|
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
Nem
Stranger
Registered: 09/29/07
Posts: 144
Last seen: 13 years, 6 months
|
Fluorescent light in monotub
#7964762 - 02/01/08 12:42 PM (16 years, 14 hours ago) |
|
|
I am contemplating putting a fluorescent light inside of a monotub for a super stealth grow. Does anyone see any problems with doing this? Like maybe the heat? Or would all be good?
Also does anyone know where I can find an 18" fluorescent bulb in the 6500 kelvin range? I found an 18" fixture at walmart that will fit but they don't have the proper heat range. I wanted to use that instead of the screw in style fluorescent bulbs because maybe it won't get as warm, the screw in style I am using now gets pretty warm
|
KillerPicklez



Registered: 12/13/07
Posts: 16,920
Loc:
|
Re: Fluorescent light in monotub [Re: Nem]
#7964818 - 02/01/08 12:52 PM (16 years, 14 hours ago) |
|
|
not only would heat be an issue, i believe it would also burn out and become a fire hazard. not many lights would be able to function properly and safely in an environment with such high humidity.
|
RogerRabbit
Bans for Pleasure



Registered: 03/26/03
Posts: 42,214
Loc: Seattle
Last seen: 11 months, 3 days
|
Re: Fluorescent light in monotub [Re: KillerPicklez]
#7964864 - 02/01/08 01:03 PM (16 years, 14 hours ago) |
|
|
Correct. Lights with high voltage ballasts have no place in a high humidity environment. RR
-------------------- Download Let's Grow Mushrooms semper in excretia sumus solim profundum variat "I've never had a failed experiment. I've only discovered 10,000 methods which do not work." Thomas Edison
|
Nem
Stranger
Registered: 09/29/07
Posts: 144
Last seen: 13 years, 6 months
|
Re: Fluorescent light in monotub [Re: RogerRabbit]
#7966960 - 02/01/08 10:21 PM (16 years, 4 hours ago) |
|
|
Good call, thanks for the feedback.
|
smily
lookin 4 my ass wit both handz



Registered: 07/13/06
Posts: 2,592
Loc: Lee HO FooKs
Last seen: 9 months, 3 days
|
Re: Fluorescent light in monotub [Re: Nem]
#7966967 - 02/01/08 10:24 PM (16 years, 4 hours ago) |
|
|
not to be a dick but could you not take the fluro tube and the end holders and remount them and have just the TUBE in the chamber??
ya can do what ever to the tube.
|
sonicnirvana
Master ofCroutons



Registered: 07/25/07
Posts: 266
Loc: Long Island, NY
Last seen: 10 years, 11 months
|
Re: Fluorescent light in monotub [Re: smily]
#7967255 - 02/01/08 11:54 PM (16 years, 3 hours ago) |
|
|
wow really? i bought one of those 13'' fluoro tubes from mushymart and was using it in my FC for a while. nothing happened but it freaks me out that i could have burned down my house. i never even thought of that.
i was hoping to use the same thing in my monotub, but now i dont know how im gonna get sufficient light on it.
-------------------- WIN MORE THAN 600 PS. CUBENSIS SPORE PRINTS!!!! VARIOUS STRAINS!!!! JUST PM WITH ME THE CORRECT ANSWERS TO THESE QUESTIONS: 1. Which student seems to be sleepy? 2. Which boys are twins? 3. Which girls are twins? 4. How many women can you see in the picture? 5. Which one of them is the teacher? (see pic) http://img267.imageshack.us/img267/2/54133070xy0.png RIP GOOD DOCTOR
|
Cloneufc
Master Exploder!



Registered: 11/15/07
Posts: 1,237
Loc: Las Vegas
Last seen: 5 months, 29 days
|
Re: Fluorescent light in monotub [Re: sonicnirvana]
#7967444 - 02/02/08 01:27 AM (16 years, 1 hour ago) |
|
|
You can put your lights inside the monotube.Just put plastic wrap over the light fixture. It must have a plastic shield like the grow lights. Silicone the plastic wrap to the sides of the monotube. Its works great.
|
pinc


Registered: 12/11/05
Posts: 55
|
Re: Fluorescent light in monotub [Re: Cloneufc]
#7967463 - 02/02/08 01:35 AM (16 years, 1 hour ago) |
|
|
you could try using blue LEDs, they create virtually no heat.
|
KillerPicklez



Registered: 12/13/07
Posts: 16,920
Loc:
|
Re: Fluorescent light in monotub [Re: sonicnirvana]
#7967694 - 02/02/08 05:53 AM (15 years, 11 months ago) |
|
|
Quote:
sonicnirvana said: wow really? i bought one of those 13'' fluoro tubes from mushymart and was using it in my FC for a while. nothing happened but it freaks me out that i could have burned down my house. i never even thought of that.
i was hoping to use the same thing in my monotub, but now i dont know how im gonna get sufficient light on it.
lighting isnt even significant for mushrooms. Just place one outside of your monotub, above the lid. in my experience mushrooms could really care less about how much light they receive
|
RogerRabbit
Bans for Pleasure



Registered: 03/26/03
Posts: 42,214
Loc: Seattle
Last seen: 11 months, 3 days
|
Re: Fluorescent light in monotub [Re: KillerPicklez]
#7967857 - 02/02/08 08:27 AM (15 years, 11 months ago) |
|
|
Quote:
KillerPicklez said: lighting isnt even significant for mushrooms. Just place one outside of your monotub, above the lid. in my experience mushrooms could really care less about how much light they receive
Lighting is EXTREMELY important for a good pinset. Cubes will fruit in very low light conditions, but bright fluorescent light will help to trigger the pinsets the old timers show all the time that makes folks drool. Actually, you're probably right. The mushrooms don't care that much about light, but the mycelium sure as heck does.
Lights, especially fluroescent, should be OUTside the terrarium, but near enough to flood the fruiting chamber in bright, high frequency light. Don't put the ballast outside and the lamps inside. The tombstones have a fairly high voltage potiential across them, and wrapping a warm item in plastic in a wet environment is. . .dumb. There isn't much more useless than 'blue' mood lights, especially from led's. RR
-------------------- Download Let's Grow Mushrooms semper in excretia sumus solim profundum variat "I've never had a failed experiment. I've only discovered 10,000 methods which do not work." Thomas Edison
|
Thyrax
No way



Registered: 01/03/08
Posts: 1,068
Loc: Montreal, Quebec
Last seen: 13 years, 4 months
|
Re: Fluorescent light in monotub [Re: RogerRabbit]
#7967953 - 02/02/08 09:24 AM (15 years, 11 months ago) |
|
|
I have a Black light in my room , can i use it for my mushy ?
--------------------
|
DJYoshaBYD


Registered: 04/07/07
Posts: 2,405
|
Re: Fluorescent light in monotub [Re: Thyrax]
#7967964 - 02/02/08 09:32 AM (15 years, 11 months ago) |
|
|
dont use a blacklight... you will start a fire if you have it inside the monotub... sooo.. just use some bright ass compact fluorescent lights outside the chamber and you will get a good pinset... it just needs to be bright enough outside the chamber to cover the casing in light...
you really dont want to mess around with 120v and water... very bad mixture that will knock your dick in the dirt... just be careful... but you wont have to if the light is outside the high humidity area
|
Thyrax
No way



Registered: 01/03/08
Posts: 1,068
Loc: Montreal, Quebec
Last seen: 13 years, 4 months
|
Re: Fluorescent light in monotub [Re: DJYoshaBYD]
#7967975 - 02/02/08 09:37 AM (15 years, 11 months ago) |
|
|
I mean , can i use a black light outside the FC , Or the light I usualy use to light my room while do the job ?
--------------------
|
DJYoshaBYD


Registered: 04/07/07
Posts: 2,405
|
Re: Fluorescent light in monotub [Re: Thyrax]
#7968005 - 02/02/08 09:49 AM (15 years, 11 months ago) |
|
|
black lights suck for mushies... they do not put out the right type of light to make a good pinset... just get a couple "energy saver" light bulbs.. the curley ones.. those are compact florescent... those will work just fine...
|
sonicnirvana
Master ofCroutons



Registered: 07/25/07
Posts: 266
Loc: Long Island, NY
Last seen: 10 years, 11 months
|
Re: Fluorescent light in monotub [Re: KillerPicklez]
#7978387 - 02/04/08 04:30 PM (15 years, 11 months ago) |
|
|
Quote:
KillerPicklez said:
Quote:
sonicnirvana said: wow really? i bought one of those 13'' fluoro tubes from mushymart and was using it in my FC for a while. nothing happened but it freaks me out that i could have burned down my house. i never even thought of that.
i was hoping to use the same thing in my monotub, but now i dont know how im gonna get sufficient light on it.
lighting isnt even significant for mushrooms. Just place one outside of your monotub, above the lid. in my experience mushrooms could really care less about how much light they receive
dude... did you even read Hyphae's Pinning Strategy? It's in your signature...
-------------------- WIN MORE THAN 600 PS. CUBENSIS SPORE PRINTS!!!! VARIOUS STRAINS!!!! JUST PM WITH ME THE CORRECT ANSWERS TO THESE QUESTIONS: 1. Which student seems to be sleepy? 2. Which boys are twins? 3. Which girls are twins? 4. How many women can you see in the picture? 5. Which one of them is the teacher? (see pic) http://img267.imageshack.us/img267/2/54133070xy0.png RIP GOOD DOCTOR
|
KillerPicklez



Registered: 12/13/07
Posts: 16,920
Loc:
|
Re: Fluorescent light in monotub [Re: sonicnirvana]
#7978468 - 02/04/08 04:42 PM (15 years, 11 months ago) |
|
|
Quote:
sonicnirvana said:
Quote:
KillerPicklez said:
Quote:
sonicnirvana said: wow really? i bought one of those 13'' fluoro tubes from mushymart and was using it in my FC for a while. nothing happened but it freaks me out that i could have burned down my house. i never even thought of that.
i was hoping to use the same thing in my monotub, but now i dont know how im gonna get sufficient light on it.
lighting isnt even significant for mushrooms. Just place one outside of your monotub, above the lid. in my experience mushrooms could really care less about how much light they receive
dude... did you even read Hyphae's Pinning Strategy? It's in your signature...
Yes I did, Its mainly there as a reference for other people. The old hands will say that 12-16 hours of light is best of OPTIMAL results. For people who dont want to deal with lighting, like myself, you can get by with just normal room lighting and that has worked fine for me.
Just because its in my signature doesnt mean I agree with their techniques 100%, just means I realize its a good reference material that is valuable to be shared with other people, without them digging it up themselves.
Everyone has their own way of doing stuff. You will find that some people agree with me that they get great results with minimal lighting, then you will find other people who have been doing this for years and have very nice setups with lights and timers and say that for OPTIMAL results use a specific light cycle.
|
RogerRabbit
Bans for Pleasure



Registered: 03/26/03
Posts: 42,214
Loc: Seattle
Last seen: 11 months, 3 days
|
Re: Fluorescent light in monotub [Re: KillerPicklez]
#7978548 - 02/04/08 04:56 PM (15 years, 11 months ago) |
|
|
Correct. A 60 watt light bulb on the ceiling is enough to trigger a few pins. Failure to use proper lighting doesn't mean the entire project is going to fail. It simply means it will be less than what could be achieved by a tad more work.
It's sort of like driving your car with one tire flat. You'll still get there, but not as fast, and people will point and giggle. RR
-------------------- Download Let's Grow Mushrooms semper in excretia sumus solim profundum variat "I've never had a failed experiment. I've only discovered 10,000 methods which do not work." Thomas Edison
|
KillerPicklez



Registered: 12/13/07
Posts: 16,920
Loc:
|
Re: Fluorescent light in monotub [Re: RogerRabbit]
#7978572 - 02/04/08 04:59 PM (15 years, 11 months ago) |
|
|
Quote:
RogerRabbit said: It's sort of like driving your car with one tire flat. You'll still get there, but not as fast, and people will point and giggle. RR
Ahh you're soo cheeky with your analogies. I respect you a lot, ive read tons of information and learned a lot from you.
Heres my flat tire:
|
Spire
Mycophagous


Registered: 09/05/06
Posts: 314
Last seen: 4 years, 5 months
|
Re: Fluorescent light in monotub [Re: RogerRabbit]
#7978580 - 02/04/08 05:00 PM (15 years, 11 months ago) |
|
|
Lighting does make a HUGE difference in pinsets.
Pinsets triggered using a decent 16 Watt CFL:
-------------------- Old Member, New Name. One makes "good luck". With the ability to recognize a good opportunity. Then, to exploit it. -SixTango/Agar
|
KillerPicklez



Registered: 12/13/07
Posts: 16,920
Loc:
|
Re: Fluorescent light in monotub [Re: Spire]
#7978632 - 02/04/08 05:07 PM (15 years, 11 months ago) |
|
|
in short we are agreeing but agruing about something stupid. Yes lighting is important and needed for optimal results. but you arent wasting your time if you dont have a light. you can still get fairly good results.
|
|