|
 Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
 robbster
Stranger
Registered: 11/08/04
Posts: 107
Loc: Chicago, IL
Last seen: 15 years, 13 days
|
 Plexiglass Lid 
#3431284 - 12/01/04 02:15 AM (19 years, 4 months ago) |
|
|
I have a 55 gallon glass aquarium that i plan on using for a fruiting chamber and im looking to add a plexiglass lid...
1) can i just drill holes in the plexiglass (and fill with Polyfil for air exchange)?
If not, how do i put the hoses for the PMP setup?
Any other suggestions with setting up an actual aquarium/terrarium...
--------------------
- Robb
"This is the trip, this is the best part."
-Jim Morrison
Bio:
    
First Grow Log
Edited by robbster (12/01/04 02:17 AM)
|
 Super_Blunt
Candyman
Registered: 10/25/04
Posts: 3,140
|
Re: Plexiglass Lid [Re: robbster]
#3431299 - 12/01/04 02:27 AM (19 years, 4 months ago) |
|
|
I only have a 20 gallon, 55 gallon are more 3l173 :*(
--------------------
|
robbster
Stranger
Registered: 11/08/04
Posts: 107
Loc: Chicago, IL
Last seen: 15 years, 13 days
|
|
i actually just cleaned it out. It used to be my iguana's cage but he is too big to inhibit it so he just chills on a table...
--------------------
- Robb
"This is the trip, this is the best part."
-Jim Morrison
Bio:
First Grow Log
|
Psychoslut
The Mother Fucking Bear-o-dactyl
Registered: 12/10/02
Posts: 20,917
Loc: all up in ya
|
Re: Plexiglass Lid [Re: robbster]
#3431310 - 12/01/04 02:32 AM (19 years, 4 months ago) |
|
|
make the plexi glass lid, and drill holes in it to run the small air hose through, 1/8 drill bit will work.
--------------------
[quote]KristiMidocean said:
Good now thats clear.WHO FUCKING CARES. If I am fat u all keep pointing it out like its suppose to be a secret.LIke u really have nothing better to do then make fat jokes. If o know its like I do I know yall can come up with NEW AND BETTER SHIT . This shit is old and boring . I left in the first place cause this shit got boring not because of the fat jokes . Fat jokes dont bother me but seriously its old[/quote]
|
Super_Blunt
Candyman
Registered: 10/25/04
Posts: 3,140
|
|
that looks like it could be a dream terrarium.
--------------------
|
Psychoslut
The Mother Fucking Bear-o-dactyl
Registered: 12/10/02
Posts: 20,917
Loc: all up in ya
|
|
im gonna build one out of a 40 gallon breeder tank, it is short and fat, more ground space than a 55 gal standard.
--------------------
[quote]KristiMidocean said:
Good now thats clear.WHO FUCKING CARES. If I am fat u all keep pointing it out like its suppose to be a secret.LIke u really have nothing better to do then make fat jokes. If o know its like I do I know yall can come up with NEW AND BETTER SHIT . This shit is old and boring . I left in the first place cause this shit got boring not because of the fat jokes . Fat jokes dont bother me but seriously its old[/quote]
|
robbster
Stranger
Registered: 11/08/04
Posts: 107
Loc: Chicago, IL
Last seen: 15 years, 13 days
|
|
Quote:
Psychoslut said:
make the plexi glass lid, and drill holes in it to run the small air hose through, 1/8 drill bit will work.
i was plannin on adding 4 - 1/2" Holes w/ polyfil for air exchange (along with PMP), good idea or no?
Also, yea mines a 55+ Wide Tank. It should hold a good 16 cakes...
Figure 3 rows of 6...
--------------------
- Robb
"This is the trip, this is the best part."
-Jim Morrison
Bio:
First Grow Log
Edited by robbster (12/01/04 02:39 AM)
|
Super_Blunt
Candyman
Registered: 10/25/04
Posts: 3,140
|
Re: Plexiglass Lid [Re: robbster]
#3431324 - 12/01/04 02:36 AM (19 years, 4 months ago) |
|
|
good idea.
--------------------
|
Psychoslut
The Mother Fucking Bear-o-dactyl
Registered: 12/10/02
Posts: 20,917
Loc: all up in ya
|
Re: Plexiglass Lid [Re: robbster]
#3431326 - 12/01/04 02:37 AM (19 years, 4 months ago) |
|
|
yeah i guess, air has to get out somehow.
--------------------
[quote]KristiMidocean said:
Good now thats clear.WHO FUCKING CARES. If I am fat u all keep pointing it out like its suppose to be a secret.LIke u really have nothing better to do then make fat jokes. If o know its like I do I know yall can come up with NEW AND BETTER SHIT . This shit is old and boring . I left in the first place cause this shit got boring not because of the fat jokes . Fat jokes dont bother me but seriously its old[/quote]
|
derx
who run it
Registered: 05/29/03
Posts: 2,459
Loc: dx/dt
|
|
have fun drilling that plexi, it's not impossible but it does suck
--------------------
better living through chemistry
OVERGROW the government!!
it's not a war on drugs, it's a war on personal freedom, ok, thats what it is.
|
Super_Blunt
Candyman
Registered: 10/25/04
Posts: 3,140
|
|
my terrarium's lid was a screen, I used durable see-thru garbage bag, and have no air exchange.
--------------------
|
lesstutrey
All Weather Associate
Registered: 10/24/04
Posts: 495
Loc: Chicagoland
Last seen: 9 years, 6 months
|
|
i'd just do two myself...
|
Super_Blunt
Candyman
Registered: 10/25/04
Posts: 3,140
|
|
Lesstutrey: Have you gotten anywhere with those amanitas yet?
--------------------
|
MushroomFriend
I smell a conspiracy!
Registered: 10/12/04
Posts: 4,055
Loc: The Druid Peak Pack.
Last seen: 1 month, 8 days
|
Re: Plexiglass Lid [Re: robbster]
#3431377 - 12/01/04 03:02 AM (19 years, 4 months ago) |
|
|
55 gallon and 12 cakes? What measures does it have? I presume there can be more cakes in there.
I think you can make holes in the plexiglass, you can try a red hot nail maybe instead to make em with.
good luck
--------------------
|
Super_Blunt
Candyman
Registered: 10/25/04
Posts: 3,140
|
|
my 20 gallon can hold 12 cakes.
--------------------
|
Super_Blunt
Candyman
Registered: 10/25/04
Posts: 3,140
|
|
Quote:
MushroomFriend said:
55 gallon and 12 cakes? What measures does it have? I presume there can be more cakes in there.
I think you can make holes in the plexiglass, you can try a red hot nail maybe instead to make em with.
good luck
he said 16 cakes 
--------------------
|
MushroomFriend
I smell a conspiracy!
Registered: 10/12/04
Posts: 4,055
Loc: The Druid Peak Pack.
Last seen: 1 month, 8 days
|
|
a wtf, both even numbers! 
There probably fit more then 20 cakes in there as long as the aquarium isnt too high..
My rubbermaid which is 1,3 foot (40 cm)* 2,3 foot (80 cm) has room for 20 cakes already. And then I measure every cake is 2 inch at the bottom, and there is 2 inch between each cake!
--------------------
|
Super_Blunt
Candyman
Registered: 10/25/04
Posts: 3,140
|
|
the 50 gall. aquarium is same diamater as 20 gall. just higher, you could make 2 levels of cake storage if you are a crafte ninja.
--------------------
|
MushroomFriend
I smell a conspiracy!
Registered: 10/12/04
Posts: 4,055
Loc: The Druid Peak Pack.
Last seen: 1 month, 8 days
|
|
Yeah if the surface is the same then that would be so, but Im curious to the measurememts/size of the aquarium, I think it is longer than 2,6 and wider then 1,3. To say I think he has more surface area then my 20 cake (30 gallon) rubbermaid.
--------------------
|
Super_Blunt
Candyman
Registered: 10/25/04
Posts: 3,140
|
|
But can you see through your rubbermaid?
--------------------
|
MushroomFriend
I smell a conspiracy!
Registered: 10/12/04
Posts: 4,055
Loc: The Druid Peak Pack.
Last seen: 1 month, 8 days
|
|
Yes why? If not artificial light can be applied?
--------------------
|
tripndicular
My Minds Eye IsRhizomorphic
Registered: 08/25/02
Posts: 2,791
Loc: Bowels of HELL
|
Re: Plexiglass Lid [Re: robbster]
#3431821 - 12/01/04 08:07 AM (19 years, 4 months ago) |
|
|
Do not use plexi ... it will warp after only a couple of days exposure to high humidity enviro that mushies grow in .
LEXAN is the way to go , and yes you can drill holes in it just fine to attatch fittings and a handle .
At the pet store they have little tubing sized fittings for attaching fish pump sized tubing , then use 5 min epoxy to secure them in place .
Home depot for a cheap drawer handle , sure makes opening it easier .
The clamps ... because I used plexi the last time LEXAN is now in place on 3 tanks and no clamps .I wish you could zoom in to see the little fittings I used .I need to take some new pics and show the detail .
Good Luck
--------------------
Any information I give is not intended to aide you in the production of potentialy illegal substances !None of my exp comes from growing illegal varities , so take it as you will .
So with that said here is our mission statement .
Then the priest fell into a trance or swoon,& said unto the Queen of heaven ; Write unto us the ordeals; write unto us the rituals; write unto us the law !
|
MushroomFriend
I smell a conspiracy!
Registered: 10/12/04
Posts: 4,055
Loc: The Druid Peak Pack.
Last seen: 1 month, 8 days
|
|
Hey trinpdicular Ive had an plexiglass aquarium to raise small goldfish when I was younger. No problems!
EDIT: w00t is that a gun in that picture?
--------------------
Edited by MushroomFriend (12/01/04 08:44 AM)
|
tripndicular
My Minds Eye IsRhizomorphic
Registered: 08/25/02
Posts: 2,791
Loc: Bowels of HELL
|
|
Trust me ... IT WILL WARP . Lexan cost a few more dollars but will last a lot longer , and give a better seal . Like I said, before I knew any better I used plexi and had to use "c" clamps to keep the damn thing closed .
Yes it is a gun ... of sorts... a lighter\pipe .
--------------------
Any information I give is not intended to aide you in the production of potentialy illegal substances !None of my exp comes from growing illegal varities , so take it as you will .
So with that said here is our mission statement .
Then the priest fell into a trance or swoon,& said unto the Queen of heaven ; Write unto us the ordeals; write unto us the rituals; write unto us the law !
|
MushroomFriend
I smell a conspiracy!
Registered: 10/12/04
Posts: 4,055
Loc: The Druid Peak Pack.
Last seen: 1 month, 8 days
|
|
LOL a well, dont know if it was plexiglass exactly may have been some other kind of hard plastic.
--------------------
|
nu2mycology
trying out pooh
Registered: 09/25/04
Posts: 136
Loc: Florida USA
Last seen: 10 years, 6 days
|
Re: Plexiglass Lid [Re: robbster]
#3432010 - 12/01/04 09:18 AM (19 years, 4 months ago) |
|
|
I find that when drilling plastics or plexi-glass that there is no splintering if you first put some masking tape where you wanna drill at!!
Works great
--------------------
The author of this lies more than the government and you should not believe anything he writes!
|
MycoChode
Stranger
Registered: 10/26/04
Posts: 30
Last seen: 19 years, 2 months
|
|
Might check for a plastics retailer where you live. We use one locally all the time to get supplies at work. They carry all kinds of plastic, cut it, drill it, glue it etc... Just draw what you want on paper and they can bust it out in a few minutes.
|
tripndicular
My Minds Eye IsRhizomorphic
Registered: 08/25/02
Posts: 2,791
Loc: Bowels of HELL
|
|
The only problem I had was the lexan is bullet proof(is what banks use only 4 inches thick) , so had to use a real sharp drill bit and no other glues hold real good on it other than epoxy . The plastic melted to the drill bit due to making cut slowly had to use a razor knife to scrape it off between drillings . I love my dremel !
I had Home Depot guy cut it to size so drilling for fittings was the only thing I had to do . Make measurements about 1\16 of an inch smaller in all directions so it fits snug but not so tight you must fight with .
--------------------
Any information I give is not intended to aide you in the production of potentialy illegal substances !None of my exp comes from growing illegal varities , so take it as you will .
So with that said here is our mission statement .
Then the priest fell into a trance or swoon,& said unto the Queen of heaven ; Write unto us the ordeals; write unto us the rituals; write unto us the law !
|
|
Threaded
Previous
Index
Next
Bulk Cannabis Seeds 
Kratom Powder for Sale 
Bridgetown Botanicals 
Red Vein Kratom 
North Spore Mushroom Grow Kits & Cultivation Supplies 
Substrate Mix
Edit 
Reply 
SixTango
onetime
Shnezbit
psyphon
GaNjAShRooM
GreyMatter
iloveraving
BladeLSD