Auto-SummaryThis post outlines a detailed tek (technique) for growing mushrooms using bird seed as substrate. Key steps include isolating a strong rhizomorphic culture from agar, inoculating bird seed with an agar wedge in a sterile environment, incubating jars at 82-84°F with hydrogen peroxide, and casing the jars with a peat moss, vermiculite, and coco coir mixture. The tek also covers setting up an automated fruiting chamber with controlled humidity and temperature, and provides guidance on harvesting and preserving the mushrooms. The author emphasizes the simplicity of the process and invites feedback for improvements.
Mike?s Bird Seed Bulk Tek
Obtaining a Strong Culture
The very first thing you do is isolate a strain on agar; your goal is to establish good rhizmorphic growth. Then you transfer that isolate to several petri dishes, using a glove box to do so.
Sterilizing of Bird Seed
Second after you have isolated a strong rhizmorphic culture, you now are going to inoculate some bird seed. Here?s how:
You will need 12 1 Pint Jars
Ratio per jar:
100 grams of Finch Seed
90-100 ml H20
Plastic lids with poly-fil
Cover each jar lid with aluminum foil
PC for 1 hour at 15 psi
Let cool for several hours
Inoculation with Agar Wedge
Next, with your isolated strain on the petri dishes, you now will inoculate the bird seed using an agar wedge (one plate will do 12 pint jars). This will be done in the glove box to assure sterility. Using a scalpel divide culture into 12 sections, then drop agar culture into each jar, then quickly close the lid. (Note the faster this is done the more chance of full sterility)
Incubation Chamber
Supplies Needed:
2 Rubbermaid Containers that will fit 12 1 pint jars
1 Submersible 100watt fish Tank heater
H20/H20 02 (Hydrogen Peroxide)
Thermometer
It is very easy to construct an incubator, take one Container fill it approximately half way up with H20 and 10% volume Hydrogen Peroxide. Put the Aquarium heater attached to the bottom completely submersed in water, then put the other container inside the container filled with water. Maintain 82-84 degrees during incubation. Place all jars sitting on the warm surface of the container put lid on and watch them colonize!
Maintenance of Jars
After approximately 2-3 days you should see the mycelium spreading fast. Once each jar has colonized 10% shake well and they will do the rest!
Casing Mix/Spawning
At this point is your choice if u want to case the birdseed of use it to spawn Compost/Worm Castings/Dung/Straw. Spawning of compost is probably the best way to obtain very large yields; you do this by pasteurizing the compost in oven at 160 degrees for 1 ? hours just like the casing mix. Using 15-20% spawn by volume for the compost tray, then maintain incubation temperatures. Let spawn run through compost 100%. Case with the casing mix below, wait until mycelium comes through 50-60% of casing layer then its ready to fruit. But casing bird seed will also do very well and is better to go this route first before you move on to spawning of compost.
Casing Materials:
5 parts Peat Moss
5 parts Vermiculite
5 parts Coco Coir
1 part Ground Oyster Shell/Ground Limestone (Calcium Carbonate)
80% H20 per volume
Mixing Casing/ Oven Pasteurization
Mix all the materials well in a large bowl then microwave for 8 minutes (stirring once while microwaving) Or put the casing material in a oven pan cover with foil and pasteurize for 1 ? hours at 160 degrees. Let cool for several hours.
Casing layer dimensions:
I use the small oven baking pans they work great with 1 pint jars. If your using two inches of colonized substrate use ? -1 inch of casing mix. Spread evenly do not pack down, cover tray with foil, maintain incubation temperature.
Fruiting Chamber Supplies:
2 15 Gallon Clear Rubbermaid Containers (Tight lids)
1 Double Port Aquarium Pump
6 ft. Aquarium Pump Hose
1 Electric Timer with Two On/Off Settings
3 Bags of Perlite
1 Bottle of Hydrogen Peroxide
1 Eureka Vacuum Cleaner Hepa Filter
2 gallons of H20
Acu-Rite Digital Thermometer/Hygrometer
Assembly of Fruiting Chamber
* Before you put anything in your fruiting chamber you want to make sure that the humidity is between 85-95% and your room temperature stays at 73-75 degrees!
1.) This is very easy to build. First you put 2-3 inches of perlite in the bottom of each container and add half water (example 3 inches perlite 1.5 inches of H20) then add a couple of cups of Hydrogen Peroxide to the perlite layer.
2.) Making your automated air exchange pump is very easy also. First take the rubber backing off the back of the pump this will allow better air flow for your air filter pump. Second tape the heap filter using duct tape or electrical tape over the open area of the pump. Make sure the filter is on tight or it will vibrate right off!
3.) Plug in the timer to the Aquarium Pump. Set timer so it comes on twice a day for 30 minutes each time.
4.) Cut the hose accordingly so it will run to each chamber.
5.) Make one hole for each chamber so that the hose will fit in snug. The best way is to heat up a screw driver then melt a hole through the container about half way up on the chambers side.
6.) Attach outside cord for thermometer/hygrometer inside one chamber, then put the actual thermometer in the other. (this saves you some $ because you don?t have to buy two Acu-Rite weather checkers)
YOUR GROW CHAMBER IS READY!!!!
Finally Fruiting
With this automated grow chamber you don?t have to do anything but watch them grow, it will provide fresh air exchanges twice a day and optimum humidity. Then all you do now is place the casing trays into the chamber maintain 85-95% humidity, and 73-77 degrees room temperature. And they will soon form pinheads which will turn into mature mushrooms. Enjoy!
Harvesting
Harvest when you want I say, but the time for peak potency is right when the veil breaks away from the cap.
Dying and Preservation
Dry the Fungi using a window screen and a fan for 12 hours. Do this by laying them out evenly on the screen then have the fan blowing on them directly with cool air. To finish up the drying process get some desiccant (Dri-Rite) and put the fungi in a bowl on a screen over the desiccant until they are cracker dry!
To preserve them use 1 pint mason jars sealed and kept in a cool dark place the freezer works well. Or if you have a vacuum sealer this is the best way!
Consumption
Eat them how you want, but remember this: Heat in anyway will break down Psilocybin faster than anything else so don?t make tea or smoke them heheheh!!!!! My favorite way is to blend them with Orange Juice and drink it down; it also hit you way faster this way!
Enjoy your trip it will teach you many new enlightenments!
I truly believe that this tek will yield the most mushrooms, send me your advice on any changes or improvements that should be added to this tek?
Edited by Azurepower (01/29/02 12:26 AM)
|