|
da_wowie
Stranger
Registered: 10/04/19
Posts: 11
Last seen: 4 years, 4 months
|
Help me with unmodified monotub moisture and humidity please
#26229582 - 10/04/19 01:13 PM (4 years, 5 months ago) |
|
|
Hey everyone, hope you're all well today. I have questions about my unmodified monotub setup if I may bother you for knowledge. Also note the tub contains balance of coco coir, gypsum and vermiculite
First, when looking through the tub I can see water droplets surrounding the entire substrate. but it seems like the sides of the substrate is more wet than the surface. Also there seems to be some mycelium piss around the corners of the substrate.
I'm all 'ears'. I am just a bit confused with the humidity in the chamber. This is all quite new to me. the humidity of the room is 50-60% and i mist the sides when it seems like its drying up.
To clarify, there is moisture dripping down the sides and lid as well.
Spawn to bulk three days ago. 12/12 light schedule, lid open half an inch during the day only. Any advice would be great, pro-tips, links to articles, etc. Thank you.
|
Rot
Worlds best trichoderma farmer
Registered: 11/09/18
Posts: 908
Last seen: 2 years, 10 months
|
Re: Help me with unmodified monotub moisture and humidity please [Re: da_wowie]
#26229586 - 10/04/19 01:14 PM (4 years, 5 months ago) |
|
|
Post some pics please.
|
Psicomb
shroom or die
Registered: 01/13/18
Posts: 4,749
Loc: the womb
|
Re: Help me with unmodified monotub moisture and humidity please [Re: da_wowie]
#26229605 - 10/04/19 01:24 PM (4 years, 5 months ago) |
|
|
That issue is a result of your substrate being over field capacity. The pooling water is a result of oversaturated substrate. Can you post a picture?
-------------------- When we constantly pull things apart trying to see how it works, we may end up with only an understanding of how to destroy something - nick sand
|
da_wowie
Stranger
Registered: 10/04/19
Posts: 11
Last seen: 4 years, 4 months
|
Re: Help me with unmodified monotub moisture and humidity please [Re: da_wowie]
#26229613 - 10/04/19 01:29 PM (4 years, 5 months ago) |
|
|
Here are quite a few pictures , feedback and advice certainly welcome:
|
Psicomb
shroom or die
Registered: 01/13/18
Posts: 4,749
Loc: the womb
|
Re: Help me with unmodified monotub moisture and humidity please [Re: da_wowie]
#26229620 - 10/04/19 01:32 PM (4 years, 5 months ago) |
|
|
That ain't bad, just dab up pools of water with a paper towel, you won't hurt the grow by doing that. Yellow liquid are metabolites, nothing necessarily bad.
-------------------- When we constantly pull things apart trying to see how it works, we may end up with only an understanding of how to destroy something - nick sand
|
da_wowie
Stranger
Registered: 10/04/19
Posts: 11
Last seen: 4 years, 4 months
|
Re: Help me with unmodified monotub moisture and humidity please [Re: Psicomb]
#26229636 - 10/04/19 01:44 PM (4 years, 5 months ago) |
|
|
Ok will do! just a little worried about side pinning as well because the sides look more wet than the surface, hence the pooling of water around the sides/corners.
|
filthyknees
no coincidence
Registered: 03/08/13
Posts: 6,283
|
Re: Help me with unmodified monotub moisture and humidity please [Re: da_wowie]
#26229642 - 10/04/19 01:49 PM (4 years, 5 months ago) |
|
|
There is such a thing as over misting. If it doesn't look DRY do not mist.
There is nothing to do now, just watch it and start more projects if you have more time to kill.
-------------------- But if you're in a hurry, and really got to go If you're in a hurry, might have to find out slow That it's one thing to try and another to fly You get there quicker just a step at a time It's one thing to bark, another to bite The show ain't over till you pack up at night
|
Psicomb
shroom or die
Registered: 01/13/18
Posts: 4,749
Loc: the womb
|
Re: Help me with unmodified monotub moisture and humidity please [Re: da_wowie]
#26229677 - 10/04/19 02:05 PM (4 years, 5 months ago) |
|
|
Yeah dont worry about sidepins right now, just let it do its thing and make mental notes as it grows about what you observe. Just because theres moisture along the side of the substrate doesnt mean it's going to side pin
-------------------- When we constantly pull things apart trying to see how it works, we may end up with only an understanding of how to destroy something - nick sand
|
da_wowie
Stranger
Registered: 10/04/19
Posts: 11
Last seen: 4 years, 4 months
|
Re: Help me with unmodified monotub moisture and humidity please [Re: Psicomb]
#26229685 - 10/04/19 02:08 PM (4 years, 5 months ago) |
|
|
awesome! totally get it now, thank you!
|
Psicomb
shroom or die
Registered: 01/13/18
Posts: 4,749
Loc: the womb
|
Re: Help me with unmodified monotub moisture and humidity please [Re: da_wowie]
#26229691 - 10/04/19 02:09 PM (4 years, 5 months ago) |
|
|
for sure good luck, keep us updated
-------------------- When we constantly pull things apart trying to see how it works, we may end up with only an understanding of how to destroy something - nick sand
|
Gan
Wielder of Narya
Registered: 08/26/19
Posts: 927
Loc: Valinor
Last seen: 7 months, 25 days
|
Re: Help me with unmodified monotub moisture and humidity please [Re: Psicomb]
#26229735 - 10/04/19 02:40 PM (4 years, 5 months ago) |
|
|
|
da_wowie
Stranger
Registered: 10/04/19
Posts: 11
Last seen: 4 years, 4 months
|
Re: Help me with unmodified monotub moisture and humidity please [Re: Psicomb]
#26261191 - 10/18/19 02:39 PM (4 years, 5 months ago) |
|
|
seems like im getting some of the mycelium is turning yellow, looks kinda dry too. could it be contams or just due to drying out?
|
Cthulhu23
Elder God Extraordinaire
Registered: 07/04/18
Posts: 620
Last seen: 2 years, 8 months
|
Re: Help me with unmodified monotub moisture and humidity please [Re: da_wowie]
#26261212 - 10/18/19 02:46 PM (4 years, 5 months ago) |
|
|
Hmm, that looks a little dry to me. But the yellowing, and the extent of it, has me a little sketched out. I’d recommend misting it to try to get some more moisture. But...depending on what others say that sub may be toast due to contamination.
|
da_wowie
Stranger
Registered: 10/04/19
Posts: 11
Last seen: 4 years, 4 months
|
Re: Help me with unmodified monotub moisture and humidity please [Re: Cthulhu23]
#26261261 - 10/18/19 03:02 PM (4 years, 5 months ago) |
|
|
Yeah it seems like its drying out, im going to mist it then. hopefully its not contams, the yellowing is only happening at the corners of the cake. the middle is all white. Any extra advice or tips are welcome!
Edited by da_wowie (10/18/19 03:06 PM)
|
da_wowie
Stranger
Registered: 10/04/19
Posts: 11
Last seen: 4 years, 4 months
|
Re: Help me with unmodified monotub moisture and humidity please [Re: Cthulhu23]
#26261397 - 10/18/19 03:58 PM (4 years, 5 months ago) |
|
|
just found some small side pins on all four sides on my tub .
|
cronicr
Registered: 08/07/11
Posts: 61,436
Loc: Van Isle
Last seen: 2 years, 2 months
|
Re: Help me with unmodified monotub moisture and humidity please [Re: da_wowie]
#26261487 - 10/18/19 04:36 PM (4 years, 5 months ago) |
|
|
The yellow is from your surface drying out
-------------------- It doesn't matter what i think of you...all that matters is clean spawn I'm tired do me a favor
|
Cthulhu23
Elder God Extraordinaire
Registered: 07/04/18
Posts: 620
Last seen: 2 years, 8 months
|
Re: Help me with unmodified monotub moisture and humidity please [Re: da_wowie]
#26261579 - 10/18/19 05:16 PM (4 years, 5 months ago) |
|
|
Quote:
da_wowie said: just found some small side pins on all four sides on my tub .
That's not a huge deal - you'll still get shrooms! It also verifies that your surface was too dry.
|
da_wowie
Stranger
Registered: 10/04/19
Posts: 11
Last seen: 4 years, 4 months
|
Re: Help me with unmodified monotub moisture and humidity please [Re: Cthulhu23]
#26261715 - 10/18/19 06:24 PM (4 years, 5 months ago) |
|
|
thats relieving to hear haha. Since the top substrate is too dry how could i encourage top pinning? right now i just heavily misted the top and trying a wax paper on top to see if that'll work. anyone have experience with this casing method and if it works?
|
filthyknees
no coincidence
Registered: 03/08/13
Posts: 6,283
|
Re: Help me with unmodified monotub moisture and humidity please [Re: da_wowie]
#26262073 - 10/18/19 09:49 PM (4 years, 5 months ago) |
|
|
Every tub I've made for a long time has been cased at spawning, no brainier for surface condition buffer.
Few handfuls of left over bucket tekd coir/verm will do well to act as a buffer even under poor conditions.
Throw the wax paper away.
-------------------- But if you're in a hurry, and really got to go If you're in a hurry, might have to find out slow That it's one thing to try and another to fly You get there quicker just a step at a time It's one thing to bark, another to bite The show ain't over till you pack up at night
|
da_wowie
Stranger
Registered: 10/04/19
Posts: 11
Last seen: 4 years, 4 months
|
Re: Help me with unmodified monotub moisture and humidity please [Re: da_wowie]
#26262666 - 10/19/19 09:26 AM (4 years, 5 months ago) |
|
|
Sad news Saturdays but i just found and killed what seems to be fungus gnats this morning. there were about 9 of them and will keep an eye out for more throughout the day. This is first grow so i have no experience with what this pesky bug can/will do to my sub and fruits. Have they laid eggs? Will they cause any problems in my sub? will i be able to eat my shrooms safely when they mature?
Edited by da_wowie (10/19/19 10:01 AM)
|
filthyknees
no coincidence
Registered: 03/08/13
Posts: 6,283
|
Re: Help me with unmodified monotub moisture and humidity please [Re: da_wowie]
#26262833 - 10/19/19 10:46 AM (4 years, 5 months ago) |
|
|
Just let it ride and start thinking about your next project.
Colonization is not an involved process at all. Once you mix the sub and spawn it will be whatever it's going to be.
-------------------- But if you're in a hurry, and really got to go If you're in a hurry, might have to find out slow That it's one thing to try and another to fly You get there quicker just a step at a time It's one thing to bark, another to bite The show ain't over till you pack up at night
|
da_wowie
Stranger
Registered: 10/04/19
Posts: 11
Last seen: 4 years, 4 months
|
Re: Help me with unmodified monotub moisture and humidity please [Re: filthyknees]
#26275830 - 10/25/19 09:41 AM (4 years, 5 months ago) |
|
|
Super happy that the mushrooms are finally coming in! A quick question though, its been a week since i saw the first pin and i feel like it might be growing kinda slow. my tallest mushroom is about 1/2 inch to an inch. only reason i ask is because after looking around to see how long it takes for pins to mature, people say it takes 7-10 days.
|
da_wowie
Stranger
Registered: 10/04/19
Posts: 11
Last seen: 4 years, 4 months
|
Re: Help me with unmodified monotub moisture and humidity please [Re: da_wowie]
#26290384 - 10/31/19 06:12 PM (4 years, 4 months ago) |
|
|
ended up with 845g wet and drying them got me 61.5g! well over my expectations and wouldnt haven done it without you guys help! proud first timer here too and it was a great 2 month experience.
|
unibrowscowl
Myconfused
Registered: 09/20/19
Posts: 108
Last seen: 1 year, 6 months
|
Re: Help me with unmodified monotub moisture and humidity please [Re: da_wowie]
#26290455 - 10/31/19 06:37 PM (4 years, 4 months ago) |
|
|
Nice wowie! I've got a very similar grow going on and have been following along. This gives me a lot of hope for my harvest.
-------------------- Cat on a tin roof, dogs in a pile Nothing left to do but smile, smile, smile
|
|