|
verum subsequentis
seeker of truth



Registered: 03/22/16
Posts: 8,732
Last seen: 1 year, 11 months
|
Re: Post Your New Tools Of The Trade. [Re: Failboat] 1
#27282748 - 04/26/21 01:58 PM (3 years, 22 days ago) |
|
|
I just roll some card board into the right diameter and tape it. Slide it in the bags like roger did with the can. Works wonderfully
|
DigDug
Cultivator


Registered: 05/05/20
Posts: 201
Last seen: 10 months, 23 days
|
|
Just finished building my flow cabinet.



It's has a small workspace (18" x 18", but I don't work with bags) and cost about $350 to build. Can't wait to use it.
|
verum subsequentis
seeker of truth



Registered: 03/22/16
Posts: 8,732
Last seen: 1 year, 11 months
|
Re: Post Your New Tools Of The Trade. [Re: DigDug]
#27284879 - 04/28/21 08:52 AM (3 years, 20 days ago) |
|
|
It's beautiful. Good work.
|
DigDug
Cultivator


Registered: 05/05/20
Posts: 201
Last seen: 10 months, 23 days
|
|
Thank you verum. I wanted it Matte black, but any dust that landed on it was sticking, so I decided to put a couple coats of poly on it to make it easy to clean. Now it’s glossy black and looks like the furniture from 1990.
In the process of building this flow hood, my wife cleaned the garage and damaged the HEPA filter. It really doesn’t take much to ruin a HEPA. I had to order a new filter and I still have the damaged one with a couple of small holes. I know you can repair Hepas, I just didn’t feel like doing it. [/
I will happily ship this to another shroomery member if you pay the shipping. If someone has time to fix it, it could work well. It still has a 9” x 12” hole-free workspace. I know you can fill the holes with hot glue if you have the time. PM me if you want it.
|
verum subsequentis
seeker of truth



Registered: 03/22/16
Posts: 8,732
Last seen: 1 year, 11 months
|
Re: Post Your New Tools Of The Trade. [Re: DigDug]
#27284905 - 04/28/21 09:20 AM (3 years, 20 days ago) |
|
|
Just a dab of rtv and it's good to go.
|
Munchauzen


Registered: 06/22/11
Posts: 14,346
|
|
thats gotta be rough on the lungs 😉
|
BSUUF2
derails threads



Registered: 10/15/20
Posts: 666
Loc: not that important
Last seen: 2 years, 2 months
|
Re: Post Your New Tools Of The Trade. [Re: Munchauzen]
#27284970 - 04/28/21 10:13 AM (3 years, 20 days ago) |
|
|
"...Europeans can't get big jars..."

4200ml. They're for storage, not making spawn. There's a pint jar on the right for size comparison.
Fitting about 160g dry each:
-------------------- LAGM2022
|
Hobbit GDF
Deadhead


Registered: 02/14/19
Posts: 3,489
Loc: Terrapin station
|
Re: Post Your New Tools Of The Trade. [Re: BSUUF2]
#27284999 - 04/28/21 10:39 AM (3 years, 20 days ago) |
|
|
Man my filter has all kind of holes that I just covered in silicone and it works perfect. I have a new filter in box that I havent changed out yet. Been a year. I'm lazy. But the old siliconed filter is just fine.
|
Drboomer
The lord magnificent


Registered: 09/22/19
Posts: 957
|
Re: Post Your New Tools Of The Trade. [Re: Hobbit GDF]
#27285283 - 04/28/21 03:00 PM (3 years, 20 days ago) |
|
|

Just an inkbird humidity controler, water proof fan, and pond fogger. Also picked up new calibrated gauges for both my PCs, more seals and a handle to fix my busted one. A 69 and a 74 7b and 21b still kicking and in need of a polish
I really need to spring for an ffu or flow hood. Even a small on would increase my work flow.
Edited by Drboomer (04/28/21 03:02 PM)
|
TravelAgency
The ongoing "wow"


Registered: 12/25/10
Posts: 4,431
Last seen: 1 year, 3 months
|
Re: Post Your New Tools Of The Trade. [Re: DigDug]
#27294956 - 05/05/21 02:50 AM (3 years, 13 days ago) |
|
|
Quote:
DigDug said: Just finished building my flow cabinet.



It's has a small workspace (18" x 18", but I don't work with bags) and cost about $350 to build. Can't wait to use it.
Quote:
DigDug said: Thank you verum. I wanted it Matte black, but any dust that landed on it was sticking, so I decided to put a couple coats of poly on it to make it easy to clean. Now it’s glossy black and looks like the furniture from 1990.
In the process of building this flow hood, my wife cleaned the garage and damaged the HEPA filter. It really doesn’t take much to ruin a HEPA. I had to order a new filter and I still have the damaged one with a couple of small holes. I know you can repair Hepas, I just didn’t feel like doing it. [/
I will happily ship this to another shroomery member if you pay the shipping. If someone has time to fix it, it could work well. It still has a 9” x 12” hole-free workspace. I know you can fill the holes with hot glue if you have the time. PM me if you want it.
Looks great! I've successfully used a hot glue gun to fix damages to my filter.
|
bonesmacgyver
Stranger

Registered: 05/06/21
Posts: 7
Last seen: 2 years, 10 months
|
Re: Post Your New Tools Of The Trade. [Re: TravelAgency]
#27297379 - 05/06/21 05:48 PM (3 years, 12 days ago) |
|
|
|
Eugene Gesuale
Jar-Sniffer



Registered: 04/12/20
Posts: 1,920
Loc: The Basement
Last seen: 1 year, 1 month
|
Re: Post Your New Tools Of The Trade. [Re: bonesmacgyver]
#27297390 - 05/06/21 05:55 PM (3 years, 12 days ago) |
|
|
Anybody buy their lab supplies from grainger?
-------------------- Everything in life is a trade-off. All posts made by this account are purely satirical in nature.
|
Drboomer
The lord magnificent


Registered: 09/22/19
Posts: 957
|
Re: Post Your New Tools Of The Trade. [Re: bonesmacgyver]
#27297415 - 05/06/21 06:10 PM (3 years, 12 days ago) |
|
|
So you are making a biopsy transfer tool?
|
micelio
Song of Silence


Registered: 04/22/14
Posts: 1,547
|
Re: Post Your New Tools Of The Trade. [Re: bonesmacgyver]
#27297468 - 05/06/21 06:44 PM (3 years, 12 days ago) |
|
|
Quote:
bonesmacgyver said:

This is my version..
Very simple to used and short cooling time after I torch the end of the tool.
5 inch stainless steel blunt tip Luers Lock.. Ram rod wire epoxy to bamboo handle..
I use this tool when I need to transfer a very small piece of mycelium.


The plate on the left you can see where I took the plug.. The plate on the right you can see where I placed the plug..
|
Justweed
Bobby's short shorts



Registered: 04/01/20
Posts: 555
Last seen: 2 months, 17 days
|
Re: Post Your New Tools Of The Trade. [Re: micelio]
#27298376 - 05/07/21 09:10 AM (3 years, 11 days ago) |
|
|
Geeze, I fill my jars with a 1 quart Dicky's BBQ cup! The cup is a quart and plastic, so I just dip it into my tote of corn, fill it to where I know it's 3/4 full, dump into the quart jar. I can fill 20 jars in about 2 minutes. That's probably the easiest part of my corn days!
With the dehydrators, I'm kinda bad with them...I bought 4 at Walmart, I took the trays from 1 and cut out the screen on the trays without the little handles, and put the base back in the box. It's in my closet waiting for the other base to fail one of these days, but you could definitely return it if you wanted to. Doing that I doubled the capacity, I can fit a very decent amount in each dehydrator, since I bought 4 I can run 2 at once with 2x capacity. Works better than a home depot bucket!
--------------------
  Keep 'em high and tight guys....
|
Failboat
Fuck Up
Registered: 02/01/18
Posts: 8,736
Last seen: 25 days, 10 hours
|
Re: Post Your New Tools Of The Trade. [Re: Justweed]
#27299417 - 05/07/21 10:24 PM (3 years, 11 days ago) |
|
|
Sounds like a waste. Get one decent rear mounted unit and be happy.
|
TedsDead



Registered: 01/03/17
Posts: 5,012
|
Re: Post Your New Tools Of The Trade. [Re: Failboat]
#27300316 - 05/08/21 03:29 PM (3 years, 10 days ago) |
|
|
I bought a sweet rear mounted SS one a few years ago and the fan bushing wore out. I cant find a replacement part anywhere. it still works great but I cant stand the noise that it makes now. the brand was TSM(the sausage maker company) anyone know where I might find a replacement bushing?
-------------------- weed gets you through times of no money better than money gets you through times of no weed... -the fabulous furry freak bros If you can buy it, you can burn it!
https://www.shroomery.org/forums/showflat.php/Number/25947396#25947396
|
sandman420
Saint PP



Registered: 06/17/04
Posts: 5,384
|
Re: Post Your New Tools Of The Trade. [Re: TedsDead]
#27300520 - 05/08/21 05:45 PM (3 years, 10 days ago) |
|
|
CUSTOMER SERVICE CALL 1-716-824-5814
|
natedawgnow
Rocky mountain hood rat



Registered: 02/09/15
Posts: 8,940
Loc: ation
|
Re: Post Your New Tools Of The Trade. [Re: sandman420]
#27300531 - 05/08/21 05:51 PM (3 years, 10 days ago) |
|
|
Skate shops haha. Can find bushings of all sizes and densities.
--------------------
|
TravelAgency
The ongoing "wow"


Registered: 12/25/10
Posts: 4,431
Last seen: 1 year, 3 months
|
Re: Post Your New Tools Of The Trade. [Re: natedawgnow]
#27301033 - 05/09/21 03:01 AM (3 years, 9 days ago) |
|
|
Quote:
natedawgnow said: Skate shops haha. Can find bushings of all sizes and densities.
Oh shit what's up Nate? Long time no see!
|
|