veda_sticks said:

If it can wrap it in a damp towel and adjust to read 99%.

---

I did calibrate it just as you said
In fact, in the OP you can see it's at ~99% now...
It had trouble holding HIGH humidity (drops to
~80% at night when I did not mist for 6+ hours).
This was only in the beginning of fruiting,
where I "misted little" because there was enough water on my subs. Didn't want pools.

That being said, my SGFC is constructed properly,
just may not be placed in an ideal location
(blame it on small, confined living space).

Also, I did not wrap my whole FC with bubblewrap,
you're right LeopardMan, that would be a mistake,
and would require a lot of bubblewrap. I cut portions
and put it on the sub. After pins formed, I ditched it.

Either way, keep in mind anyone who is reading this that SGFC
works due to many factors, not just proper construction. Airflow,
placement, and the substrate/fruiting body within, etc...

Jessel said:

Also, I did not wrap my whole FC with bubblewrap,
you're right LeopardMan, that would be a mistake,
and would require a lot of bubblewrap. I cut portions
and put it on the sub. After pins formed, I ditched it.

---

I see, that's another story

LeopardMan said:

Jessel said:

Also, I did not wrap my whole FC with bubblewrap,
you're right LeopardMan, that would be a mistake,
and would require a lot of bubblewrap. I cut portions
and put it on the sub. After pins formed, I ditched it.

---

I see, that's another story

---