|
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
EaTmEKiDs
journeyman

Registered: 10/23/01
Posts: 89
Last seen: 21 years, 3 months
|
Can I Have Some Insight?
#511390 - 01/05/02 07:07 PM (21 years, 11 months ago) |
|
|
OK, listen to this and tell me what u think! I bought the Magic Soulfood Machine from http://www.mushroommagic.com/sfm.htm. Now the machine is inside of the glovebox that is 45 gal (abt 3ft x 2ft). The lid is a regular lid to the box that i cut a 6in x 12in sqaure in, and put a piece of thick ass plastic (pallet wrap). Now the box itself has a computer fan with a soda bottle covering it and sealed off with silicon glue. At the spout of the bottle i put a piece of bio filter doused in H2O2 (Hydrogen Peroxide) to make sure the air flow was clean coming into the glovebox. now i have another hole directly on the oppositte side of the fan for the air to escape, but i also coverd that with a bio filter. For the arms holes i used pvc connecting pipe pieces. Now connected to the arm holes i have the flexible air duct pipes that u usually have in ur house. At the end of the flex pipe i have nice thick rubber gloves attached securely. OK, inside the glovebox is the souldfood machine (16in x 16in). For the souldfood machine i did exactly what they told me to do in the instructions. I sterlized everything in oven bags. at the bottom of the soulfood machine i have perlite, then i have the grow media on top of that. I injected it with the subsrate and then put the lid of the soulfood machine back on. The lid has many holes in it so i wasn't too sure abt it so thats what made me decide to make the glovebox. I'll take pics tomorrow to post up here and show everyone. I just feel like i'm missen something so i'd thought i'd ask the best and thats why i'm here! So PLZ!!!!! give me ur insight and tell me if i am missen anything or if i should improve on anything. THX FOR THE HELP GUYS!!!! P.S. Always wear a smile!!!
-------------------- ?{???}? Heres lookin at you kid!
|
DinoMyc
Ipsa scientiapotestas est
Registered: 11/13/99
Posts: 1,080
Last seen: 17 years, 5 months
|
Re: Can I Have Some Insight? [Re: EaTmEKiDs]
#511479 - 01/05/02 08:28 PM (21 years, 11 months ago) |
|
|
you wont find much of a reply here.. this is for advanced questions and discussions.. if your a beginner you should first read ggmm and/or tmc, all the faq's here, and grow for a while before you try to do something like this. it sounds like you completely misunderstood what your supposed to do with this.. you innoculated a container with a large number of holes, and your trying to set it up like a glovebox??.....
-------------------- If I made affront, I apologize. If I made affirmation, I apologize. I merely came to listen, came to say.
|
EaTmEKiDs
journeyman

Registered: 10/23/01
Posts: 89
Last seen: 21 years, 3 months
|
Re: Can I Have Some Insight? [Re: DinoMyc]
#511484 - 01/05/02 08:32 PM (21 years, 11 months ago) |
|
|
maybe u should try readin my post again cause it really sounds like u misunderstood what i was saying i built a glovebox and inside that glovebox i have my souldfood machine. i described my glovebox so that u would know what i'm talkin abt. i'll put pics up tomorrow so u can seee what i'm talkin abt.
-------------------- ?{???}? Heres lookin at you kid!
|
DinoMyc
Ipsa scientiapotestas est
Registered: 11/13/99
Posts: 1,080
Last seen: 17 years, 5 months
|
Re: Can I Have Some Insight? [Re: EaTmEKiDs]
#511976 - 01/06/02 07:58 AM (21 years, 11 months ago) |
|
|
why would you do that though? I understood what you were saying, although i missed part of it (your free form was a bit hard to follow).. and why would you get a soul food machine?... perhaps with pics i can better understand what you mean..
-------------------- If I made affront, I apologize. If I made affirmation, I apologize. I merely came to listen, came to say.
|
EaTmEKiDs
journeyman

Registered: 10/23/01
Posts: 89
Last seen: 21 years, 3 months
|
Re: Can I Have Some Insight? [Re: DinoMyc]
#512143 - 01/06/02 02:06 PM (21 years, 11 months ago) |
|
|
here r those pics i was talkin abt i'll make a new post in case ya guys don't read this one
armholes
the fan sux air in thru this filter (bio disc)
 this is direct opposite of the fan to let air out
arm holes sealed inside
gloves atteched to the flex tube for full arm movement
top window view of the glovebow with the soulfood machine inside
this is the soulfood machine inside the glovebox now what u think?
-------------------- ?{???}? Heres lookin at you kid!
|
Richard_D_James
enthusiast
Registered: 04/27/01
Posts: 242
Last seen: 15 years, 2 months
|
Re: Can I Have Some Insight? [Re: EaTmEKiDs]
#512146 - 01/06/02 02:10 PM (21 years, 11 months ago) |
|
|
i thought the purpose of a glovebox was to MINIMIZE air currents. Why do so many people want air exchange in their glovebox?
|
Tlaloc
member
Registered: 05/03/01
Posts: 102
Last seen: 21 years, 8 months
|
|
glove box and flow hood are 2 different things. People confuse this and make a hybrid. Looks like a lot of work, hope it helps u man! Good job.
-------------------- [blue] Bill Hicks (1961-1994) "SQUEEGIE YOUR THIRD EYE! "
|
|