|
Hyper1ON
Stranger
Registered: 11/17/19
Posts: 9
Loc: Canada
Last seen: 4 years, 1 month
|
Pinsets comin up! Veils broken through! First-timer
#26362755 - 12/05/19 10:51 AM (4 years, 1 month ago) |
|
|
Although, it seems at all different paces.. I posted here a few days ago mentioning a small problem with possible bacterial spawn, aerial myc, seems to have cleared itself out considering some of these pins seem to be skyocketing.. although the rest are poppin up they are not at nearly the same pace, also noticed lots of fluff at the bottom of the caps, this is my first grow and jus makin sure things are up to par.
Also! I do believe the depth of my casing layer may be a bit too uneven and thick and from what I've read here:, it definitely correlates to the pinset form, although i could be very wrong considering i am using straw as the substrate, and lots of it and know that you surely do need an excess of casing to support the nutrients and such for fruits so pls help me out lol https://www.shroomery.org/forums/showflat.php/Cat/0/Number/5387531
Here's the original post for any uncovered context: https://www.shroomery.org/forums/showflat.php/Number/26357112
check it out n lemme know what you think
 
[UPDATED]
Edited by Hyper1ON (12/06/19 09:29 AM)
|
staytrippy420



Registered: 03/23/13
Posts: 2,337
Loc: Canada
|
Re: Pinsets comin up! [Re: Hyper1ON]
#26362809 - 12/05/19 11:24 AM (4 years, 1 month ago) |
|
|
They look like their stretching... For light maybe?
-------------------- Tek's I use LAGM2020
|
Hyper1ON
Stranger
Registered: 11/17/19
Posts: 9
Loc: Canada
Last seen: 4 years, 1 month
|
|
Right now I've got a 18" 6400k fluorescent bulb sitting approximately half a metre or less above container, on a timer for 12/12, not sure...
Could there be anything said for the what seems like 100 pins growing at substantially smaller sizes? It just seems a bit odd to me, so I think the reason for this could be uneven casing soil..
Edited by Hyper1ON (12/05/19 11:29 AM)
|
staytrippy420



Registered: 03/23/13
Posts: 2,337
Loc: Canada
|
Re: Pinsets comin up! [Re: Hyper1ON]
#26362833 - 12/05/19 11:42 AM (4 years, 1 month ago) |
|
|
Yeah an uneven casing will likely do that, and using MS will also likely do that. Probably a combination of both.
Just harvest them as they mature and leave the ones still growing. Re-hydrate the sub when needed (when the box feels lighter in weight)
Also looks like you got "fuzzy feet" usually an indicator you need more FAE.
Overall not bad for your first go! Congrats on the fruits
-------------------- Tek's I use LAGM2020
|
Hyper1ON
Stranger
Registered: 11/17/19
Posts: 9
Loc: Canada
Last seen: 4 years, 1 month
|
|
Awesome thanks for the optimism and understanding, great to have some reassurance. I've plugged the holes on the lid with some cotton right now to maintain FAE, they were previously closed with a plastic cover, sealing in most of the air. Hoping this will let is breathe a bit more, and I'll be on it to make sure I fan at least 3-5 times a day with a misting or two depending on your mentioned weight of box, I'll keep an eye on. Thank ya tons, it's wonderful having others in the trade who are able to give a helping hand
|
A.k.a
Stranger



Registered: 10/27/19
Posts: 16,782
Loc: Gaming the system
Last seen: 2 hours, 38 minutes
|
Re: Pinsets comin up! [Re: Hyper1ON]
#26362851 - 12/05/19 11:54 AM (4 years, 1 month ago) |
|
|
Stretching is prob from lack of air as well.
--------------------
LAGM2020     
|
staytrippy420



Registered: 03/23/13
Posts: 2,337
Loc: Canada
|
Re: Pinsets comin up! [Re: Hyper1ON]
#26362852 - 12/05/19 11:55 AM (4 years, 1 month ago) |
|
|
No worries bruh thats what Shroomery is all about.
Usually I just bottom water the sub to re-hydrate. Carful not to over mist, its a common mistake made by new growers. Keep all your readings to recent post too, theres a lot of old out dated info out there.
Good luck mane!
-------------------- Tek's I use LAGM2020
|
Hyper1ON
Stranger

Registered: 11/17/19
Posts: 9
Loc: Canada
Last seen: 4 years, 1 month
|
|
And how would one do that ? Considering my bulk substrate situation and the bulky casing I'm just not sure the humidity is even reaching the sub. Although, these are assumptions. I've been keeping misting to a minimum with a focus on FAE through short but frequent fanning and by also using ceiling fan in growroom. Hoping by tomorrow we'll have some more beautys to show off
|
Hyper1ON
Stranger

Registered: 11/17/19
Posts: 9
Loc: Canada
Last seen: 4 years, 1 month
|
Re: Pinsets comin up! [Re: Hyper1ON]
#26364601 - 12/06/19 09:28 AM (4 years, 1 month ago) |
|
|
So it looks like the veil has broken on the pictured pins above!! Whatdya think? Time to pull or should I give em another 24-48?
 
UPDATE: Total is 26 grams wet, currently dehydrating whatever seemed ready to go.
One more! It seems to have come out At 3gr.. but it's alright as it seems there's another 100 pins comin up I'll do a lil cold treatment and wait for em to pop and keep ya updated
Edited by Hyper1ON (12/06/19 06:49 PM)
|
|
|
You cannot start new topics / You cannot reply to topics HTML is disabled / BBCode is enabled
Moderator: Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, LogicaL Chaos, 13shrooms, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a 158 topic views. 26 members, 237 guests and 38 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ] |
|