|
Quadryder

Registered: 11/09/15
Posts: 156
Loc: Idk it's dark
|
Are my tubs too wet? 1
#26666748 - 05/12/20 02:34 PM (3 years, 8 months ago) |
|
|
Sup
I'm doing my first bulk cult and I'd like some input.
Here are 2 tubs. One is lined with no casing, the other has no liner, and had a thick casing that I scraped most of off. These tubs were made 5-1, and 4-27 for the cased one.
1-1/4" holes, 2 layers of mp tape on the sub level holes, 1 layer on the top holes. I think the 1-1/4" holes, compared to 2" is whats causing the high rh, but I don't know if this is good or bad.

 
Does the hygrometer tub have too many water droplets? It seems like a lot to me but I have no idea. The tub with the liner seems to have less water droplets, this could be due to the whole casing scraping myc holding different rh? I've put the hygrometer in the other tub and its the same 99%. I also see how dirty the tape is, maybe replacing it would help?
There is also water in the bottom of the tubs with liners.

These don't have visible water pools on the bottom.
  Some weird color shit, I think its metabolites.
Any help or tips is appreciated.
|
Kmacmo
The aborted pin



Registered: 08/14/19
Posts: 1,675
Loc: Central hemisphere
Last seen: 6 hours, 28 minutes
|
Re: Are my tubs too wet? [Re: Quadryder] 1
#26666783 - 05/12/20 02:53 PM (3 years, 8 months ago) |
|
|
Looks alright, a little to wet though.. I'd mist less and increase air exchange slightly.
Could be bacterial or maybe just abit of pooling, the water can look like pee think the coir has something to do with it.
--------------------
|
Quadryder

Registered: 11/09/15
Posts: 156
Loc: Idk it's dark
|
Re: Are my tubs too wet? [Re: Kmacmo]
#26666788 - 05/12/20 02:55 PM (3 years, 8 months ago) |
|
|
I've never misted any tubs, just peeked inside a couple times is all, just lifting the lid slightly.
|
Kmacmo
The aborted pin



Registered: 08/14/19
Posts: 1,675
Loc: Central hemisphere
Last seen: 6 hours, 28 minutes
|
Re: Are my tubs too wet? [Re: Quadryder]
#26666816 - 05/12/20 03:04 PM (3 years, 8 months ago) |
|
|
Ah then just take off a layer of tape, or replace with loose polyfil. Abit of extra air exchange is never a bad thing 
Looks like the humidity is too high for any water to evaporate, we want to introduce air to evaporate all that water on the surface.. Once it's gone we mist to replace the beads
--------------------
|
Quadryder

Registered: 11/09/15
Posts: 156
Loc: Idk it's dark
|
Re: Are my tubs too wet? [Re: Quadryder] 1
#26666819 - 05/12/20 03:05 PM (3 years, 8 months ago) |
|
|
This is about as good of a pic as I can get

|
A.k.a
Stranger



Registered: 10/27/19
Posts: 16,782
Loc: Gaming the system
Last seen: 2 hours, 22 minutes
|
Re: Are my tubs too wet? [Re: Quadryder] 1
#26666832 - 05/12/20 03:09 PM (3 years, 8 months ago) |
|
|
They seem fine to me. I think the tub with the hygrometer looks better droplet wise.
--------------------
LAGM2020     
|
Quadryder

Registered: 11/09/15
Posts: 156
Loc: Idk it's dark
|
Re: Are my tubs too wet? [Re: A.k.a]
#26666869 - 05/12/20 03:25 PM (3 years, 8 months ago) |
|
|
Thank you very much for the help. I took off a layer of tape, I can always add it back I figured.
|
Quadryder

Registered: 11/09/15
Posts: 156
Loc: Idk it's dark
|
Re: Are my tubs too wet? [Re: Quadryder]
#26674454 - 05/16/20 09:29 AM (3 years, 8 months ago) |
|
|
So I still think these look too wet what do you guys think?

 

|
FeedYourMind
indiGlo



Registered: 03/17/14
Posts: 1,155
Loc: That One Place
Last seen: 4 days, 8 hours
|
Re: Are my tubs too wet? [Re: Quadryder]
#26674460 - 05/16/20 09:37 AM (3 years, 8 months ago) |
|
|
Give em a little more FAE. Def wouldn't hurt. Good surface moisture so you can def get away with increasing FAE. Should help with pinning.
|
|
|
You cannot start new topics / You cannot reply to topics HTML is disabled / BBCode is enabled
Moderator: Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, LogicaL Chaos, 13shrooms, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a 210 topic views. 22 members, 219 guests and 35 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ] |
|