Home | Community | Message Board


This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Unfolding Nature Shop: Unfolding Nature: Being in the Implicate Order

Jump to first unread post Pages: 1
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
Leaky Pressure Canner AA-930
    #13337539 -

I have been using this canner for a while and it has recently started to get finicky with seating properly and tightly.  The canner usually starts to leak steam from one of the sides, but the location isn't always the same.  Does the petroleum jelly help to solve this problem?


--------------------

Extras: Filter Print Post Top
Re: Leaky Pressure Canner AA-930 [Re: FilamentousFungi]
    #13337698 -

I'm just brainstorming....

Do you put it on exactly the same why every time? Are there some sort of alignment marks? The PC I have has a little arrow stamped on the lid and pot.

Just an idea....

Extras: Filter Print Post Top
Re: Leaky Pressure Canner AA-930 [Re: conformist]
    #13337755 -

I do align the arrow or I used to.  Now if it is on the arrow it spits out steam.  Sometimes I can get it not to do it if the top is left of center.  It seems that one side wants to sit lower than the other side.  If they are equal height all the way around it tends to put out more steam.


--------------------

Extras: Filter Print Post Top
Re: Leaky Pressure Canner AA-930 [Re: FilamentousFungi]
    #13337760 -

I have an AA 925X and I think that the jelly will help.

I have not had this problem yet though.

Good luck,

JD


--------------------
Boyd Rice told my brother that life is a corny pack of freesakes

Myco-tek.org

Extras: Filter Print Post Top
Re: Leaky Pressure Canner AA-930 [Re: Javadog]
    #13337833 -

I think petroleum jelly will eat the seal even more, try something like olive or corn oil.  sounds like the seal is on it's way out, probably time to order a new one


--------------------
//Searching... Reading... Learning...

Supplies Canada
Damion5050's Links

Extras: Filter Print Post Top
Re: Leaky Pressure Canner AA-930 [Re: tusca]
    #13337972 -

There's no gasket on an AA, and I don't think petro jelly would stop a pressurized leak of hot steam (not sure), but what you could try is to make some sort of heat resistant gasket or patch..
In order to permanently fix the problem that is.. That sucks man those things are expensive, so salvage it if you can.. If not, you could sell it to me :stoned:

Extras: Filter Print Post Top
Re: Leaky Pressure Canner AA-930 [Re: Wirenut]
    #13337987 -

Ah, makes sense I only have a cheap mirro it has a gasket. possibly try a RTv gasket? that is it's true purpose after all.


--------------------
//Searching... Reading... Learning...

Supplies Canada
Damion5050's Links

Extras: Filter Print Post Top
Re: Leaky Pressure Canner AA-930 [Re: tusca]
    #13338038 -

tusca said:
Ah, makes sense I only have a cheap mirro it has a gasket. possibly try a RTv gasket? that is it's true purpose after all.



No No No
Just rub some vasaline on it...
a LIGHT coating...

Extras: Filter Print Post Top
Re: Leaky Pressure Canner AA-930 [Re: total]
    #13338061 -

Guess it works.. Makes me like my cheap one though.. :grin:

Extras: Filter Print Post Top
Re: Leaky Pressure Canner AA-930 [Re: Wirenut]
    #13338106 -

Wirenut said:
Guess it works.. Makes me like my cheap one though.. :grin:



The only reason one would ever leak would be due to improper use...
These things are made to last a lifetime..

Extras: Filter Print Post Top
Re: Leaky Pressure Canner AA-930 [Re: Wirenut]
    #13338107 -

It's done it's duty over the past 5 yrs.  I have had not issues until recently.  I have never used vasoline, but I will be giving that a try as I saw it in the RR video.  I would like to get either a 75x-120 or 941 in a few months if this one will stop leaking.  If not it will be another 930 till I can save enough money. 

I'll never use another mirro after using this AA for the past 5 years.


--------------------

Extras: Filter Print Post Top
Re: Leaky Pressure Canner AA-930 [Re: total]
    #13338120 -

total said:
Wirenut said:
Guess it works.. Makes me like my cheap one though.. :grin:



The only reason one would ever leak would be due to improper use...
These things are made to last a lifetime..



I can't figure out what could have gone wrong.  It has always been aligned with the arrows and evenly seated across the top.  Now it is not happy when I do the same thing that I have been doing for 5 years.


--------------------

Extras: Filter Print Post Top
Re: Leaky Pressure Canner AA-930 [Re: FilamentousFungi]
    #13338126 -

exactly...id like to see a mirro or presto used 6-9x a week for a few years :grin:
gaskets suck...
i dont hate on cheap pcs thou, a pc is a great thing! :awesomenod:

Extras: Filter Print Post Top
Re: Leaky Pressure Canner AA-930 [Re: total]
    #13338151 -

total said:
exactly...id like to see a mirro or presto used 6-9x a week for a few years :grin:
gaskets suck...
i dont hate on cheap pcs thou, a pc is a great thing! :awesomenod:



Half of it's life it saw 8-14 uses per week.  I would average it to 8 a week for 5 yrs or roughly 2000+ uses before it gave me any problems.


--------------------

Extras: Filter Print Post Top
Re: Leaky Pressure Canner AA-930 [Re: FilamentousFungi]
    #13338227 -

iv had my 921 for about 7 years now...lost it about a year ago to needing a new blowout plug...stupid rubber...
sucks being down one pressure cooker...i also use 2 cheapo's, one mirro, the other presto...
14 jars per about ever 2.5 hrs....late nights, lemme tell ya :crazy2:

Extras: Filter Print Post Top
Re: Leaky Pressure Canner AA-930 [Re: total]
    #13339089 -

I am sure that that plug is replaceable.

Is it here: http://www.pressurecooker-outlet.com/aaparts.htm ?

Good luck,

JD


--------------------
Boyd Rice told my brother that life is a corny pack of freesakes

Myco-tek.org

Extras: Filter Print Post Top
Re: Leaky Pressure Canner AA-930 [Re: FilamentousFungi]
    #13339170 -

FilamentousFungi said:
It's done it's duty over the past 5 yrs.  I have had not issues until recently.  I have never used vasoline, but I will be giving that a try as I saw it in the RR video.  I would like to get either a 75x-120 or 941 in a few months if this one will stop leaking.  If not it will be another 930 till I can save enough money. 

I'll never use another mirro after using this AA for the past 5 years.



If you've been using it for five years without lubing the mating surfaces, you've probably galled them up.  You're supposed to use a light coating of vaseline every cycle.  Use a paper towel to clean the mating surfaces and put a dab of Vaseline on your finger and coat both the PC and the matching surface on the lid.  Hopefully it's not too far gone.
RR


--------------------
Download Let's Grow Mushrooms



semper in excretia sumus solim profundum variat

"I've never had a failed experiment.  I've only discovered 10,000 methods which do not work."
Thomas Edison

Extras: Filter Print Post Top
Re: Leaky Pressure Canner AA-930 [Re: RogerRabbit]
    #13339188 -

RogerRabbit said:
FilamentousFungi said:
It's done it's duty over the past 5 yrs.  I have had not issues until recently.  I have never used vasoline, but I will be giving that a try as I saw it in the RR video.  I would like to get either a 75x-120 or 941 in a few months if this one will stop leaking.  If not it will be another 930 till I can save enough money. 

I'll never use another mirro after using this AA for the past 5 years.



If you've been using it for five years without lubing the mating surfaces, you've probably galled them up.  You're supposed to use a light coating of vaseline every cycle.  Use a paper towel to clean the mating surfaces and put a dab of Vaseline on your finger and coat both the PC and the matching surface on the lid.  Hopefully it's not too far gone.
RR



Even if it is messed up beyond fixing yourself, you can prob find a quality machine shop that can mill it down a hair and make everything fit again...
Id use that as last case scenario though.  It'd have to be someone id trust with my life, as i would be...

Extras: Filter Print Post Top
Jump to top Pages: 1

Unfolding Nature Shop: Unfolding Nature: Being in the Implicate Order


Similar ThreadsPosterViewsRepliesLast post
* help with pressure canner Skaloser 1,296 7 09/26/03 01:58 AM
by atomic1
* Help Using American Pressure Canner #921 Opera 1,360 6 09/02/04 12:16 AM
by Prisoner#1
* Pressure Canner and Sterilization? HeyZeus 1,418 3 05/01/07 10:34 AM
by SillyButtons
* Pressure Canner Question? DarkFluFFy 1,948 13 01/14/05 03:02 PM
by DarkFluFFy
* All American Pressure Canner 30 Quart - No Directions MycoCat 1,777 9 10/30/05 05:17 PM
by agar
* Pressure Canner vs. Pressure Cooker defthreat 1,886 4 11/03/02 11:34 AM
by defthreat
* Pressure canner Chris2292 553 3 02/05/07 09:51 PM
by Chris2292
* Don't ruin your pressure canner SeussA 1,155 2 03/06/02 03:28 AM
by WakingUpLate

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: DERRAYLD, Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
1,362 topic views. 18 members, 1,028 guests and 184 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.031 seconds spending 0.008 seconds on 14 queries.