Home | Community | Message Board


This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: Myyco.com Isolated Cubensis Liquid Culture For Sale   MagicBag.co All-In-One Bags That Don't Suck   Sporeworks.EU Spores for European Microscopy   North Spore Bulk Substrate   Mushroom-Hut Substrate Bags

Jump to first unread post Pages: 1 | 2 |  [ show all ]
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
vicks coolmist backpressure problems
    #8215340 -

There are many posts on this subject but a lot of them have garbage information.

So how many people use the vicks coolmist impeller style?

Do you use a hose resulting in a short life span due to back pressure?

What can you do to relief back pressure?

For a martha i'd just put it inside and cut holes in my martha's plastic however... I'm using it for a TiT for Pans..

I heard I can drill holes near the garden hose to relive back pressure extending the cool mists life span... if so by how long?


--------------------
coda said:
imachavel, Man you really need to do some reading, the amount of bullshit you put into almost every single one of your posts is absolutely astounding.

Extras: Filter Print Post Top
Re: vicks coolmist backpressure problems [Re: flavoraid]
    #8215343 -

put a flowmaster on it.

Extras: Filter Print Post Top
Re: vicks coolmist backpressure problems [Re: im_on_a_boat]
    #8215355 -

wtf is a flow master?


--------------------
coda said:
imachavel, Man you really need to do some reading, the amount of bullshit you put into almost every single one of your posts is absolutely astounding.

Extras: Filter Print Post Top
Re: vicks coolmist backpressure problems [Re: flavoraid]
    #8215368 -


Extras: Filter Print Post Top
Re: vicks coolmist backpressure problems [Re: im_on_a_boat]
    #8215386 -

why do you need to be a dumbass and spam the cultivation forums?


--------------------
coda said:
imachavel, Man you really need to do some reading, the amount of bullshit you put into almost every single one of your posts is absolutely astounding.

Extras: Filter Print Post Top
Re: vicks coolmist backpressure problems [Re: im_on_a_boat]
    #8215388 -

Roadkill already warned people for giving shitty advice. If you don't have anything helpful- why waste your time?

Extras: Filter Print Post Top
Re: vicks coolmist backpressure problems [Re: shevanel]
    #8215487 -

i dunno im very hella bored.  why waste your time flaming me for tryin to be comical and making an issue out of it instead of just answering his question?

and i'm not 'spamming' but i will not refute that i was being a dumbass.  that's the point it's supposed to be funny.

flowmaster lowers backpressure :awesome:

well hope ya get it figured out either way.

Edited by im_on_a_boat (03/30/08 07:17 PM)

Extras: Filter Print Post Top
Re: vicks coolmist backpressure problems [Re: im_on_a_boat]
    #8215542 -

http://www.shroomery.org/forums/showflat.php/Cat/0/Number/8210942/an/0/page/0

i think that may help you? i'm not sure though, i haven't moved up to either ultrasonic or coolmist.

Extras: Filter Print Post Top
Re: vicks coolmist backpressure problems [Re: myelination]
    #8215578 -

I was thinking of funneling it as it leaves the coolmist and then reducing the size to like 5/8"-1"

but I don't know if that would help much your still bottlenecking the humidifier.


--------------------
coda said:
imachavel, Man you really need to do some reading, the amount of bullshit you put into almost every single one of your posts is absolutely astounding.

Extras: Filter Print Post Top
Re: vicks coolmist backpressure problems [Re: flavoraid]
    #8218812 -

You have a few options with cool mists...
If you have a martha closet, you can put it in the bottom and let it do it's thing... No backpressure.
If you don't, then, I have one with a 4" dry hose fixed to the outlet and just let it pump into an fc through the original opening....
The last and best bet, at least as far as I have observed... Instead of one garden hose on the cool mists. Make two holes and run 2 hoses.... One from either side will work... BUt this will provided a little more humidity and you wont have to worry about backpressure.

Extras: Filter Print Post Top
Re: vicks coolmist backpressure problems [Re: Nwerd]
    #8218904 -

two hoses sounds like a good idea.


if there isn't any back pressure to burn out the motor I don't see why the unit won't last over a year as RR says spores clog up the unit after around a year others say back pressure can kill the unit in 1-3 months.

maybe i'll make 2 TiT FC's for my 1 coolmist.

hmm


--------------------
coda said:
imachavel, Man you really need to do some reading, the amount of bullshit you put into almost every single one of your posts is absolutely astounding.

Extras: Filter Print Post Top
Re: vicks coolmist backpressure problems [Re: flavoraid]
    #8218913 -

They will last quite a long time... Not to mention. It is fairly easy to fully take them apart and give them a good cleaning/sterilizing using some bleach water and some H2O2.

Extras: Filter Print Post Top
Re: vicks coolmist backpressure problems [Re: Nwerd]
    #8218934 -

how big do U think I could go and maintain 90-95% rh for pans? with two fruiting chambers?

or would I need to get an ultrasonic also?


4" hose without modification to the coolmist sounds like a good idea too. I like Blue Helix's setup with pvc running under his trays.

Would 4" hose be hard to manage to get the trip effect back into the reservoir?

Cheers dude, you get 5 shrooms.


--------------------
coda said:
imachavel, Man you really need to do some reading, the amount of bullshit you put into almost every single one of your posts is absolutely astounding.

Extras: Filter Print Post Top
Re: vicks coolmist backpressure problems [Re: flavoraid]
    #8219002 -

WAIT WAIT WAIT :smile:
Did you say "Pans" as in Panaeolus??
If so... DO NOT USE ANY HUMIDIFICATION.
Panaeolus.
If you ARE runnin Panaeolus, just keep em closed up... If you run a cool mist, do NOT fill it with water...
Panaeolus are different than cubes when it comes to fruiting. They need FAE, but they need more evaporation than they do Humidity. In fact, the only time I lost my ass in pans was the first time and I fruited like a cube with humidity added... I saw NOTHING!.
Read some more and found out that they just need Air Exchange. This can be achieved simply by making 1 1/2" hole in the top at each corner and stuffing with polyfill... Any pillow stuffing (clean pillow stuffing) will do. YOU WILL SEE PANS :smile:
Then you will SEE pans :smile:
Good luck...
If I'm mistaken and you are talking about Pans/Trays in FC's... If the FC's are about 20Gal each or less... You can get away with 1 hose to each one... But I would also put a small layer of perlite and water under the pan/trays for added boosts and run the coolmists on a timer... like 30 minutes every hour or so....
But hell yeah, if you are talking about "Panaeolus" abandon the cool mist, just give it a way to evacuate the CO2 rapidly by creating the filtered holes.
Pans are very delicate and easily contaminated.. Cool mist will definitely over saturate, and may introduce contams that aren't as detrimental to cubes, but deadly to pans...
Good luck... I think you'll do fine...

Extras: Filter Print Post Top
Re: vicks coolmist backpressure problems [Re: Nwerd]
    #8219033 -

hmmm

blue helix says 90-95%RH for pans he does say he runs a coolmist with water in it but without the funnel that draws water to the splash comb.

having the coolmist run through a 1" pvc under the trays too should prevent any splash/condensation as the humidity is 95% tops and the trays are above the pvc


https://www.shroomery.org/forums/showflat.php/Number/5619138#5619138

another thread I made about pan growth parameters

https://www.shroomery.org/forums/showflat.php/Cat/0/Number/8196395


--------------------
coda said:
imachavel, Man you really need to do some reading, the amount of bullshit you put into almost every single one of your posts is absolutely astounding.

Extras: Filter Print Post Top
Re: vicks coolmist backpressure problems [Re: flavoraid]
    #8219192 -

Give it a try, but the ONLY times I ever had any luck (every other time without humidity) I got some awesome flushes.
I just get tubs and spawn 2", then case, then fruit without any means of humidification...
I don't really know what others are doing, I just know what worked....

Extras: Filter Print Post Top
Re: vicks coolmist backpressure problems [Re: Nwerd]
    #8219224 -



No cool mist, no perlite and water, no humidity.
This was my second run on the pans, my first without humidity and my first success. I have not changed a thing since.

Extras: Filter Print Post Top
Re: vicks coolmist backpressure problems [Re: Nwerd]
    #8219322 -

so that's basically a monotub?

hmmm


--------------------
coda said:
imachavel, Man you really need to do some reading, the amount of bullshit you put into almost every single one of your posts is absolutely astounding.

Extras: Filter Print Post Top
Re: vicks coolmist backpressure problems [Re: flavoraid]
    #8219353 -

Nope... You don't even need that much space.
This is a 10gal aquarium. Probably same procedure as the mono tub, although I've never used one.
I just spawn the bottom 2" with colonized rye (panaeolus) and case with about 1/4" of 50/50 mix. Fruit without anything pumping anything in there..
It provides enough humidity for itself to sustain itself. If I see it getting a little dry.. I mist lightly... HOWEVER. Once pins form... DO NOT MIST!!
Everywhere you read it probably said Pans like wet feet and a dry head... This is very true. Once pinning sets... Do not mist... They will usually mature very quickly and flushes come quicker than cubes.

Extras: Filter Print Post Top
Re: vicks coolmist backpressure problems [Re: flavoraid]
    #8219359 -

If your worried about back pressure just make sure your hose has the same area as your coolmist opening that you sealed.

Maybe I am wrong but it seems to me that as long as you arent trying to push the air through a smaller hole then was originally in the coolmist then youll be fine.

If you are worried about spores getting in your system put a piece of cheese cloth or something over the hose opening.

Here you can see the hole I cut and the hole I sealed. (Mine might burn out because of the small hole, although... the hole is nice and long)


With a piece of cloth on the inside you wont have problems while still allowing for plenty of FAE


--------------------
MY TRADE LIST!!!

FULLY AUTOMATIC!! 12-Pot Multi Grow Hydroponic System for Trade.


Download PSX ISOs

Extras: Filter Print Post Top
Jump to top Pages: 1 | 2 |  [ show all ]

Shop: Myyco.com Isolated Cubensis Liquid Culture For Sale   MagicBag.co All-In-One Bags That Don't Suck   Sporeworks.EU Spores for European Microscopy   North Spore Bulk Substrate   Mushroom-Hut Substrate Bags


Similar ThreadsPosterViewsRepliesLast post
* For all vicks coolmist users Killa420 1,346 3 07/24/02 05:59 AM
by matts
* Kaz/Vicks coolmist enough air exchange? no-tone 1,169 9 04/29/05 01:33 AM
by Abermelin
* Vicks Coolmist M400 JaRRn 726 2 01/20/05 08:20 PM
by JaRRn
* Can i use the vicks coolmist humidifier without water? Godspeed 4,809 12 07/15/05 03:34 AM
by DK1
* vicks coolmist in canada? ast 745 6 08/28/02 04:43 PM
by girlskater
* New Vicks CoolMist suddenly breaks... o0brandnewcolony 520 3 06/10/05 04:44 PM
by scatmanrav
* Tips for setups with Ultrasonic + Coolmist
( 1 2 all )
exan 9,926 27 11/09/09 12:29 PM
by dopper dry
* Pics of your Vick's coolmist setup's Se77vN 1,616 8 02/05/03 06:41 PM
by bjkroll

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: DERRAYLD, Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
3,224 topic views. 6 members, 647 guests and 253 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.028 seconds spending 0.007 seconds on 16 queries.