Home | Community | Message Board


This site includes paid links. Please support our sponsors.

mycocurious's Gallery
Galleries
Folders:  bulk_pasteurizer  casings  composting  contaminates  fruiting_chambers  humidifiers  ipomoea_tricolor  lab_equipment  misc  other_species  spawning  spore_printing  substrates 
spade_drill_bit.jpg
spade_drill_bit.jpg



dremel_drill_bits.jpg
dremel_drill_bits.jp...



dremel.jpg
dremel.jpg



tube_cutter.jpg
tube_cutter.jpg



washingmachine_driptray.jpg
washingmachine_dript...

these 36" x 36" drip trays for washing machines are perfectly sized as a pan/tray for our greenhouses.

greenhouse_15.jpg
greenhouse_15.jpg

the completed greenhouse with the lighting shown from behind.

greenhouse_14.jpg
greenhouse_14.jpg

I've since thrown out those hoses and gotten ones that don't kink so damn much...but you get the idea.

greenhouse_13.jpg
greenhouse_13.jpg

When hooked up to my bulk humidifier, this is what it looks like when it's in the middle of one of the ultrasonic fogger's "pulses"...

greenhouse_12.jpg
greenhouse_12.jpg

Here we see a sample hose hooked up to the greenhouse. Any hose with a 5/8" inner diameter will fit the CPVC perfectly...make sure everything's snu...

greenhouse_11.jpg
greenhouse_11.jpg

The self-stick lamination, once cut out with a hot tool, provides superior reinforcement to prevent stretching and tearing of the sheathing...

greenhouse_10.jpg
greenhouse_10.jpg

All dress up and nowhere to go, this is the green house with the sheathing in place...

greenhouse_09.jpg
greenhouse_09.jpg

Using a tool the same size as my plumbing I cut (melt) through the laminating stickers and the plastic sheathing to route the plumbing...

greenhouse_08.jpg
greenhouse_08.jpg

Blue dots are placed on the plastic to mark where the plumbing goes and then they are covered with two pieces of the self-sticking laminating plastic.

greenhouse_07.jpg
greenhouse_07.jpg

Side view, showing the caps on the ends of the main plumbing runs. This allows you to change which side the hoses hookup, daisy chain them, etc...

greenhouse_06.jpg
greenhouse_06.jpg

Full frontal nudity...Here you can see the entire setup without the greenhouse sheathing over the frame.

greenhouse_05.jpg
greenhouse_05.jpg

Nice thing about this setup is that the wands are interchangeable and can be replaced with any kind of attachment you care to design...

greenhouse_04.jpg
greenhouse_04.jpg

The small pin-holes were made with my dremel tool using the smallest drill bit i had for it. Note which pieces are welded and which are not...

greenhouse_03.jpg
greenhouse_03.jpg

Each one of these will be run through those holes we cut out of the framework. The elbows are welded to the center piece but the end-pieces are NOT!!

greenhouse_02.jpg
greenhouse_02.jpg

The framework of the greenhouse has a perfect "extra" hole just waiting to be plumbed with an automated FAE system...

greenhouse_01.jpg
greenhouse_01.jpg

"4-Tier Mini Portable GREENHOUSE" purchased online from ebay. These are super cheap and extremely versatile...


Page: 1 | 2 | Next

Images per page: 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | All

Columns: 3 | 4 | 5

Copyright 1997-2024 Mind Media. Some rights reserved.

Generated in 0.011 seconds spending 0.004 seconds on 5 queries.