as it was furthest away and the top is closest to the humidifier input...  these are pan cyans


The tamps on the middle shelf started to fruit


and i guess we only spawned one tray of subtropicalis, that's also fruiting



Last night we made a peat/lime casing, and today he pasteurized it and applied it (hopefully)  I was waiting for him to tell me when the first is fully colonized, and my bad, we got to the casing late, as he didn't know what to look for for full colonization.


What i noticed in there was that because the martha was pretty much sealed, the timer schedule of 1min on/22min off felt stagnant and hot (high 70's)..
since the FAE was coming from the 1min of the humidifier, and it couldn't be set any lower than 0 for 1 minute, I decided to un-zip a little bit of the door (at the bottom) and change the off cycle to 15mins... so now there is more breathability to prevent buildup of moisture and create rain, as well as more frequent cycles of the humidifier...

I haven't been back to check how that is, or heard back... i just figured it needed more FAE, not based off of fruits, but how it felt in there, and logic.  Time for fruits, hopefully they're cased now, but we still haven't dialed in the conditions.

Extras: Filter Print Post Top
Re: setting up a Martha with an AC Infinity cloudforge T7 humidifier [Re: Generic]
    #29691223 -

those might be trash at this point :sad:

tubs are way easier. marthas are not worth the hassle unless you know exactly what you are doing and what to look for.


--------------------
:hypnotoad:
Making Liquid Culture :  Go insane with LC
Mushboy likes these teks : Making shroom tea
Dank Education

Extras: Filter Print Post Top
Re: setting up a Martha with an AC Infinity cloudforge T7 humidifier [Re: mushboy]
    #29691786 -

thanks for the input, and it's agreed that they might be tossed outside soon, but I should have run some test trays in the martha before inoculating, so at least these can serve as test samples to dial in the conditions.

I'm not going for easy tubs, I'm hoping for good fruit morphology while trying for a simple/minimalist martha setup.  I've done plenty of tubs, and bisporus and subtrops will work in a tub, but tamps? (really idk about those, haven't seen those look good)?  and are they the healthiest?  and is it really that simple if you have to mist often but aren't there to do so?

I'm just trying to dial in a simple martha at this point, any pointers?

Extras: Filter Print Post Top
Re: setting up a Martha with an AC Infinity cloudforge T7 humidifier [Re: Generic]
    #29691800 -

When I was setting mine up, I found the write up in Hindsight's journal to be very helpful.

I'm running 2 small fogging discs in a 4 gallon tote, a computer fan on the lowest setting blowing air into the tote and pushing humidity through a dryer duct up to the top of my martha.  I also have a cheap bathroom fan exhausting from the bottom of the martha.  I set it up for an air exchange and fogging every 12-15 minutes or so.

I believe I have it set up to vent first, then fog.  Lots of ways to do it though, and a little experimentation goes a long way once you understand what you're looking for.


--------------------
O son of Kunti, I am the taste of water, the light of the sun and the moon, the syllable om in the Vedic mantras; I am the sound in ether and ability in man.

Extras: Filter Print Post Top
Jump to top Pages: 1

Shop: Myyco.com Pan Cyan Liquid Culture For Sale   MagicBag.co Certified Organic All-In-One Grow Bags   Sporeworks.EU Spores for European Microscopy   North Spore Bulk Substrate   Mushroom-Hut Substrate Mix   Unfolding Nature Unfolding Nature: Being in the Implicate Order   Original Sensible Seeds Bulk Cannabis Seeds

Mushrooms, Mycology and Psychedelics > Mushroom Cultivation
Threaded Mode Threaded  Previous topic Previous  View all topics Index  Next topic Next 

Similar ThreadsPosterViewsRepliesLast post
* Martha Information wanted Helge 931 4 03/18/05 05:21 PM
by Roadkill
* keeping my martha cool? rammbler 675 10 05/23/05 10:51 PM
by rammbler
* The Mega-Martha Five Million
( 1 2 all )		 Scemilope 301 24 10/05/26 11:46 PM
by Scemilope
* Insulating a Martha in a cold room Smushroom 2,138 3 11/16/12 04:37 AM
by TheEaglesGift
* Martha set-up questions...
( 1 2 3 all )		 o0brandnewcolony 5,613 58 05/08/05 01:15 AM
by HippieChick
* ulra sonic for martha Machmood 2,246 13 03/30/05 12:12 AM
by mushroommark
* Humidity and temp?Martha stewart set up rezzan1 2,174 12 09/24/04 09:16 PM
by rezzan1
* which is quieter martha or pmp?/covert grower Shnezbit 777 5 03/31/05 09:07 PM
by Shnezbit

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
182 topic views. 8 members, 207 guests and 134 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.033 seconds spending 0.01 seconds on 16 queries.