Home | Community | Message Board
You are not signed in.
Sign In New Account
Forum Index Search Posts Trusted Vendors Highlights Galleries FAQ User List Chat Store Random Growery

Sporeworks
This site includes paid links. Please support our sponsors.

Mushrooms, Mycology and Psychedelics > Mushroom Cultivation
Threaded Mode Threaded  Previous topic Previous  View all topics Index  Next topic Next 

Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: Original Sensible Seeds High THC Strains   North Spore Cultivation Supplies

Jump to first unread post Pages: 1 | 2 |  [ show all ]
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
Laminar flow hood blower
    #26162748 -

Would this work if I found right size filter? I don't want it to big ya know.

Extras: Filter Print Post Top
Re: Laminar flow hood blower [Re: Hobbit GDF]
    #26162810 -

You might be able to make a small one like 12x24 depending on the water gage of the filter and the CFM your blower puts out.


--------------------
How I make and preserve tea


Consuming consumes a man That was never a purpose of life To only crave for material joys Is believing the lie - Mellow Mood

Extras: Filter Print Post Top
Re: Laminar flow hood blower [Re: SFS96]
    #26162892 -

Look up the specs online for a resistance to output chart. If it can blow at least
200cfm at 1.2" sp then it would work for a 1x2 hood; 400cfm at 1.2" sp for a 2x2;
And 600cfm for a 2x3. Seeing as it's a 1/10 hp motor I'd think it would work for
a 1x2 or possibly a 2x2


--------------------

Extras: Filter Print Post Top
Re: Laminar flow hood blower [Re: Hobbit GDF]
    #26162959 -

I think that bad boy is too small.  I found a partial list of its CFM output at various resistances.

https://www.ebay.com/itm/Dayton-Blower-Motor-Model-2C917B-1-10-HP-230-VAC-1550-RPM/253956256783

It shows that at .8"wc you're getting 180CFM.  By the time you get to 1.2"wc, it's  going to be a lot less.  Like maybe 100CFM.

That would work for a 1sq foot filter.  You can't work with that.

Extras: Filter Print Post Top
Re: Laminar flow hood blower [Re: JohnRainy]
    #26162981 -

Well shoot. Now what.

Extras: Filter Print Post Top
Re: Laminar flow hood blower [Re: Hobbit GDF]
    #26162994 -

I suppose if you really want to be efficient you could do some calculations and get a second blower to have a twin engine hood.

Extras: Filter Print Post Top
Re: Laminar flow hood blower [Re: JohnRainy]
    #26163017 -

I just picked up a blower for $55 on ebay shipped http://www.fantech.net/enca/home/Products/fans--accessories/circular-duct-fans/circular-duct-fans-with-ac-motors/fg/fg-6xl-centrif-inline-fan/

and a 12x24x3 HEPA replacement filter for a name brand flowhood for $85 shipped.

Sheet of Plywood, prefilter for about $30 and I had a switch and cord already in my garage as well as paint/primer.

What I learned is that you need to make sure the fan you purchase can flow 100CFM per square foot at the specified resistance of the HEPA filter too much flow can be as bad as not enough. My advice would be to find a fan that will get you about 125/150CFM at 1.1-1.2 (Per square foot of filter) if you use a prefilter (Which I recommend if you want to extend the life of the HEPA) Mine flows 225CFM @ 1.0 inwg which is plenty because my HEPA has a pressure drop of .8 and my prefilter has a pressure drop of .18inwg

Hope this helps, it can be daunting finding the right filter/fan combo. For me I wanted to shop around and get the best deal on both so it took me a week of frustration but I am happy with the saturday it took to build and the $170 wallet hit.

Good luck!


--------------------
"Life is really simple, but we insist on making it complicated."
“I hear and I forget. I see and I remember. I do and I understand.”
“When it is obvious that the goals cannot be reached, don’t adjust the goals, adjust the action steps.”
– Confucius

Edited by Nesmaster01 (08/31/19 09:37 PM)

Extras: Filter Print Post Top
Re: Laminar flow hood blower [Re: Nesmaster01]
    #26163031 -

Surprising I would have thought a 1/10 hp motor would blow harder but I guess
not.

Ya 180cfm isnt really good for any thing hood related unless you wanna do 1 jar at a time:lol:


--------------------

Extras: Filter Print Post Top
Re: Laminar flow hood blower [Re: natedawgnow]
    #26163040 -

natedawgnow said:
Surprising I would have thought a 1/10 hp motor would blow harder but I guess
not.

Ya 180cfm isnt really good for any thing hood related unless you wanna do 1 jar at a time:lol:



Yeah I will say the hardest part about designing my flow hoow was the blower selection at first I thought it was all about CFM, but the resistance of the filter is what creates the laminar flow but puts a lot of strain on the blower. I am glad I used this site to dig in and do my research before building mine.

This is the first full week of using the flow hood and I have to say wow its to much better than using my glove box.


--------------------
"Life is really simple, but we insist on making it complicated."
“I hear and I forget. I see and I remember. I do and I understand.”
“When it is obvious that the goals cannot be reached, don’t adjust the goals, adjust the action steps.”
– Confucius

Extras: Filter Print Post Top
Re: Laminar flow hood blower [Re: Hobbit GDF]
    #26163056 -

The best way Is find the size filter you need and then match a blower to your filter.

1/10 hp is pretty small.
230 volts you'll need.

For a 24x24x5.8 inch filter, this is the size blower you'll need: 

Dayton 1TDU2  https://www.grainger.com/product/DAYTON-Rectangular-Permanent-Split-1TDU2
For laminar flow....

24x24x8.5 filter:  https://fungi.com/collections/laboratory-equipment/products/24-x-24-x-5-8-micron-filter


--------------------
     

Extras: Filter Print Post Top
Re: Laminar flow hood blower [Re: micelio]
    #26163449 -

The 1tdu2 is pretty overkill for anything under a 2'x3' even though FP recommends
it as a universal blower.


--------------------

Extras: Filter Print Post Top
Re: Laminar flow hood blower [Re: natedawgnow]
    #26163583 -

Yes, your right.. It's slightly over..
I would rather be over than borderline or under.
I choke my intake down a  little and find it to be perfect.
As the filter gets older It could lose a little of Its air flow, no problem just readjust the choke for more flow.

When I built my unit I went with the 1tdu2. The next Dayton down in size was too borderline for my liking, considering the pre-filter and Its restriction when It starts to load up with dust particles.


--------------------
     

Extras: Filter Print Post Top
Re: Laminar flow hood blower [Re: micelio]
    #26163593 -

Definitely I just imagine that op wanted something on the smaller side based on
the op.

It would probably be worth it though if they ever want to upgrade later


--------------------

Extras: Filter Print Post Top
Re: Laminar flow hood blower [Re: natedawgnow]
    #26163650 -

I was hoping The op would look at the specs. of his blower and compare the specs. of a blower that's compatible with a 24x24x5.8 and decide what size filter he would need for his blower.

When he sees his 1.5 amp blower compared to a 7.3 amp 1tdu2 blower and he wants laminar flow. Well I would say It time to scrap that idea of using his blower.
Also would his blower produce 0.8 to 1.1 sp. for laminar flow?


--------------------
     

Extras: Filter Print Post Top
Re: Laminar flow hood blower [Re: micelio]
    #26163716 -

micelio said:
Also would his blower produce 0.8 to 1.1 sp. for laminar flow?


That's the big one! It is specifically what caused me so much heartache with building my flowhood.


--------------------
"Life is really simple, but we insist on making it complicated."
“I hear and I forget. I see and I remember. I do and I understand.”
“When it is obvious that the goals cannot be reached, don’t adjust the goals, adjust the action steps.”
– Confucius

Extras: Filter Print Post Top
Re: Laminar flow hood blower [Re: Nesmaster01]
    #26166789 -

Would one of these work?


It's a blower used to dry carpet or paint

Extras: Filter Print Post Top
Re: Laminar flow hood blower [Re: Hobbit GDF]
    #26166875 -

You need to know the specs. on the filter that your planning on using before you can match up a blower.


--------------------
     

Extras: Filter Print Post Top
Re: Laminar flow hood blower [Re: micelio]
    #26166926 -

Ok. So filter first. Thanks. Might just have to wait for tax season to get this baby going. Just upgraded my sab to sterilite 1478. So excited over little things

Extras: Filter Print Post Top
Re: Laminar flow hood blower [Re: micelio]
    #26166927 -

Its good to know the specs on your blower and filter.  But, if you dont know, you can still get it to work as long as your blower isn't too small.  You can always reduce the output of an AC blower with a variable frequency drive, or by constricting the intake or output with tape or something.

Basically, you want the air coming out of the filter to smoothly blow a lighter's flame over 45-90 degrees when you hold it near the filter's face. 

That 3 speed blower posted above looks like it should be plenty strong enough, but you should really see if you can find the specs regarding how it preforms under resistance to be sure.

Extras: Filter Print Post Top
Re: Laminar flow hood blower [Re: JohnRainy]
    #26166997 -

If your looking for laminar flow is the question..

Some blowers will deliver the cfm. but will not deliver the static pressure. For laminar flow you need a blower that delivers from .8 up to 1.1 sp.

If you don't have adequate pressure in the plenum you'll end up with uneven velocity from your filter (turbulence)...
Turbulence will draw contaminates into your workspace..

Here's a cool vid on laminar flow: 


--------------------
     

Extras: Filter Print Post Top
Jump to top Pages: 1 | 2 |  [ show all ]

Shop: Original Sensible Seeds High THC Strains   North Spore Cultivation Supplies

Mushrooms, Mycology and Psychedelics > Mushroom Cultivation
Threaded Mode Threaded  Previous topic Previous  View all topics Index  Next topic Next 

Similar ThreadsPosterViewsRepliesLast post
* Laminar Flow Hood Blower. audiophoenix 2,364 3 11/15/09 06:52 AM
by stonesun
* Laminar Flow Hood Blower question nugjug 1,199 7 03/08/10 11:29 AM
by BlueIndian
* Laminar Flow Hood SOS ShroomGoddess 6,433 19 04/27/07 12:35 AM
by Brainiac
* Homemade "Laminar" flow hood
( 1 2 all )		 The shroomy 1 35,945 24 08/15/08 04:58 AM
by Ogre812
* 2x4' Laminar Flow Hood Agrower 5,667 12 07/03/10 02:49 AM
by Dell500
* laminar flow hood - getting started zachv15165 2,347 6 12/15/08 06:27 PM
by Shroominit
* laminar flow hood - getting started zachv15165 5,994 5 12/15/08 05:54 PM
by Mephistophelian
* Can you use a Walmart bought Air Purifier - in place of a Laminar Flow Hood?
( 1 2 all )		 JoeSmoe 17,284 21 12/30/09 11:50 AM
by Cordyceps

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
1,097 topic views. 9 members, 2,383 guests and 78 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.035 seconds spending 0.008 seconds on 16 queries.