Home | Community | Message Board

Kratom Eye
This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: North Spore Cultivation Supplies   Myyco.com Golden Teacher Liquid Culture For Sale

Jump to first unread post Pages: | 1 | 2  [ show all ]
Re: Industrial Plug - 32A Circular Saw [Re: trendal]
    #13843457 -

that is what I thought and if its a motor like that I thought it might not work. I know very little about a voltage converter along the lines of making something like that work but have experience taking factory units built for use here in the usa and changing them over for use in other countries. Changing out the motors to 50hz capable was one of the things we did for some stuff as the higher efficiency motors where only 60 not 50/60 duty.

Can OP read off the whole tag or get a good model number and maybe a DIY option can be confuckeled.


--------------------

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: trendal]
    #13843465 -

trendal said:
argg said:
is this saw ok on 50 hertz? will the transformer convert that too? it might be cheaper to get a new saw over converting it.



AFAIK, there's no way to convert the frequency using just a transformer.



Sure there is!  Thats what an AC/DC transformer does - it converts the frequency to zero.  :grin:

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: DieCommie]
    #13843522 -

DieCommie said:
trendal said:
AFAIK, there's no way to convert the frequency using just a transformer.



Sure there is!  Thats what an AC/DC transformer does - it converts the frequency to zero.  :grin:



Please explain what an "AC/DC transformer" is... :wink:

I am sure you meant to say rectifier, which is something entirely different from a transformer.


--------------------
Once, men turned their thinking over to machines in the hope that this would set them free.
But that only permitted other men with machines to enslave them.

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: trendal]
    #13843530 -

The "transformer" has a rectifier in it...  :uhoh:

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: trendal]
    #13843532 -

lol you said rectifier.


--------------------

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: trendal]
    #13846161 -

> Please explain what an "AC/DC transformer" is... :wink:

It is the system used to transform AC into DC before rectifiers were invented.  The common name is "rotary converter".  Their use died out in the early 1900's when vacuum tube rectifiers became available.  They should be covered in any EE Power Electronics course.


--------------------
Just another spore in the wind.

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: blurt]
    #13846325 -

> Turns out that the saw is - 110Vac 13A 50-60hz 1400w. Now how do I deal with the 110Vac?

Most motors that are 50-60hz compatible are wound to work with 110Vac and 220Vac with minor modifications at the factory.  This is done to save manufacturing costs as a single stator can simply be connected slightly differently for all major markets. Assuming this is the case with your motor, you need to rewire (not rewind) the stator from series to parallel or parallel to series to change the operating voltage.  Although fairly simple to do, this is not easy to explain.  Find somebody that works on electric motors to help you.


--------------------
Just another spore in the wind.

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: Seuss]
    #13846356 -

Seuss said:
> Please explain what an "AC/DC transformer" is... :wink:

It is the system used to transform AC into DC before rectifiers were invented.  The common name is "rotary converter".  Their use died out in the early 1900's when vacuum tube rectifiers became available.  They should be covered in any EE Power Electronics course.



I'm not sure I'd call that any kind of transformer...?

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: ChuangTzu]
    #13846406 -

> I'm not sure I'd call that any kind of transformer...?

If I remember correctly, it is considered a subclass of a rotary transformer.  However, power electronics was almost two decades ago, and wasn't one of my stronger classes, so I might not be remembering correctly.  :smile:


--------------------
Just another spore in the wind.

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: trendal]
    #13852153 -

This saw is rated at 50hz so thats fine. I may end up getting a site transformer http://www.diytools.co.uk/diy/Main/sp-2-6984-52615-carroll-%26-meynell-3300-2-twin-outlet-transformer-3.3-kva.asp

I will most likely end up with more equipment rated at 110v so its not much of a loss.

Extras: Filter Print Post Top
Jump to top Pages: | 1 | 2  [ show all ]

Shop: North Spore Cultivation Supplies   Myyco.com Golden Teacher Liquid Culture For Sale


Similar ThreadsPosterViewsRepliesLast post
* transformer output question *DELETED* eric_the_red 1,008 4 06/27/03 05:31 PM
by trendal
* Transformer Overflow LittleBen 806 4 08/10/05 02:17 PM
by trendal
* Neon sign transformers trendalM 2,642 12 01/05/06 01:45 AM
by LouiseLouise
* Fixing headphone plug Chazzersize 3,863 2 07/30/07 12:41 AM
by Chazzersize
* Laptops with non-integrated power plug SeussA 768 4 02/22/08 05:10 AM
by ohmatic
* i have some extra ram, do i just plug it into my computer? agoutihead 978 12 07/12/07 12:45 AM
by Rustifer
* Möbius transformations Revealed kake 497 1 11/23/07 02:01 AM
by kake
* plug in CPU fan the man 1,310 11 06/26/03 03:13 AM
by the man

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: trendal, automan, Northerner
1,727 topic views. 0 members, 2 guests and 9 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.026 seconds spending 0.007 seconds on 15 queries.