Home | Community | Message Board

Sporeworks
This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Myyco.com Shop: Golden Teacher Liquid Culture For Sale

Jump to first unread post Pages: 1 | 2 |  [ show all ]
Industrial Plug - 32A Circular Saw
    #13784620 -

Hi guys, after googling I couldn't findwhat I need sohere I am. I want to connect an industrial plug to  a regular socket, what do I need? Or could I just replace the plug with a regular plug? I wantedto  ask cause the last time I replaced a plug onto something with a non-regular plug it blew £35 of bulbs :-(

http://upload.wikimedia.org/wikipedia/commons/thumb/4/42/16A-plug.jpg/150px-16A-plug.jpg

Edited by blurt (01/14/11 06:48 AM)

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: blurt] * 1
    #13784723 -

What is the power of that saw? 32A and 110 V?
What fuses are on the wires you will connect it to?

There is a reason they put a special plug on those machines.

Edited by Annom (01/14/11 07:47 AM)

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: blurt]
    #13784732 -

In North America, the standard current available to a wall outlet is only 15A. You might find some 20A circuits in newer homes.

It sounds like you are in England, correct?

I'm pretty sure most household plugs will only do around 15A, over there. You may be able to hook it up to a plug for a kitchen stove...but you would have to be careful!


--------------------
Once, men turned their thinking over to machines in the hope that this would set them free.
But that only permitted other men with machines to enslave them.

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: trendal]
    #13785696 -

Yes im in England, AC is 240V with upto 13A and saw is 240V however I need to go and double check the voltage and amperage.

Would you beable to link me to somethings relevent like an adaptor/converter or information (if you know any relevent links)

Edited by blurt (01/14/11 01:28 PM)

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: blurt]
    #13785750 -

The wires may become too hot if you ignore the 13A limit, that's why you have fuses or circuit breakers on those wires.

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: Annom]
    #13785773 -

Im going to go double check the  amperage because I managed to find adaptors but there all for 16A and nothing higher.

http://cgi.ebay.co.uk/PAT-Adapter-13A-Plug-16A-Industrial-socket-/270651211466?pt=UK_BOI_Electrical_Test_Measurement_Equipment_ET&hash=item3f0411beca

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: blurt]
    #13790089 -

You will have to find an outlet that provides greater than 32A of current. There is no adapter that will give you the 32A from your little 13A wall socket.

Now the best thing to do here is to actually have a new outlet wired in to your house. It will have to have some thick wires! At least 8 gauge (your probably looking for a "8-3 wire").


--------------------
Once, men turned their thinking over to machines in the hope that this would set them free.
But that only permitted other men with machines to enslave them.

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: trendal]
    #13795268 -

Just check what kW the circular saw is. Doubt its gonna be pulling 32A constantly. That's 7.7kW. Unless its some sort of big arse table saw. The plug was probably put on there due to where it was being used previously...

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: CaMo]
    #13802854 -

Quote:
Just check what kW the circular saw is



That's the key.  If it actually draws 32 amps, you'll need a 40 amp circuit.  If you have an electric stove or clothes dryer, that's probably the correct wire and breaker size.  If it's a hand held circular saw, I doubt it draws any where near that much juice.  Post a picture of the data plate on the saw if you're not sure.
RR


--------------------
Download Let's Grow Mushrooms



semper in excretia sumus solim profundum variat

"I've never had a failed experiment.  I've only discovered 10,000 methods which do not work."
Thomas Edison

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: RogerRabbit]
    #13804186 -

> Yes im in England, AC is 240V

Actually, nominal domestic AC in England is supposed to be 230VAC (rms) since 1995 (before that it was 240VAC +/- 6%).  The supply voltage is still 240VAC due to the acceptable tolerances (230VAC +10%/-6%) and the stubbornness/costs associated with changing to meet the EU standard.

> I doubt it draws any where near that much juice.

32 amps at 230VAC would be about right for a 5 (to 6) horsepower induction motor given average inefficiencies found in most power tools.

> Just check what kW the circular saw is. Doubt its gonna be pulling 32A constantly.

All that matters is the maximum current draw at continuous use and load, which is said to be 32 amps.  You will exceed 32 amps for a brief period when the motor starts.  You will also exceed 32 amps if the motor stalls.  Beyond that, it is unlikely that you will draw 32 amps continuously, but the motor is capable of doing so, thus your wiring had better be capable of providing that amount of current or you risk a fire, or brownout damage to other electronics on the same circuit.


--------------------
Just another spore in the wind.

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: Seuss]
    #13841140 -

Turns out that the saw is - 110Vac 13A 50-60hz 1400w. Now how do I deal with the 110Vac?

About to google now but always prefer a direct answer from experience.

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: blurt]
    #13841148 -

blurt said:
Turns out that the saw is - 110Vac 13A 50-60hz 1400w. Now how do I deal with the 110Vac?

About to google now but always prefer a direct answer from experience.




Really I need the cheapest option not £35 on a step-down transformer.

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: blurt]
    #13841199 -

A step-down transformer would be the only option, in your case. It's really the cheapest way to bring the voltage down.


--------------------
Once, men turned their thinking over to machines in the hope that this would set them free.
But that only permitted other men with machines to enslave them.

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: trendal]
    #13841388 -

What happens when you plug a 110 V machine in 220 V? I never had any problems doing it the other way around, without transformer.

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: Annom]
    #13841430 -

I managed to find some cheap transformers. But whats the difference between a 45w step-down transformer and 100w step-down transformer and so on?

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: blurt] * 1
    #13841603 -

blurt said:
I managed to find some cheap transformers. But whats the difference between a 45w step-down transformer and 100w step-down transformer and so on?



55 watts


--------------------

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: blurt]
    #13841655 -

Your saw is rated at 1400w, so you'll need a transformer rated at least as high.

You should go second hand, especially if your worried about cost.


--------------------
Once, men turned their thinking over to machines in the hope that this would set them free.
But that only permitted other men with machines to enslave them.

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: argg]
    #13841786 -

argg said:
blurt said:
I managed to find some cheap transformers. But whats the difference between a 45w step-down transformer and 100w step-down transformer and so on?



55 watts



Smarts ares, lol.

And what!!! Seriously.... Oh dear.

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: blurt]
    #13841854 -

is this saw ok on 50 hertz? will the transformer convert that too? it might be cheaper to get a new saw over converting it.


--------------------

Extras: Filter Print Post Top
Re: Industrial Plug - 32A Circular Saw [Re: argg]
    #13843241 -

argg said:
is this saw ok on 50 hertz? will the transformer convert that too? it might be cheaper to get a new saw over converting it.



AFAIK, there's no way to convert the frequency using just a transformer.


--------------------
Once, men turned their thinking over to machines in the hope that this would set them free.
But that only permitted other men with machines to enslave them.

Extras: Filter Print Post Top
Jump to top Pages: 1 | 2 |  [ show all ]

Myyco.com Shop: Golden Teacher Liquid Culture For Sale


Similar ThreadsPosterViewsRepliesLast post
* transformer output question *DELETED* eric_the_red 1,008 4 06/27/03 05:31 PM
by trendal
* Transformer Overflow LittleBen 806 4 08/10/05 02:17 PM
by trendal
* Neon sign transformers trendalM 2,642 12 01/05/06 01:45 AM
by LouiseLouise
* Fixing headphone plug Chazzersize 3,863 2 07/30/07 12:41 AM
by Chazzersize
* Laptops with non-integrated power plug SeussA 768 4 02/22/08 05:10 AM
by ohmatic
* i have some extra ram, do i just plug it into my computer? agoutihead 978 12 07/12/07 12:45 AM
by Rustifer
* Möbius transformations Revealed kake 497 1 11/23/07 02:01 AM
by kake
* plug in CPU fan the man 1,310 11 06/26/03 03:13 AM
by the man

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: trendal, automan, Northerner
1,727 topic views. 0 members, 13 guests and 5 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.034 seconds spending 0.01 seconds on 18 queries.