Home | Community | Message Board


This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: North Spore Bulk Substrate   Mushroom-Hut Substrate Mix   Original Sensible Seeds Bulk Cannabis Seeds   MagicBag.co Certified Organic All-In-One Grow Bags

Jump to first unread post Pages: 1
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
Ghetto-cheap multi-probe thermometer (infinite probes)
    #18554434 -

Do you want to measure more than just one spot? Interested in temperatures at different heights and air temp vs substrate temp vs liquid temp? You need a multi-probe thermometer. Temperature probes are simply a cheap component called a Thermistor. They cost around a dollar or less.

A thermistor is a resistor that that changes resistance value with temperature. Reading this resistance value with a multimeter we can evaluate the temperature of the probe.

Parts:
1x Normal thermometer(for calibration)
1x Multimeter
2x Wires with crocodile-clips on each end
As many thermistors as you want probes, and wire to use as their leads.



Simply make your probes by attaching a piece of wire to each Thermistor leg, and insulate the exposed wire(hot glue/electrical tape/shrink tube) if it is going to go into a wet environment or in substrate.

Calibrate your thermistor probe by placing in water alongside your normal thermometer, then measure and record the resistance with the multimeter at different temperatures. You can plot your temperature/resistance measurements on a graph to produce a curve for easy reference. Thermistors of the same type can vary in response from each other by as much as 10%, so you may want to calibrate each probe if you are after high precision.

If you wanted to get fancier you could add a rotary switch with each probe hooked up to a pole. Then you only need to clip the multimeter onto the switch, then turn the switch to select the probe you are measuring.


--------------------
Fungi nutrition requirements

Extras: Filter Print Post Top
Re: Ghetto-cheap multi-probe thermometer (infinite probes) [Re: Subspecies]
    #18554596 -

good info!! so wouldnt different sub's give a different resistance, for example.

50% straw, 25% poo, 25% verm would be a different consistency than 40% straw 40% poo and 20% verm. Just sounds like it may throw you reading off a bit unless you mixed your sub exactly the same every time, including amount of water in the sub.


--------------------

Extras: Filter Print Post Top
Re: Ghetto-cheap multi-probe thermometer (infinite probes) [Re: first time expert]
    #18554703 -

The substrate won't make a difference, the same as it wont matter putting it in air or in water. Its the internal resistance of the component itself that is being measured, and this only varies as the component temperature varies. The component head is insulated from the environment.

thermistor images

The leads are exposed, and so must be insulated if used in a conductive medium, or else they may short circuit giving you a resistance reading near 0. Hot glue or shrink wrap will be impervious. You can even epoxy the assembly into a metal-tipped shaft(with the thermistor positioned inside the metal tip) if you want a rugged probe. The thermal conductivity of the epoxy could slow the sensor response time somewhat.

One more thing, its in the diagram, but I forgot to mention, you need an NTC(Negative Temperature Co-efficient) Thermistor, not a PTC. PTC Thermistors are used as overheat protection devices.


--------------------
Fungi nutrition requirements

Extras: Filter Print Post Top
Re: Ghetto-cheap multi-probe thermometer (infinite probes) [Re: Subspecies]
    #18569842 -
Log in to view attachment

I made a spreadsheet which simplifies the calibration and charting of a thermistor probe.

I'll do a proper tute write up when I find a camera, but here is the file for now.

This was made in excel 2010, I have no idea of compatibility with other versions/software sorry.


--------------------
Fungi nutrition requirements

Extras: Filter Print Post Top
Re: Ghetto-cheap multi-probe thermometer (infinite probes) [Re: Subspecies]
    #18570018 -

Quote:
Subspecies said:
One more thing, its in the diagram, but I forgot to mention, you need an NTC(Negative Temperature Co-efficient) Thermistor, not a PTC. PTC Thermistors are used as overheat protection devices.




"K-Type" probably wouldn't work with this diagram either.

I like your idea, and have thought of this myself, but isn't it easier to just move a single probe to a spot you wish to measure?

Do you get a median result if all three were connected simultaneously?

Extras: Filter Print Post Top
Re: Ghetto-cheap multi-probe thermometer (infinite probes) [Re: barong]
    #18570089 -

The K-type just means if it is positive or negative. You want the negative one, but that isn't a problem, they are the common type used in just about all normal(not extreme) temperature range measurements.

Moving a probe can be easier, but it depends on the situation. One example, you could put one of these probes into each of your jars of substrate with the leads poking out(before pressure cooking), to be able to measure core temperatures without contamination.

There are heaps of cheap thermometers on the market, and most people would be served perfectly by them. This is really for the scientists amongst us, who are on a budget. Buying probes for multi-probe commercial units is expensive, and you still need to use the same calibration method (boiling point/freezing point). The accuracy is as good as it gets, you just have to read a chart or punch your resistance reading into a calculator(I will add to the spreadsheet) instead of having your temperature calculated automatically. The ability to build the probes into things can simplify a number of experiments where temp data is needed.

Over a very narrow temperature range, or specifically where the curve is approximately a straight line, you could get a median result by connecting the probes in series and dividing the measurement by the number of probes. But I would just measure each one. If one is out by a large degree it will not linearly scale with the others. I picked up a 12-position rotary switch today so I can hook all my probes up to that and select any of them easily.


--------------------
Fungi nutrition requirements

Extras: Filter Print Post Top
Re: Ghetto-cheap multi-probe thermometer (infinite probes) [Re: Subspecies]
    #18570536 -

If you want to measure in more than one spot, just move your temp probe around :shrug:

But you don't need to.

The exterior substrate should be close to boiling temps while the interior should never exceed 165F for more than a few minutes.

The core doesn't move during pasteurizing, so you can just stick your probe in the center and let it go.


--------------------

Yes, you can bump my old threads with a question.
Here is how I get things done.
You should take a look. :hehehe:


Frank's tips and tricks. Updated on 3/21/14
AMU- Get an answer here -AMU

Extras: Filter Print Post Top
Re: Ghetto-cheap multi-probe thermometer (infinite probes) [Re: FrankHorrigan]
    #18570843 -

Frank, I mean for checking the temperature after cooking. At any time. For example, if you wanted to check the lag between air temperature change and core temperature change. Or the difference in temp at the side of the vessel vs core(multiple probes in same jar). Multiple probes also means no waiting for the sensor to acclimatise between readings. If you have a lot of readings to take, this saves you a lot of time. Depends on your needs. I just made a vacuum pump so I can build a low pressure chamber for my subaeruginosas, so I don't want to be opening that if I can avoid it. Like I said, most people will be happy with a single cheap commercial thermometer. This is for the science heads.


--------------------
Fungi nutrition requirements

Extras: Filter Print Post Top
Re: Ghetto-cheap multi-probe thermometer (infinite probes) [Re: Subspecies]
    #18571029 -

What facet of "science" is this that I am missing?

The science of pasteurizing substrate is such that only one reading needs to be taken and timings / heat considered.

Others can be taken if you desire simply by moving the probe around. This is unnecessary for any kind of substrate pasteurization.

And if you need to take readings from the air temp and such for pasteurizing, you are overthinking this mr "science head." :facepalm:

Pasteurization in bags and jars heat things pretty evenly. No need to go overboard.

As far as air temps, I only need to measure the temp of my fruiting room, not the chambers themselves.

:2cents:


--------------------

Yes, you can bump my old threads with a question.
Here is how I get things done.
You should take a look. :hehehe:


Frank's tips and tricks. Updated on 3/21/14
AMU- Get an answer here -AMU

Edited by FrankHorrigan (07/17/13 01:19 PM)

Extras: Filter Print Post Top
Re: Ghetto-cheap multi-probe thermometer (infinite probes) [Re: FrankHorrigan]
    #18571334 -

Quote:
What facet of "science" is this that I am missing?



I guess the part where you are a science geek and you love hypothesising and experimenting. I don't mean that you fail to understand science. I mean it in the sense of the pursuit of knowledge for its own sake.

Not trying to be rude!

You are also misreading or misinterpreting the rest of what I am saying. This has nothing to do with the science of pasteurisation. I only mentioned in the example that you would put it in the jar before cooking because to add it after would introduce contaminants. It was simply an example of where it could be used that a regular thermometer could not. Practicality of the example to another user is irrelevant. If you can't think of a use for this, then you don't need it.


--------------------
Fungi nutrition requirements

Extras: Filter Print Post Top
Re: Ghetto-cheap multi-probe thermometer (infinite probes) [Re: Subspecies]
    #18571393 -

Ah, I see what you're saying.

I misread and thought this was primarily for pasteurizing.

My mistake my man :lol:

Sometimes I should wait to post til I have my coffee.

Sorry for getting a little feisty, I felt like you were talking down at me a bit :shrug:


--------------------

Yes, you can bump my old threads with a question.
Here is how I get things done.
You should take a look. :hehehe:


Frank's tips and tricks. Updated on 3/21/14
AMU- Get an answer here -AMU

Extras: Filter Print Post Top
Re: Ghetto-cheap multi-probe thermometer (infinite probes) [Re: FrankHorrigan]
    #18571418 -

No worries Frank, often i'm too blazed to explain myself well :stoned:


--------------------
Fungi nutrition requirements

Extras: Filter Print Post Top
Re: Ghetto-cheap multi-probe thermometer (infinite probes) [Re: Subspecies]
    #18571488 -

Great info, very cheap way to monitor temperature.  You can get cheap multimeters online for $5.00 then each additional probe for like $0.50 :awethumb:

I could see this being useful for measuring the internal temps of your bulks or jars and make sure that the cores aren't overheating in hot weather. Be nice to see the relation between core temp vs substrate depth.

The thermistors I have are tiny (matchhead sized)  and covered in plastic so they would be great for embedding in a project, were as most commercial thermometer probes are pretty large.  (least the types I see at hardware stores)


--------------------
-------------------------------------------------

-------------------------------------------------

Extras: Filter Print Post Top
Re: Ghetto-cheap multi-probe thermometer (infinite probes) [Re: Subspecies]
    #18571504 -

Subspecies said:
No worries Frank, often i'm too blazed to explain myself well :stoned:



And I'm often too blazed to properly comprehend what I read :volcano:


--------------------

Yes, you can bump my old threads with a question.
Here is how I get things done.
You should take a look. :hehehe:


Frank's tips and tricks. Updated on 3/21/14
AMU- Get an answer here -AMU

Extras: Filter Print Post Top
Jump to top Pages: 1

Shop: North Spore Bulk Substrate   Mushroom-Hut Substrate Mix   Original Sensible Seeds Bulk Cannabis Seeds   MagicBag.co Certified Organic All-In-One Grow Bags


Similar ThreadsPosterViewsRepliesLast post
* Ghetto, cheap and nifty Fruiting Chamber with pics. Psychonaught 1,637 15 01/15/06 09:45 AM
by Psychonaught
* Classic PF tek with 1 pint jars. -- A ghetto grow log. *Picture Update* Delinquentes 9,860 14 03/01/06 11:00 PM
by liloldme
* How do you Test a PH Probe? MasFina 858 13 06/11/06 08:38 AM
by soma_seeker
* Cheap Growin Chamber Anonymous 1,749 8 12/11/02 09:12 AM
by Anonymous
* TiT setup w/ thermometer WoodsCall 1,530 11 12/29/04 09:13 PM
by ChrisHippyLoser
* Accurate(?) Thermo-Hygrometer on the cheap ghostofbmarley 1,741 11 07/15/06 04:46 PM
by HippieChick
* constant failure of cheap digital thermometer/hygrometers Torey 1,166 4 01/13/04 10:44 PM
by OmegaRed
* Which Thermometer/Hygrometer is better? FirstAvailable 1,748 14 03/20/04 04:06 PM
by FirstAvailable

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: DERRAYLD, Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
2,304 topic views. 10 members, 365 guests and 213 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.032 seconds spending 0.006 seconds on 14 queries.