Home | Community | Message Board

Kratom Eye
This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: Unfolding Nature Unfolding Nature: Being in the Implicate Order   Sporeworks.EU Spores for European Microscopy   Myyco.com Isolated Cubensis Liquid Culture For Sale   Mushroom-Hut Substrate Mix   Original Sensible Seeds Bulk Cannabis Seeds   North Spore Injection Grain Bag

Jump to first unread post Pages: 1
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
PF tek tyvek experiences
    #12835954 -

I used one layer of tyvek on top of the lids on my first grow but half of them stalled, no contaminations however. the second time I decided to remove the lid (done in my glovebox) and simply replace it with a layer of tyvek, this actually worked very well.

however in my last grow I have dealt with trich making my grow area a little scarier. i also used LC isolates in my last grow and i'm using MS now. I did the same thing as before(one layer of tyvek instead of lid) and i'm worried they'll get contaminated. however I heard using 3 layers gives barely any air exchange, so should I use 2 next time or is it still too much? will using just one be fine? anyone have experiences with this?


--------------------

Edited by skaterickets (07/01/10 08:47 PM)

Extras: Filter Print Post Top
Re: tyvek experiences [Re: skaterickets]
    #12835963 -

I always use 1 layer of tyvek and a lid.  My lid usually has 2-3 holes about 1/8 of an inch in size.  Never get any stalled jars.

Extras: Filter Print Post Top
Re: tyvek experiences [Re: Damion5050]
    #12836002 -

same all mine are 4 holes. i keep them in my TiT incubator with the lid on top but not closed, do you maybe have yours somewhere pretty open?

and sorry to bother you but now that i got a TC in here :awesome: what's your opinion on tyvek and no lid?


--------------------

Extras: Filter Print Post Top
Re: tyvek experiences [Re: skaterickets]
    #12836006 -

No idea I have never tried tyvek without a lid :shrug: but the TiT is probably your problem, they are junk and are not needed all my jars colonize at room temp.

Extras: Filter Print Post Top
Re: tyvek experiences [Re: Damion5050]
    #12836026 -

haha i saw that coming. yes they probably are junk but my house is cold most of the time so it cuts germination/colonization by a bunch. i'll give it a shot though, thanks for your help!


--------------------

Extras: Filter Print Post Top
Re: tyvek experiences [Re: skaterickets]
    #12836106 -

I dont see why you would need tyvek on your pf's. I use tyvek on my grain jars. Four nail holes covered by a 1.5x1.5 square single layer taped over them

Extras: Filter Print Post Top
Re: tyvek experiences [Re: SomeGuy]
    #12836120 -



i just dont like messing or relying on the verm filter. i know the verm layer should be good enough, but i just dont like it.


--------------------
TO ALL CULTIVATORS, EVERYTHING YOU NEED TO KNOW http://www.shroomery.org/forums/showflat.php/Number/10899385
We need more member like mycochef, he is truly a kind giving person. Just ask Noobie, mycochef hooked him up big time!
Fastest Cultivation WINNER!!!! NoOneKnowsHowToAct won it twice, must be doing something right:super:

Shoot me a pm if you would like a powerful custom laser built. :smile: 4th pic is a 1.3W 445nm laser burning thru some plastic makeup containers. Yes I was wearing proper safety goggles, otherwise I would be blind right now.

Extras: Filter Print Post Top
Re: tyvek experiences [Re: TacoHerder]
    #12836207 -

I do that with coffee filters, to keep the flies out:awesomenod:

Extras: Filter Print Post Top
Re: tyvek experiences [Re: SomeGuy]
    #12837220 -

I found that just Tyvek or coffee filters dried out my cakes and stalled my myc. So I have to do a tyvek with a metal lid underneath to keep the cake from drying out.

Extras: Filter Print Post Top
Re: tyvek experiences [Re: The White Rabbit]
    #12837329 -

well ofcourse you have to use the metal lid no matter what filter you use.


--------------------
TO ALL CULTIVATORS, EVERYTHING YOU NEED TO KNOW http://www.shroomery.org/forums/showflat.php/Number/10899385
We need more member like mycochef, he is truly a kind giving person. Just ask Noobie, mycochef hooked him up big time!
Fastest Cultivation WINNER!!!! NoOneKnowsHowToAct won it twice, must be doing something right:super:

Shoot me a pm if you would like a powerful custom laser built. :smile: 4th pic is a 1.3W 445nm laser burning thru some plastic makeup containers. Yes I was wearing proper safety goggles, otherwise I would be blind right now.

Extras: Filter Print Post Top
Re: tyvek experiences [Re: TacoHerder]
    #12837380 -

metal lid + hole in the middle + ball of polyfill  for me.


it looks like any filter works.


--------------------
   

Extras: Filter Print Post Top
Re: tyvek experiences [Re: SomeGuy]
    #12837644 -

skaterickets said:
I used one layer of tyvek on top of the lids on my first grow but half of them stalled, no contaminations however. the second time I decided to remove the lid (done in my glovebox) and simply replace it with a layer of tyvek, this actually worked very well.

however in my last grow I have dealt with trich making my grow area a little scarier. i also used LC isolates in my last grow and i'm using MS now. I did the same thing as before(one layer of tyvek instead of lid) and i'm worried they'll get contaminated. however I heard using 3 layers gives barely any air exchange, so should I use 2 next time or is it still too much? will using just one be fine? anyone have experiences with this?



Your tyvek became pore less during pressure sterilization.
Inferior tyvek will become heat fused together.
Due to the intense heat of the pressure cooker.

Tyvek painter suits cut into squares will have to be replaced.
Every other time pressure sterilized.

Medical grade tyvek will last a life time.
Capable of being pressure sterilized repeatedly.

For gas exchange filters of tyvek and micropore tape.
Place 2 layers of filer material over a quarter inch hole.

I use a paper hole punch to install holes on metal lids.



Then place filter material over the hole in this order.

Tyvek.
Micropore tape.
Tyvek.
Micropore tape.

Use RTV silicone sealant over second hole.
For self healing injection port.



MD stand for malt dextrose.
paducahovoids said:
I dont see why you would need tyvek on your pf's. I use tyvek on my grain jars. Four nail holes covered by a 1.5x1.5 square single layer taped over them



As stated earlier.
Lids with filters for gas exchange constructed and installed.
Replace the need for the vermiculite barrier as a contaminate resistor.

Also, using lids with gas exchange filters installed and no vermiculite barrier.
Enables Psilocybe Fannaticus cakes to be inoculated with agar wedges.


--------------------
     
How I Get Stuff done. - My Reference Guide. - My Grows.

Extras: Filter Print Post Top
Re: tyvek experiences [Re: hamloaf]
    #12838293 -

ah thanks hamloaf that's awesome info, +5

so i guess since its been through the PC a few times the worse is it'll actually take longer to colonize maybe. i did use a dry verm layer also so that should help even more against contams

also i'm using pf so i'm not sure how the lid idea would work, but maybe a hole in the middle i'll definitely try out a few jars like that next time


--------------------

Extras: Filter Print Post Top
Re: tyvek experiences [Re: skaterickets]
    #12838355 -

skaterickets said:
ah thanks hamloaf that's awesome info, +5

so i guess since its been through the PC a few times the worse is it'll actually take longer to colonize maybe. i did use a dry verm layer also so that should help even more against contams

also i'm using pf so i'm not sure how the lid idea would work, but maybe a hole in the middle i'll definitely try out a few jars like that next time



No.

Since it has been through the PC a few times.
It no longer allows for gases to exchange.

Stalling your mycelial growth.
Completely stopping it.

The intense heat of the PC fuses regular tyvek together into a solid.
No longer allowing for gases to exchange.

After filter material has been through the PC twice.
Replace with new filter material.:thumbup:


--------------------
     
How I Get Stuff done. - My Reference Guide. - My Grows.

Extras: Filter Print Post Top
Re: tyvek experiences [Re: hamloaf]
    #12838585 -

sooo.....priority mail envelopes...2 pc'ings? No Pc'ings?

Extras: Filter Print Post Top
Re: tyvek experiences [Re: hamloaf]
    #12838700 -

hm okay then...
I don't PC brf jars btw, normal pot with cover for 1.5-2hrs if it makes a difference

paducahovoids said:
sooo.....priority mail envelopes...2 pc'ings? No Pc'ings?



yeah if you're using the mail envelopes like me I think he means just PC once/twice and don't re-use them. but also as mentioned before the better quality tyvek(medical etc.) can be re-used several times. i think i may just start using the filters from mycosupply now lol


--------------------

Extras: Filter Print Post Top
Re: tyvek experiences [Re: skaterickets]
    #12838707 -

I think it would make a diff beacause water boils at @220f, but at 15 psi water boils at 250f

Extras: Filter Print Post Top
Re: tyvek experiences [Re: SomeGuy]
    #12838713 -

paducahovoids said:
I think it would make a diff beacause water boils at @220f, but at 15 psi water boils at 250f




Water boils at 212° F at sea level.And in a PC the water boils at 250° F at 15 PSI.


--------------------
7 days without waves makes one weak!

Edited by Mad_Hatter2004 (07/02/10 09:04 AM)

Extras: Filter Print Post Top
Re: tyvek experiences [Re: Mad_Hatter2004]
    #12838720 -

I stand corrected. I think you get my point, though

Extras: Filter Print Post Top
Re: tyvek experiences [Re: skaterickets]
    #12838931 -

skaterickets said:
what's your opinion on tyvek and no lid?



Very bad idea for two reasons. 

One, it will dry out your jars. 

Two, the added air exchange will encourage invitro pinning before full colonization.  You want a high CO2 level during colonization, which requires a lid with four small holes, no larger than 1/8"/3mm in diameter.
RR


--------------------
Download Let's Grow Mushrooms



semper in excretia sumus solim profundum variat

"I've never had a failed experiment.  I've only discovered 10,000 methods which do not work."
Thomas Edison

Extras: Filter Print Post Top
Jump to top Pages: 1

Shop: Unfolding Nature Unfolding Nature: Being in the Implicate Order   Sporeworks.EU Spores for European Microscopy   Myyco.com Isolated Cubensis Liquid Culture For Sale   Mushroom-Hut Substrate Mix   Original Sensible Seeds Bulk Cannabis Seeds   North Spore Injection Grain Bag


Similar ThreadsPosterViewsRepliesLast post
* Tyvek Envelopes/ Filter disks? fidget 3,198 10 06/20/02 12:08 PM
by OCMsurfer
* tyvek envelopes!!! Psilocybeingzz 2,296 5 09/21/03 02:51 AM
by Demiurge
* what and where the fuck is tyvek??? Anonymous 1,190 7 09/27/25 09:32 PM
by hamloaf
* I need Tyvek MrSleep 1,136 18 06/03/03 02:32 PM
by Mordor
* f
( 1 2 all )
CrabbyAss 4,904 36 08/17/03 02:17 PM
by OJK
* Micropore tape. The least sticky tape of them all. Ziran 1,805 14 03/05/18 10:46 PM
by pacmanbreed
* TYVEK BLUES.... YellowSubmarine 950 9 04/05/03 05:50 AM
by si1988crx
* Tyvek Envelopes + desiccant NFNF 1,149 2 06/02/03 06:05 PM
by apuffball

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: DERRAYLD, Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
3,287 topic views. 5 members, 345 guests and 116 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.04 seconds spending 0.006 seconds on 16 queries.