Home | Community | Message Board


Crestline Sales - MycoPath
Please support our sponsors.

Mushrooms, Mycology and Psychedelics >> Mushroom Cultivation

Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Amazon Shop: Microscope

Jump to first unread post. Pages: 1
Offlinechris92346
Stranger
Registered: 09/10/05
Posts: 436
Last seen: 7 years, 7 months
making syringes
    #4675390 - 09/17/05 11:01 PM (12 years, 5 days ago)

I am ready to make my spore syringe. I am gonna use the bag that the print came in. The tek I read recommends removing the card stock that the print is on while scraping the spores in the bag.

This doesn't seem to be sterile. What would happen if I left the card stock in the bag and applied the water. This would definitely be a cleaner way to make the syringe but would the wet card stock mess it up?


Post Extras: Print Post  Remind Me! Notify Moderator
InvisibleHolydiver
Stranger
 User Gallery

Folding@home Statistics
Registered: 03/20/01
Posts: 5,156
Loc: The midnight sea
Trusted Cultivator
Re: making syringes [Re: chris92346]
    #4675421 - 09/17/05 11:09 PM (12 years, 5 days ago)

Psilocyber's Syringe Tek

Read the second part, it explains how you create a sterile surface to scrape the spores off on, then suck up with a syringe.


--------------------
To find a place to live between the negatives and positives.


Post Extras: Print Post  Remind Me! Notify Moderator
Offlinechris92346
Stranger
Registered: 09/10/05
Posts: 436
Last seen: 7 years, 7 months
Re: making syringes [Re: Holydiver]
    #4675439 - 09/17/05 11:15 PM (12 years, 5 days ago)

thanks for the reply... I figure though if I have to scrape the spores anyways I might as well use the bag.


Post Extras: Print Post  Remind Me! Notify Moderator
InvisibleHolydiver
Stranger
 User Gallery

Folding@home Statistics
Registered: 03/20/01
Posts: 5,156
Loc: The midnight sea
Trusted Cultivator
Re: making syringes [Re: chris92346]
    #4675448 - 09/17/05 11:18 PM (12 years, 5 days ago)

You don't know if the bag is dirty or clean though, so you may as well scrape them off on a sterile surface to up your chances of success. Good luck.


Post Extras: Print Post  Remind Me! Notify Moderator
OfflineShdwstr
FSRCanada
Male

Registered: 02/18/01
Posts: 2,156
Loc: Ontario, Canada
Last seen: 3 years, 8 months
Re: making syringes [Re: Holydiver]
    #4675499 - 09/17/05 11:30 PM (12 years, 5 days ago)

I can pretty much guarantee the bag is sterile.  :wink:


Post Extras: Print Post  Remind Me! Notify Moderator
InvisibleHolydiver
Stranger
 User Gallery

Folding@home Statistics
Registered: 03/20/01
Posts: 5,156
Loc: The midnight sea
Trusted Cultivator
Re: making syringes [Re: Shdwstr]
    #4675505 - 09/17/05 11:31 PM (12 years, 5 days ago)

Quote:

Shdwstr said:
I can pretty much guarantee the bag is sterile.  :wink:




How's that?


Post Extras: Print Post  Remind Me! Notify Moderator
OfflineShdwstr
FSRCanada
Male

Registered: 02/18/01
Posts: 2,156
Loc: Ontario, Canada
Last seen: 3 years, 8 months
Re: making syringes [Re: Holydiver]
    #4675543 - 09/17/05 11:40 PM (12 years, 5 days ago)

30 some odd years of practice :smile:

But your right "Pretty Sure" isn't 100%,
just 99.9 :laugh:


Post Extras: Print Post  Remind Me! Notify Moderator
Offlinechris92346
Stranger
Registered: 09/10/05
Posts: 436
Last seen: 7 years, 7 months
Re: making syringes [Re: Holydiver]
    #4675595 - 09/17/05 11:54 PM (12 years, 5 days ago)

well if the bag is not sterile I am screwed anyways because that is where the spores are coming from.


Post Extras: Print Post  Remind Me! Notify Moderator
Offlinechris92346
Stranger
Registered: 09/10/05
Posts: 436
Last seen: 7 years, 7 months
Re: making syringes [Re: Shdwstr]
    #4675613 - 09/17/05 11:57 PM (12 years, 5 days ago)

I got the print from FSR Canada... so I am trusting you! I havn't won the lottery latley so I am trusting the 99.9 % chance LOL just woundering do you do the prints or do the donators make the prints?


Post Extras: Print Post  Remind Me! Notify Moderator
Offlinetokey666
Lamb of God
 User Gallery

Registered: 08/05/05
Posts: 630
Loc: Your Mom
Last seen: 10 years, 8 months
Re: making syringes [Re: Shdwstr]
    #4675625 - 09/17/05 11:59 PM (12 years, 5 days ago)

The first time I made a syringe directly from a bag, I poked a hole DIRECTLY though the other side. This giving me a ticking drip. VERY ANNOYING. SO, all I did was scrape, (using a sterile razor blade) the spores from the print into an alcohol sterilized shot glass. Squirted my clean syringe water into the glass. Swooshed it around with the needle. THEN sucked the water up.

This way, you won't risk poking a hole in the plastic AND you won't risk sucking up air if you slip a bit while trying to balance the bag AND your syringe.

Everyone has their own tek. But I prefer this one so I can focus my concentration in sucking up my spore water, rather than balancing the bag and syringe at the same time.

Other note: Don't worry about the spores stuck to the bag. They won't matter that much if you have enough on the card.

Good luck Chris and welcome to Shroomery!

-Tokey


Post Extras: Print Post  Remind Me! Notify Moderator
Offlinetokey666
Lamb of God
 User Gallery

Registered: 08/05/05
Posts: 630
Loc: Your Mom
Last seen: 10 years, 8 months
Re: making syringes [Re: tokey666]
    #4675637 - 09/18/05 12:01 AM (12 years, 5 days ago)

Looks like we posted at the same time.

I also get my prints from FSR Canada. No worries! My first few I did the poke in the bag way, no contams so far. They are good ppls.


Post Extras: Print Post  Remind Me! Notify Moderator
Offlinechris92346
Stranger
Registered: 09/10/05
Posts: 436
Last seen: 7 years, 7 months
Re: making syringes [Re: tokey666]
    #4675980 - 09/18/05 01:29 AM (12 years, 5 days ago)

I am currious how this is gonna work. I did just about everything right but... thinking about it now... I think I touched the sides of the syringe to the inside of the bag. Hopefully that wasn't enough to mess it up.


Post Extras: Print Post  Remind Me! Notify Moderator
OfflineShdwstr
FSRCanada
Male

Registered: 02/18/01
Posts: 2,156
Loc: Ontario, Canada
Last seen: 3 years, 8 months
Re: making syringes [Re: chris92346]
    #4676428 - 09/18/05 03:21 AM (12 years, 5 days ago)

Hi Guys!

I can vouch for the bags that your FSRC prints come in, are sterile. They were purchased as such. The prints however are donated, so there is always a chance the print "could" be contamed. So far though, in 4 years, this has not been a big problem.

Here's a little tip that might help when making your syringes with the bags.
If your using a new sterile syringe, it doesn't matter if it touches the inside of the bag or the spore solution, so don't put on the needle until after you have filled the syringe. No more poked through baggies.
If your using a re-used syringe, you should have sterilized it first anyway. But... just to be on the safe side you can wipe the exterior on the syringe with an alcohol wipe (and let it dry) before filling your syringe. Then put on your sterile needle.
It's very easy, very quick, and very little chance of contamination.

Which you will all see under the microscope :smile:

Shdwstr


Post Extras: Print Post  Remind Me! Notify Moderator
Jump to top. Pages: 1

Amazon Shop: Microscope

Mushrooms, Mycology and Psychedelics >> Mushroom Cultivation

Similar ThreadsPosterViewsRepliesLast post
* Making syring by placing whole foil print into jar of sterilized water?
( 1 2 all )
ozzysmygod 3,513 34 01/13/09 02:55 PM
by InTheRainySeason
* question regarding water used for making syring.... vescudero0 840 4 05/02/06 04:08 PM
by thenewguy05
* A *beginner friendly* method for making Liquid Culture
( 1 2 3 4 ... 56 57 )
_OttO_ 227,384 1,136 08/08/17 08:17 PM
by bodhisatta
* No glove box...making syringes? Best way?
( 1 2 all )
myndreach 2,644 20 01/12/10 07:40 PM
by noobieshroomie
* Getting ready to make my first spore syring fromthemoon 7,155 10 06/29/07 10:49 PM
by wikedferret
* one syring per print with this tek? ismokeweed 2,330 13 02/06/08 01:06 AM
by Cyber
* confused when making a syringe from print. Mdubya 1,342 12 12/12/02 04:52 PM
by KegTheRipper
* I'm getting pissed off @ syringe making! phrozendata 1,454 14 04/16/02 02:07 AM
by slopy2nds

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: Magash, Shroomism, george castanza, RogerRabbit, total, FooMan, 13shrooms, stonesun, cronicr, PussyFart, Tmethyl, Pastywhyte, bodhisatta
352 topic views. 26 members, 94 guests and 21 web crawlers are browsing this forum.
[ Toggle Favorite | Print Topic | Stats ]
Search this thread:
Original Seeds Store - Cannabis Seeds
Please support our sponsors.

Copyright 1997-2017 Mind Media. Some rights reserved.

Generated in 0.022 seconds spending 0.003 seconds on 19 queries.