Home | Community | Message Board


This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: MagicBag.co Certified Organic All-In-One Grow Bags   Original Sensible Seeds Bulk Cannabis Seeds   North Spore Bulk Substrate   Mushroom-Hut Substrate Mix   Sporeworks.EU Spores for European Microscopy

Jump to first unread post Pages: 1
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
question about mono-tub and moisture content
    #6434573 -

this is my second stab at mush cult and I ran into some problems in the first grow that I may be able to fix with some minor changes. I used a mono tub setup, I did some manual intervention ie. fanning, and a bit of misting and i have a hunch that this led to allot of premature shrooms. I did some reading and I found out that the moisture content has direct correlation to when the mushroom mature and looses its veil. I was wondering if by me opening and closing the mono tub led to this outcome. Does anyone know if i can hook you hook a vaporizer up to the top of the mono tub and run it 24/7 that this may help me to grow larger mushrooms.

Extras: Filter Print Post Top
Re: question about mono-tub and moisture content [Re: jcee]
    #6434578 -

the idea of a monotub is to open it to spawn, open to case, and open to harvest, thats all.


--------------------
----------


Extras: Filter Print Post Top
Re: question about mono-tub and moisture content [Re: odium33]
    #6434624 -

ya, I thought that a litle intervetion couldnt hurt. I guess ill try it that way

Extras: Filter Print Post Top
Re: question about mono-t varia withtub and moisture content [Re: jcee]
    #6435289 -

can anyone say would it be benificial to add a vap to the the monotub. say like a monotub variation

Extras: Filter Print Post Top
Re: question about mono-t varia withtub and moisture content [Re: jcee]
    #6435311 -

Nah your best bet is to just leave it alone the mono tub does all the work. Fanning not needed.

Extras: Filter Print Post Top
Re: question about mono-t varia withtub and moisture content [Re: jcee]
    #6435434 -

it's a set it and forget it kind of thing
get all the moisture levels right first off and you won't have to worry about a thing :grin:

Extras: Filter Print Post Top
Re: question about mono-t varia withtub and moisture content [Re: jcee]
    #6436092 -

jcee said:
can anyone say would it be benificial to add a vap to the the monotub. say like a monotub variation



if you have a humidifier hooked up to it, it is not really a monotub anymore, and i would reserve humidifiers for tent style fruiting chambers, like greenhouses and marthas


--------------------
----------


Extras: Filter Print Post Top
Re: question about mono-t varia withtub and moisture content [Re: odium33]
    #6436142 -

here is just something that is in the grow log forum...i used something like it back in the day...worked pretty well here...

Rahz said:
This project is still evolving, but I will probably leave things as is until the current casings have flushed out.



Metal shelf with tubs: Tubs have CO2 vents near the bottom and exhaust filter on opposite side of intake. I haven't taped the lids, so the exhaust is basically useless at this point. I just felt that having ventalation around the top of the tub was a good idea for now.

Ultrasonic: no mods necessary to the ultrasonic. I found a tapered cup that fit in the ultrasonic's port, cut it down, fitted it with a rubber doughnut, and added the PVC, glued with PVC cement. Unit is hooked to a VARIABLE timer switch (costs $80) so I can dial in whatever ammount of moisture is needed.

Ultrasonic mist delivery: each branch of the PVC tube ends with a 45% elbow and a cap. Each cap has an exhaust hole drilled in it. Hole size increases on each higher branch. Otherwise, the bottom tub would get drenched and the top tub would be kinda dry. I was able to get visual equality from the ports by simply switching out caps until everything was close. Then I hooked the rig up and ran it full blast for several hours. This resulted in plenty of condensation forming in the tubs, which I was able to measure. Taking this data, I used a dremel to adjust the exhaust holes, repeating the procedure until each tub was generating the same ammount of condensation.

Cool-mist: The cool mist is under more pressure than is healthy for it. It will burn out eventually, but I think it will easily last through this grow. Tube size and length was adjusted until I was providing 6 air exchanges (dry air, no water in the cool mist) per hour to each tub. Next grow... the cool mist is gone. This is the new BIG idea. If I can provide additional humidity to a monotub type grow, I can increase the poly-hole size/count to provide additional air exchange and won't need the cool mist. Polyfill holes would hold a lot of moisture however. So instead of using polyfil, I'll be using Merv12 filter material.

BIG air exchange, plenty of moisture, only the ultrasonic to worry about. Water only needs to be changed once a week for sanitary purposes. In short, once I'm done modifying, this system will provide the ease of monotubs with the additional moisture/air exchange that a martha type environment can provide.

I'll be updating, but won't be writing a full grow log/how to until mods are done on the next grow. The main reason I'm writing this now... My trays are knotting!!! This will be my biggest harvest to date... unless something goes wrong. Over 12 gallons of substrate, around 8 square feet of surface area knotting like crazy :crazy2: :grin: :mushroom2:



Extras: Filter Print Post Top
Jump to top Pages: 1

Shop: MagicBag.co Certified Organic All-In-One Grow Bags   Original Sensible Seeds Bulk Cannabis Seeds   North Spore Bulk Substrate   Mushroom-Hut Substrate Mix   Sporeworks.EU Spores for European Microscopy


Similar ThreadsPosterViewsRepliesLast post
* Rye Grain Moisture Content debianlinux 9,827 15 01/03/03 10:32 AM
by On_the_Down-Low
* Rye grain ratio question, using less water Visigoth 1,869 2 10/20/02 07:25 PM
by Alkaloids
* substrate moisture question Hollywood 1,958 1 12/05/01 09:34 AM
by puscle
* DB 10 LB KIT QUESTION Wisdom to gain 1,361 9 07/23/01 12:18 AM
by badjessejames
* Post deleted by users_request malibu76 780 3 06/21/02 06:23 AM
by the_Landotter
* Ok heres the question......
( 1 2 all )
Rabbitt 2,460 21 11/26/02 02:12 AM
by Rabbitt
* Grain questions? resin 1,182 9 12/03/02 02:52 PM
by TheFungusAmongUs
* rye question dog 765 7 01/20/03 08:33 PM
by Torey

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: DERRAYLD, Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
1,466 topic views. 9 members, 459 guests and 220 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.026 seconds spending 0.006 seconds on 16 queries.