|
Loppy1512
Registered: 07/20/20
Posts: 184
Loc: Ommmmmm
Last seen: 19 hours, 27 minutes
|
First mini monos - too dry?
#26971452 - 10/06/20 12:14 AM (3 years, 3 months ago) |
|
|
I've got 3 mini monos running based on Pasty's EZ monos - 3 x 1/4in holes drilled on the long sides of the tub just above the substrate and 5 x 1/4 holes drilled at the top of the short sides of the tub
I used rye as my grain...
I spawned to bulk and put the tubs into fruiting condiitons right away with a 12/12 cycle of 6500k lights
I've read so much about fae, humidity, light, misting etc but since it's my first grow, I don't really know what I'm looking at
The photos are 2 shots of each tub, an overview and then a closeup of the sub -The first tub is NSS and was spawned to bulk on 9/27. The top of the substrate reached full colonisation after 3 days -The second tub is GT was spawned to bulk on 9/28 and reached the stage its at now after 5 days -The third tub is PESA was spawned to bulk on 9/29 and reached the stage its at now after 5 days
My question is, how do i know if the substrate is too dry by looking at it if it is covered in myc? I'm unsure as to whether i need to mist any of these tubs.... Also the NSS and GT tubs have beaded condensation on both short sides and one long side of the tub, the other long side is totally clear and I'm not sure if that means that there is not enough humidity and too much fae?
thanks!
|
Mateja


Registered: 07/14/16
Posts: 7,948
Loc: Here
|
Re: First mini monos - too dry? [Re: Loppy1512]
#26971462 - 10/06/20 12:28 AM (3 years, 3 months ago) |
|
|
Don't expect anything interesting to bwging to happen until at least 10 days after spawning, the same goes for the beads of moisture, it takes a few days for the micro climate to establish on top of the substrate. Anyway here's a pic of how surface conditions may look when experienced growers make tubs
Quote:
Mateah said:
Quote:
Munchauzen said: PE surface conditions 

Quote:
Pastywhyte said:

Clone test going well.
Surfus Kondishns 
-------------------- Cakes inside Water Tub
|
Loppy1512
Registered: 07/20/20
Posts: 184
Loc: Ommmmmm
Last seen: 19 hours, 27 minutes
|
Re: First mini monos - too dry? [Re: Mateja]
#26971603 - 10/06/20 05:40 AM (3 years, 3 months ago) |
|
|
Thanks Mateah...with all the information that's on the site, it's hard for a first time grower to process it all and know what's in front of them....
Munchaezen's tub has a lot of moisture on it and it appears to be at a similar stage to my NSS tub which has no moisture sitting on the myc...
Do you reckon that I just let the shrooms do their thing, don't mess with things...the temptation to mist is strong...
|
Vylie
The more you know

Registered: 03/11/20
Posts: 463
Last seen: 2 years, 4 months
|
Re: First mini monos - too dry? [Re: Loppy1512]
#26971609 - 10/06/20 05:54 AM (3 years, 3 months ago) |
|
|
...
Edited by Vylie (02/11/21 02:08 PM)
|
Loppy1512
Registered: 07/20/20
Posts: 184
Loc: Ommmmmm
Last seen: 19 hours, 27 minutes
|
Re: First mini monos - too dry? [Re: Vylie]
#26978053 - 10/10/20 07:12 AM (3 years, 3 months ago) |
|
|
So I'm 13 days in and thought I'd post a pic of the tub...still no signs of knots or pins
There are a few spots on the myc that are yellowish brown. Does this indicate that it is too dry?
Edited by Loppy1512 (10/11/20 06:42 AM)
|
Loppy1512
Registered: 07/20/20
Posts: 184
Loc: Ommmmmm
Last seen: 19 hours, 27 minutes
|
Re: First mini monos - too dry? [Re: Loppy1512]
#26979533 - 10/11/20 06:43 AM (3 years, 3 months ago) |
|
|
So these are next days pics...
First pins have appeared but I've noticed spots of green in the myc....is this green mold and if it is is it from being to dry?
Edited by Loppy1512 (10/11/20 10:05 AM)
|
Inspir3
Aspir3 to Inspir3


Registered: 07/06/17
Posts: 234
|
Re: First mini monos - too dry? [Re: Loppy1512]
#26980344 - 10/11/20 05:50 PM (3 years, 3 months ago) |
|
|
Looks like bruising to me. i would mist a little more seems a tad dry.
--------------------
|
Loppy1512
Registered: 07/20/20
Posts: 184
Loc: Ommmmmm
Last seen: 19 hours, 27 minutes
|
Re: First mini monos - too dry? [Re: Inspir3]
#26981462 - 10/12/20 12:34 PM (3 years, 3 months ago) |
|
|
Thanks Inspir3, i"ll give that a go and see what happens
|
|
|
You cannot start new topics / You cannot reply to topics HTML is disabled / BBCode is enabled
Moderator: Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, LogicaL Chaos, 13shrooms, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a 265 topic views. 25 members, 226 guests and 67 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ] |
|