Home | Community | Message Board


Magic-Mushrooms-Shop.com
Please support our sponsors.

Mushrooms, Mycology and Psychedelics >> Mushroom Cultivation

Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Amazon Shop for: ½ Pint Jars, 10cc Syringe, Air Pump, Aquarium Heater

Jump to first unread post. Pages: 1 | 2 | Next >  [ show all ]
OfflineMachmood
Stranger
Registered: 11/10/04
Posts: 184
Last seen: 11 years, 9 months
PMP mod, think its pretty good idea
    #3350243 - 11/12/04 06:49 AM (12 years, 2 months ago)

I have not made my PMP yet(making it today) but i am going to copy the PMP i linked below exactly. I was thinking about his light source, but wondered how he was going to turn it off each night, becasue it is battery powered. He would ahve to take the top off completly once each day,losing alot of moisture. I was thinkinga bout cutting a hole in the top and placing a terarium top on it, with the built in light and flap. This will alow u to control ur light from an outside switch not opening ur container, and givein u alittle flap to open to check on ur harvest without once againopening ur hwole container. This PMP is an absolute beast, great job with the pics and showing begginrers liek me how its done, also if neo ne has ne further mods let me know, always looking for a way to improve

Heres the PMP im refering to http://www.shroomery.org/forums/showflat.php/Cat/0/Number/3337253/an/0/page/8


Post Extras: Print Post  Remind Me! Notify Moderator
InvisibleSam1912
journeyman

Registered: 09/23/04
Posts: 2,142
Loc: Cali
Re: PMP mod, think its pretty good idea [Re: Machmood]
    #3350266 - 11/12/04 07:07 AM (12 years, 2 months ago)

hmm.. sounds like a good idea. I think a lot of people think so, too, since they are doing that already.. sort of... Some use straight plexi as the lid and throw the old lid away altogether.



I suppose I can use one of those hood lamps if I wanted to... but...



I use 7w night lights I got from 99 cent stores. I also control them using X10 hooked up to my computer to turn on and off on schedule I put in.

Good thinkin', though.

Sam


--------------------
Protect your civil rights!  End drug prohibition.  And if you don't care about your civil rights, protect mine!

If you want a rating from me, please PM me.  For those really newbies, don't expect an answer back, but you can try me anyways.


Post Extras: Print Post  Remind Me! Notify Moderator
OfflineRamlaen
Pysconaut
 User Gallery

Registered: 11/06/04
Posts: 638
Last seen: 6 years, 1 month
Re: PMP mod, think its pretty good idea [Re: Sam1912]
    #3350280 - 11/12/04 07:23 AM (12 years, 2 months ago)

I put two blue cold cathode tube lights in mine, and attached to them a 10 dollar timer i got at a local pet store to control light cycles.


Post Extras: Print Post  Remind Me! Notify Moderator
OfflineMachmood
Stranger
Registered: 11/10/04
Posts: 184
Last seen: 11 years, 9 months
Re: PMP mod, think its pretty good idea [Re: Ramlaen]
    #3350286 - 11/12/04 07:27 AM (12 years, 2 months ago)

seems easier to just use plexi glass or something. You think its better to use a strong plastic type material to put over the whole or a solid piece of plexi glass, also i prob wont need a lamp and can save some electrisity.....


Post Extras: Print Post  Remind Me! Notify Moderator
InvisibleSam1912
journeyman

Registered: 09/23/04
Posts: 2,142
Loc: Cali
Re: PMP mod, think its pretty good idea [Re: Machmood]
    #3350290 - 11/12/04 07:30 AM (12 years, 2 months ago)

Yeah.. Hyphae uses Plexi. I think it looks more neat(orderly) and gives a largest window possible for lighting.

Sam


--------------------
Protect your civil rights!  End drug prohibition.  And if you don't care about your civil rights, protect mine!

If you want a rating from me, please PM me.  For those really newbies, don't expect an answer back, but you can try me anyways.


Post Extras: Print Post  Remind Me! Notify Moderator
OfflineMachmood
Stranger
Registered: 11/10/04
Posts: 184
Last seen: 11 years, 9 months
Re: PMP mod, think its pretty good idea [Re: Sam1912]
    #3350295 - 11/12/04 07:33 AM (12 years, 2 months ago)

hey sam thanx alot for answering all my newbie qustions, been on this comp for liek 24 hours straight doing research, and as u assume di have another question, for now. In the post i linked it says 2 air pumps, one is hooked up to blue things stuck tot he bottom(what r those) and the other one i gues drill holes about 10 inches above the bottom holes and just let the hose dangle in the air??? also theres no heating i noticed in the PMP , what do the mushroom gods just look down on my PMP and make sure its the right temp??


Post Extras: Print Post  Remind Me! Notify Moderator
OfflineRamlaen
Pysconaut
 User Gallery

Registered: 11/06/04
Posts: 638
Last seen: 6 years, 1 month
Re: PMP mod, think its pretty good idea [Re: Machmood]
    #3350300 - 11/12/04 07:41 AM (12 years, 2 months ago)

If you are in a area where temps fluctuate, add an aquarium heater under the rocks to regulate it. Many people have done that.

From what i seen most pmps only use one pump hooked up to bubble wands. These you can find at any fish store and just produce bubbles.(these are the blue stick things)

Look here for the original creator of this wonderful contraption
http://www.shroomery.org/index/par/25056


Edited by Ramlaen (11/12/04 07:43 AM)


Post Extras: Print Post  Remind Me! Notify Moderator
InvisibleSam1912
journeyman

Registered: 09/23/04
Posts: 2,142
Loc: Cali
Re: PMP mod, think its pretty good idea [Re: Machmood]
    #3350304 - 11/12/04 07:43 AM (12 years, 2 months ago)

Most of us use 2 or more wands. If you get a pump with dual outlet, you will have enough air to use 2 wands. Those blue thins on the bottom are the air wands. Those are actually long stones, but I suggest you get the wands. They blow more even bubbles.

10"?? don't put 10" holes anywhere. That's way too big to maintain RH. Just drill 2 large enough holes as high as you can through the sides so you can put the air tubes through. I use rubber cement to seal them off as well, so the air has to go all the way up and out through the gaps between the tub and the lid.

Heating? Use an aquarium heater submerged on the bottom. Just make sure you have enough water to completely cover the heater and geolite or whatever you are using is at least 1" above the waterline.

Here's the original thread. There's a lot of mod ideas in there. The holes they talk about is really unncessary. Let's call that tried and proven to make no difference.

Poormans Pod(PMP) by Magash

Sam


--------------------
Protect your civil rights!  End drug prohibition.  And if you don't care about your civil rights, protect mine!

If you want a rating from me, please PM me.  For those really newbies, don't expect an answer back, but you can try me anyways.


Post Extras: Print Post  Remind Me! Notify Moderator
OfflineMachmood
Stranger
Registered: 11/10/04
Posts: 184
Last seen: 11 years, 9 months
Re: PMP mod, think its pretty good idea [Re: Sam1912]
    #3350317 - 11/12/04 07:52 AM (12 years, 2 months ago)

hahah 10 INCHES above the bottom filter holes. When usign 2 filters im assuming the one filter goes tot he wonds, and about 10 inches above the holes for the wands I GUESS u put 2 more holes and just feed the hose in there and let it dangle??? the PMP only shows wands but call me kido built a bigger one and said to use 2 air pumps(profile 5500) n i correct in this assumption?


Post Extras: Print Post  Remind Me! Notify Moderator
InvisibleSam1912
journeyman

Registered: 09/23/04
Posts: 2,142
Loc: Cali
Re: PMP mod, think its pretty good idea [Re: Machmood]
    #3350333 - 11/12/04 08:03 AM (12 years, 2 months ago)

He's using 4 stones. 2 on bottom of the tub and 2 on top of the geolite. Don't use the 2 on top of the geolite. The extra air line like that would be ideal for casings because it does lower the RH a little(89-92%) and provides lot more air flow. And you can use only 1 profile 5500 for upto 60gal tub.

Good luck

Sam


--------------------
Protect your civil rights!  End drug prohibition.  And if you don't care about your civil rights, protect mine!

If you want a rating from me, please PM me.  For those really newbies, don't expect an answer back, but you can try me anyways.


Post Extras: Print Post  Remind Me! Notify Moderator
OfflineMachmood
Stranger
Registered: 11/10/04
Posts: 184
Last seen: 11 years, 9 months
Re: PMP mod, think its pretty good idea [Re: Sam1912]
    #3350338 - 11/12/04 08:06 AM (12 years, 2 months ago)

Sam is def the man!! if i were u id stop answering my question, or ill just keep asking


Post Extras: Print Post  Remind Me! Notify Moderator
InvisibleSam1912
journeyman

Registered: 09/23/04
Posts: 2,142
Loc: Cali
Re: PMP mod, think its pretty good idea [Re: Machmood]
    #3350343 - 11/12/04 08:08 AM (12 years, 2 months ago)

keep asking. I feel better when people ask than to go do something stupid and then post a desperate plea for prayers...

Sam


--------------------
Protect your civil rights!  End drug prohibition.  And if you don't care about your civil rights, protect mine!

If you want a rating from me, please PM me.  For those really newbies, don't expect an answer back, but you can try me anyways.


Post Extras: Print Post  Remind Me! Notify Moderator
OfflineMachmood
Stranger
Registered: 11/10/04
Posts: 184
Last seen: 11 years, 9 months
Re: PMP mod, think its pretty good idea [Re: Sam1912]
    #3350349 - 11/12/04 08:13 AM (12 years, 2 months ago)

ive been at my comp for a long asss time, gotta gog et some sleep, to excited to buil my PMP today, one last question before i retire myself for a few hours. I irdered 2 10cc of thilain koh samurai about how much weight will this produce dried using strictly cakes(possibly splitting 10cc syringe to cakes n one 10cc to casing. Im looking to get one fairly large container( not sure in gallons but about the size in the link i showed u, pretty big, i mean i really have no clue about yields and stuff, but u think in a container liek that i could get 2 lbs?? how many syringes would this take of 10cc


Post Extras: Print Post  Remind Me! Notify Moderator
Offlinediscman1
journeyman
Registered: 08/24/04
Posts: 962
Last seen: 12 years, 1 month
Re: PMP mod, think its pretty good idea [Re: Machmood]
    #3350353 - 11/12/04 08:14 AM (12 years, 2 months ago)

3 - 7 grams dry per cake per flush.

Unless you're Sam.

:tongue:


Post Extras: Print Post  Remind Me! Notify Moderator
InvisiblePsychoslut
The Mother Fucking Bear-o-dactyl
 User Gallery
Registered: 12/10/02
Posts: 20,807
Loc: all up in ya
Re: PMP mod, think its pretty good idea [Re: Sam1912]
    #3350354 - 11/12/04 08:14 AM (12 years, 2 months ago)

so did i over kill by buying a 9500 for a 73 qt container :crazy:?


--------------------



[quote]KristiMidocean said:
Good now thats clear.WHO FUCKING CARES. If I am fat u all keep pointing it out like its suppose to be a secret.LIke u really have nothing better to do then make fat jokes. If o know its like I do I know yall can come up with NEW AND BETTER SHIT . This shit is old and boring . I left in the first place cause this shit got boring not because of the fat jokes . Fat jokes dont bother me but seriously its old[/quote]


Post Extras: Print Post  Remind Me! Notify Moderator
OfflineMachmood
Stranger
Registered: 11/10/04
Posts: 184
Last seen: 11 years, 9 months
Re: PMP mod, think its pretty good idea [Re: Sam1912]
    #3350357 - 11/12/04 08:15 AM (12 years, 2 months ago)

saw ur post int he sticky of yeilds n prices, wondering strictly for my construction of my terrarium and how big i should go for the yields i would liek to see, didnt mean to break ne rules or nething


Post Extras: Print Post  Remind Me! Notify Moderator
OfflineMachmood
Stranger
Registered: 11/10/04
Posts: 184
Last seen: 11 years, 9 months
Re: PMP mod, think its pretty good idea [Re: discman1]
    #3350363 - 11/12/04 08:17 AM (12 years, 2 months ago)

couldi get 10 1/2 pint jars from a 10cc and see good results or it needs more?


Post Extras: Print Post  Remind Me! Notify Moderator
Offlinediscman1
journeyman
Registered: 08/24/04
Posts: 962
Last seen: 12 years, 1 month
Re: PMP mod, think its pretty good idea [Re: Machmood]
    #3350366 - 11/12/04 08:18 AM (12 years, 2 months ago)

Using 0.25cc/hole, you can inoculate at least 36 jars with a 10cc syringe IMO.


Post Extras: Print Post  Remind Me! Notify Moderator
InvisibleSam1912
journeyman

Registered: 09/23/04
Posts: 2,142
Loc: Cali
Re: PMP mod, think its pretty good idea [Re: Machmood]
    #3350367 - 11/12/04 08:19 AM (12 years, 2 months ago)

Don't worry about yields.  It'll give you what it'll give you. :wink:

Just measure the diameter of your jars and add 2" gaps between them and another 1.5" on the outside.  Set the jars up like when you used to play with GI Joe action figures and see what dimenstion tub you need. :wink:

Good luck

Sam


--------------------
Protect your civil rights!  End drug prohibition.  And if you don't care about your civil rights, protect mine!

If you want a rating from me, please PM me.  For those really newbies, don't expect an answer back, but you can try me anyways.


Post Extras: Print Post  Remind Me! Notify Moderator
InvisibleSam1912
journeyman

Registered: 09/23/04
Posts: 2,142
Loc: Cali
Re: PMP mod, think its pretty good idea [Re: discman1]
    #3350371 - 11/12/04 08:21 AM (12 years, 2 months ago)

Unless you do a liquid tek, no.  .25cc per site, and 4 sites per jar meand 1cc per jar.  That's 10 cc/1cc per jar = 10 jars.  And account for some for sterilization, you get 6-8 jars. :wink:

Sam


--------------------
Protect your civil rights!  End drug prohibition.  And if you don't care about your civil rights, protect mine!

If you want a rating from me, please PM me.  For those really newbies, don't expect an answer back, but you can try me anyways.


Post Extras: Print Post  Remind Me! Notify Moderator
Jump to top. Pages: 1 | 2 | Next >  [ show all ]

Amazon Shop for: ½ Pint Jars, 10cc Syringe, Air Pump, Aquarium Heater

Mushrooms, Mycology and Psychedelics >> Mushroom Cultivation

Similar ThreadsPosterViewsRepliesLast post
* NEW ALTERED PMP TEK CHAMBER IDEA...is it possible?? supershroombros 1,545 16 08/01/06 09:41 AM
by nonsqtr
* PMP Mod vermonster 651 4 11/17/03 06:02 PM
by Demiurge
* PMP Mod - Electrical Question ethnoeste 546 4 11/05/06 12:39 AM
by RogerRabbit
* Using Hydroton/Geolite To Humidify Instead Of Perlite?! Tumbz 3,427 9 03/29/08 07:07 PM
by buggas
* Geolite for a FC with casings ski 763 9 11/06/07 08:32 PM
by sproket13
* how i made my PMP... sproket13 838 15 10/18/07 02:59 AM
by Mepher
* Birthing and PMP Questions? Noobey 790 5 05/06/09 03:08 AM
by Dudester67
* pmp inside of rack setup, will this work ? pshawny 280 1 09/27/04 08:25 PM
by george castanza

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: Magash, Shroomism, george castanza, Prisoner#1, RogerRabbit, Citric, total, FooMan, 13shrooms, stonesun, EvilMushroom666, cronicr, PussyFart, Tmethyl
1,792 topic views. 24 members, 152 guests and 37 web crawlers are browsing this forum.
[ Toggle Favorite | Print Topic | Stats ]
Search this thread:
Mycohaus
Please support our sponsors.

Copyright 1997-2017 Mind Media. Some rights reserved.

Generated in 0.073 seconds spending 0.004 seconds on 16 queries.