Home | Community | Message Board

MagicBag Grow Bags
This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: Sporeworks.EU Spores for European Microscopy   Original Sensible Seeds Bulk Cannabis Seeds   North Spore Bulk Substrate   Mushroom-Hut Liquid Cultures   MagicBag.co Certified Organic All-In-One Grow Bags

Jump to first unread post Pages: | 1 | 2 | 3 |  [ show all ]
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
Re: Scotts 3n1 in a Pot [Re: Hippie3]
    #862885 -


First off, Very Nice, Hippie!...

In response to: >now i let it sit out and drain a few days before returning it to its' tray.

So you basically Pop the colonized substrate out into a big ass pot of sterile water and dunk..  Then remove it.. Im assuming its not just sitting on a counter top, right?.. Do you wrap it in paper towels or somthing to absorb all the excess water?..    Could you wrap it in paper towels first until its dry and then put it in a garbage bag sprayed with lysol and pop it in the frig?  Then return it to its origonal casing tub?..  ((Just courious because a friend is about to try this))

Thanks alot!..

--happygrins :grin:

Extras: Filter Print Post Top
Re: Scotts 3n1 in a Pot [Re: Hippie3]
    #863015 -

In reply to:
so if you can live with the failure rate, fine.



Failure rate? So far, no failures here, but I'll keep that in mind. Remember that Scotts 3n1 is a composted product and for the most part is pasteurized out of the bag. There always is a chance, though, that a bag could be compromised at the store or during use if one is not careful.


--------------------
"I tried to put it all behind me, but my redneck past is nipping at my heels.." -- Ben Folds Five

Extras: Filter Print Post Top
Re: Scotts 3n1 in a Pot [Re: mickey_rourke]
    #863215 -

They seem to grow very fast outdoors in this climate (very hot and very humid.) The following image is a 24 hour update of the original post.

Enjoy!



--------------------
"I tried to put it all behind me, but my redneck past is nipping at my heels.." -- Ben Folds Five

Extras: Filter Print Post Top
Re: Scotts 3n1 in a Pot [Re: mickey_rourke]
    #863391 -

How large is that pot? (inside, not counting the rim)

Extras: Filter Print Post Top
Re: Scotts 3n1 in a Pot [Re: Baby_Hitler]
    #863405 -

Roughly 25cm in diameter.


--------------------
"I tried to put it all behind me, but my redneck past is nipping at my heels.." -- Ben Folds Five

Extras: Filter Print Post Top
Re: Scotts 3n1 in a Pot [Re: mickey_rourke]
    #863414 -

Just a few more questions.. I may have missed this info as I only briefly scanned the thread, but I was wondering- how deep is the pot? Also, how long did it take (how many days) after putting the cakes in the pot to start pinning?

Looks great and super easy, good job! Let us know what the final yeild is.


--------------------

Kumbayah my lord, Kumbayah...

Extras: Filter Print Post Top
Re: Scotts 3n1 in a Pot [Re: Drink_Punk_Soda]
    #863823 -

In reply to:
how deep is the pot?



Pretty much the same as the inside diameter -- roughly 25cm.

In reply to:
Also, how long did it take (how many days) after putting the cakes in the pot to start pinning?



It started pinning while I was out of town. If I were to guess, I would say about two weeks.

Since I?m posting to this thread, I might as well provide a 24 hour update of the casings shown above:



Peace


--------------------
"I tried to put it all behind me, but my redneck past is nipping at my heels.." -- Ben Folds Five

Extras: Filter Print Post Top
Re: Scotts 3n1 in a Pot [Re: mickey_rourke]
    #864129 -

everythings looking good!!!  what type of fruiting chamber are those 2 casings in?  Thanks :wink: 

Extras: Filter Print Post Top
Re: Scotts 3n1 in a Pot [Re: Darkmoon]
    #864138 -

In reply to:
what type of fruiting chamber are those 2 casings in?



Currently, a 30 gallon fish aquarium which has been turned on its side. The bottom layer of perlite is bone dry (didn't feel like cleaning it out), and the lucite "front door" is left cracked to help keep the RH where I want it.


--------------------
"I tried to put it all behind me, but my redneck past is nipping at my heels.." -- Ben Folds Five

Extras: Filter Print Post Top
Re: Scotts 3n1 in a Pot [Re: happygrins]
    #864613 -

i just sit the dunked casing/cake on some paper towels or newspaper in the humidity chamber until it's ready to return to it's tray in a day or two, when it stops draining.


--------------------
Admin @ mycotopia.net
Mycotopia

Extras: Filter Print Post Top
Re: Scotts 3n1 in a Pot [Re: Hippie3]
    #864636 -


Thanks Alot, Hippie..    BTW, ever try rehydrating it using sterilized poo/straw water sucked up in a syringe (Or even plain wate) and shot into the cake between flushes?..    Results?

Thanks

--happygrins :grin:

Extras: Filter Print Post Top
Re: Scotts 3n1 in a Pot [Re: happygrins]
    #864759 -

Great question. I'd like to know, too. My friends fruiting chamber IS her casing container. She can maintain humidity within the container just fine, but the casing layer itself consistently dries out. She mists heavily between flushes, but once pins appear, she directs the mist to the sides and lid of casing/fruiting chamber. If she uses a syringe to inject water, should the water be directed into the casing layer, or the body of the cake?
OR, maybe the dunk method could work with her straw cakes. She would have to dunk in the fruiting chamber itself, then pull the cake out, lay paper towels under and then later pull the cake back out to remove the paper towels. All that handling would make her worry about contams.
Would this work? Clean cake well, add enough water to cover the cake, let soak, invert and drain excess water, remove cake, place dry (or maybe somewhat dry) 50/50+ casing to the bottom of the chamber, replace cake, apply new casing layer and mist. The casing layer would (hopefully?) eliminate the need to remove the cake a second time....less work and maybe less exposure to possible contams? Also, since it takes a day or two to drain sufficiently, she wouldn't have to worry about damaging new pins that might appear during the draining. Does anyone see any flaws her her plan?


--------------------
I don't really know anyone who grows mushrooms. I just come here for fun.

Extras: Filter Print Post Top
Re: Scotts 3n1 in a Pot [Re: babyshroom]
    #864812 -


That sounds good to me..  A friend is in the same situation as you... (Having a casing that would be too big for a pot to dunk it in)..  Maybe even putting a layer of sterilized perlite on the bottom would be a good idea...  Then a nice 50/50 or 50/50+ on top.. 

--happygrins :grin:

Extras: Filter Print Post Top
Re: Scotts 3n1 in a Pot [Re: mickey_rourke]
    #865239 -

One more update for the curious (T3 on 50/50+ cased birdseed/millet).  The first pic is before harvest, and the second is after.  Total yield for first flush was approx. 300g wet -- this does not include the 22 caps removed for printing purposes.  Not bad for a 20cm x 20cm baking pan.. :grin:

Before:


After:


Peace 


--------------------
"I tried to put it all behind me, but my redneck past is nipping at my heels.." -- Ben Folds Five

Extras: Filter Print Post Top
Re: Scotts 3n1 in a Pot [Re: mickey_rourke]
    #865268 -

MOTHER OF PEARL!!!
that is awesome!
man I never personally seen yeilds like that from a single tub/bucket :frown:
man great work ultra great!
WOW!
thanks for the kick ass pics and update.
Now I'm a little jealous :ooo:

Extras: Filter Print Post Top
Re: Scotts 3n1 in a Pot [Re: mickey_rourke]
    #865284 -

AAWW. They are very cute and delicious looking. I am curious as to why they are collecting along the outer edge, but none the less, they are quite beautiful.

Extras: Filter Print Post Top
Re: Scotts 3n1 in a Pot [Re: Syprisss]
    #865646 -

In reply to:
AAWW. They are very cute and delicious looking. I am curious as to why they are collecting along the outer edge, but none the less, they are quite beautiful.



I'm not sure I understand what you mean. I don't see an unusual density on the edge. It looks relatively uniform to me..


--------------------
"I tried to put it all behind me, but my redneck past is nipping at my heels.." -- Ben Folds Five

Extras: Filter Print Post Top
Re: Scotts 3n1 in a Pot [Re: mickey_rourke]
    #866197 -

Great grow bro!

Beautiful fruits!!!


--------------------
Laterz, Road

Who the hell you callin crazy?
You wouldn't know what crazy was if Charles Manson was eating froot loops on your front porch!


Brainiac said:
PM the names with on there names, that means they have mushrooms for sale.


Extras: Filter Print Post Top
Re: Scotts 3n1 in a Pot [Re: mickey_rourke]
    #866427 -

Nice job mickey! I notice you're using my (filthy) oven incubator tek. :smile:

It seems that straight cased grains flush best judging by these results and the sjamaan kit I did, among other pics I've seen.  I'll be very interested to see the second flush of that tray.

Oh, and I spawned a large tray of 3 in 1 last night with a grated 1 pint pf cake of B+... I'll post the results.

Again, awesome flush, dude!  :grin: 


--------------------
================================================



"Have some congratulatory drugs." - C. Montgomery Burns

I'll probably always do drugs, so that just contributes to the addiction to The Shroomery... It's a vicious circle of bliss. :tongue2:

TMâ„¢ :cool:

Extras: Filter Print Post Top
Re: Scotts 3n1 in a Pot [Re: TM]
    #866784 -

In reply to:
Nice job mickey! I notice you're using my (filthy) oven incubator tek.



Actually, no. I would never use the oven for that. If you look in the background of the images, you will see that there is a foil covered bowl. It contains 50/50+ and was left in the oven to cool down. I place the casing there for the sake of convenience while I harvested and recased the tray, and took a few snapshots.

In reply to:
It seems that straight cased grains flush best judging by these results and the sjamaan kit I did, among other pics I've seen. I'll be very interested to see the second flush of that tray.



I agree. It should be interesting. I also had virtually no aborts.

In reply to:
Oh, and I spawned a large tray of 3 in 1 last night with a grated 1 pint pf cake of B+... I'll post the results.



Please do. I'd like to see the results. I harvested the straight 3n1 tray (PR) with no casing layer early this morning. Was a disappointing flush -- about 60 grams or so. For the second flush, I gave it a 50/50+ layer on top. We'll see if that makes much of a difference.

In reply to:
Again, awesome flush, dude!



Why thank you!

Peace


--------------------
"I tried to put it all behind me, but my redneck past is nipping at my heels.." -- Ben Folds Five

Extras: Filter Print Post Top
Jump to top Pages: | 1 | 2 | 3 |  [ show all ]

Shop: Sporeworks.EU Spores for European Microscopy   Original Sensible Seeds Bulk Cannabis Seeds   North Spore Bulk Substrate   Mushroom-Hut Liquid Cultures   MagicBag.co Certified Organic All-In-One Grow Bags


Similar ThreadsPosterViewsRepliesLast post
* Can't find Scotts 3n1...try this skatepunk2k2 1,297 6 10/11/02 10:41 AM
by skatepunk2k2
* What is the current concensus on Scotts 3n1? Baby_Hitler 1,179 9 11/02/02 02:30 PM
by daussaulit
* First BULK w/ SCOTTS 3n1 and Horse Dung and Wheat KaliedoscopEyes 1,397 10 08/07/02 09:09 AM
by KaliedoscopEyes
* which bulk substrate to use? soochi 482 1 06/13/03 01:30 PM
by houshroom
* 3n1 colonizing times cheesyincident 818 4 10/14/02 05:20 PM
by ellisdee625
* Scotts 3-n-1 question Oscuro_lobo 726 1 08/26/02 02:00 AM
by knurd
* deleted I3lunts42o 467 1 09/17/02 07:23 PM
by mickey_rourke
* Scotts 3n1 tek *DELETED* JOptionPane 529 1 09/04/02 09:31 PM
by MechanicalMan

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: DERRAYLD, Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
4,991 topic views. 5 members, 275 guests and 176 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.029 seconds spending 0.008 seconds on 18 queries.