|
Novacom
Stranger
Registered: 04/02/13
Posts: 33
Last seen: 3 years, 10 months
|
Re: Pastywhyte’s Ez dialed monos (moved) [Re: TonyMushrana] 1
#26579684 - 04/05/20 02:53 PM (3 years, 10 months ago) |
|
|
Another great grow with these tubs!

I added a ultrasonic humidifier to my very compact grow room, seems to have helped keep all walls of the tubs nice and moist. No fanning or misting at all this time, set and forget!
GC MS into oats, 5 quarts of dunked grains! That was 4.3 oz dry, best flush yet! Not pictured are a insane amount of side and even bottom pins!
|
nix21
Stranger



Registered: 05/29/18
Posts: 622
|
Re: Pastywhyte’s Ez dialed monos (moved) [Re: Novacom] 1
#26581571 - 04/06/20 12:04 PM (3 years, 10 months ago) |
|
|
PF redspore MS... i like optional hole for fruiting First flush :


Second:

Third:
Edited by nix21 (04/25/20 01:19 PM)
|
stagger



Registered: 05/05/19
Posts: 1,369
|
Re: Pastywhyte’s Ez dialed monos (moved) [Re: nix21]
#26595367 - 04/12/20 09:45 AM (3 years, 10 months ago) |
|
|
Here's a first for me, outside of shoeboxes or unmodded mini's. Could use a bit of practice, but I'm liking it. Here's some AA+. Thanks for posting.
|
stagger



Registered: 05/05/19
Posts: 1,369
|
Re: Pastywhyte’s Ez dialed monos (moved) [Re: stagger]
#26599902 - 04/14/20 09:14 AM (3 years, 9 months ago) |
|
|
Just an update and a question
Harvesting now

And everything looks great to me, though I slightly broke the sub while pulling from the tub. So my question, how necessary is dunking if I'm only aiming for 1 more flush?? Just tryin to do as little damage as possible. Thanks
|
fahtster
Now With 33%More Faht



Registered: 06/17/06
Posts: 9,284
|
Re: Pastywhyte’s Ez dialed monos (moved) [Re: stagger] 1
#26600529 - 04/14/20 01:24 PM (3 years, 9 months ago) |
|
|
You can just mist it heavily instead of dunking it... or just let it go as is
Nice flush!
Faht
|
B21
PeaceLoveShrooms



Registered: 04/09/20
Posts: 871
Loc: Derby City
Last seen: 4 months, 8 days
|
Re: Pastywhyte’s Ez dialed monos (moved) [Re: fahtster]
#26636737 - 04/29/20 12:18 PM (3 years, 9 months ago) |
|
|
H
--------------------
Edited by B21 (07/03/20 04:52 PM)
|
nix21
Stranger



Registered: 05/29/18
Posts: 622
|
Re: Pastywhyte’s Ez dialed monos (moved) [Re: B21]
#26637350 - 04/29/20 06:01 PM (3 years, 9 months ago) |
|
|
I would do the same without optional hole, maybe tape 2 down cluster holes and if you need more fae you can untape it anytime..
|
SYF8
Professional Hobbyist



Registered: 11/16/19
Posts: 189
Loc: The Mars Hotel
Last seen: 3 months, 18 days
|
Re: Pastywhyte’s Ez dialed monos (moved) [Re: nix21] 1
#26646832 - 05/03/20 07:30 PM (3 years, 9 months ago) |
|
|
-------------------- Start Here and Read as Much as You Can <<< BOD’s / SHROOMERY Knowledge Index
Trade List ISO Cuban and Roatan Honduras Prints
|
ouuwee
Garden of Weeden


Registered: 03/22/20
Posts: 297
Last seen: 1 month, 8 days
|
Re: Pastywhyte’s Ez dialed monos (moved) [Re: SYF8]
#26647885 - 05/04/20 09:38 AM (3 years, 9 months ago) |
|
|
Quote:
SYF8 said: Doing the tubs

Perfect fit

Thermometer Hygrometer Meters Gauge Indoor
Do you only use the thermometer to get temperature readings? My humidity RH is always at 99% just like yours and I just don't see it as helpful information since it's most likely inaccurate
|
sillysyban
Lurker

Registered: 05/19/07
Posts: 141
Last seen: 1 month, 16 days
|
Re: Pastywhyte’s Ez dialed monotubs [Re: ouuwee]
#26668920 - 05/13/20 04:50 PM (3 years, 8 months ago) |
|
|
Hey All,
About to run my first 30 quart mini-monos. What's the verdict. After testing of this method would you prefer this setup or bigger holes with Micropore tape?
Cheers.
|
Tormato  
The Goddess Kali Meh 😛




Registered: 07/01/17
Posts: 6,067
|
Re: Pastywhyte’s Ez dialed monotubs [Re: sillysyban]
#26681339 - 05/19/20 03:01 PM (3 years, 8 months ago) |
|
|
Contributing! Slight adaptation using 56qt Sterilite, but has proven to be effective 
-------------------- Helpful Threads The Shroomery Store Tormato's Q&A Thread Post Questions Here or PM me! "Lately it occurs to me what a long, strange trip it's been." ~ Grateful Dead Before you start...Do you have a Pressure Cooker and a Dehydrator? I highly recommend getting both!
|
dmppb
On course

Registered: 11/11/11
Posts: 1,043
Loc: universe
Last seen: 3 months, 4 days
|
Re: Pastywhyte’s Ez dialed monotubs [Re: Tormato]
#26681592 - 05/19/20 05:41 PM (3 years, 8 months ago) |
|
|
Quote:
Tormato said: Contributing! Slight adaptation using 56qt Sterilite, but has proven to be effective 

nice , looks real neat
so you put MP over them ?
i forgot to post this here :
contamed tub liked the hole set up
-------------------- ...and when you loose control ; you'll reap the harvest you have sown.
|
Tormato  
The Goddess Kali Meh 😛




Registered: 07/01/17
Posts: 6,067
|
Re: Pastywhyte’s Ez dialed monotubs [Re: dmppb]
#26682148 - 05/19/20 11:00 PM (3 years, 8 months ago) |
|
|
Quote:
dmppb said: so you put MP over them ?
My wife likes to run the ceiling fan on high because it's gets too hot for her this time of year. First go around it was drying up too fast so I put a thin layer of micropore on to help maintain moisture. In a typical setting it wouldn't be needed, but it's a hurricane in my bedroom so
-------------------- Helpful Threads The Shroomery Store Tormato's Q&A Thread Post Questions Here or PM me! "Lately it occurs to me what a long, strange trip it's been." ~ Grateful Dead Before you start...Do you have a Pressure Cooker and a Dehydrator? I highly recommend getting both!
|
CosmicGiggle
Aspiring

Registered: 11/19/19
Posts: 265
|
Re: Pastywhyte’s Ez dialed monotubs [Re: Tormato]
#26683267 - 05/20/20 12:33 PM (3 years, 8 months ago) |
|
|
Tried Bodhi’s unmodified tub tek for my first grow with decent results. Gonna try pasty’s tub for my second grow. Holes are drilled and coir is prepped 
--------------------
|
JessicaRabbit88
Loveable Nerd


Registered: 09/16/19
Posts: 78
Loc: Far Far Away
|
Re: Pastywhyte’s Ez dialed monotubs [Re: nix21]
#26683341 - 05/20/20 01:14 PM (3 years, 8 months ago) |
|
|
Very happy for your success!
I spawned 3 54qt tubs this way, 5 & 6 qt grain jars to 650 coir/2qt verm (ran out), 1/4 casing layer. Will update with pics...
What was your method? Tub size?
I’ve successfully harvested 10 54qt Bod tubs (unmodified), but I’ve had problems with subsequent flushes. Substrate gets weak and crumbly and I lost 6 tubs to thrich after first flush. I was bottom watering after first harvest. Before monos, I had successfully harvested 20 shoeboxes with 3rd and 4th flushes.
What was your procedure for subsequent flushes?
FYI: my best mono yield was 2200g wet...
Edited by JessicaRabbit88 (05/20/20 01:21 PM)
|
CosmicGiggle
Aspiring

Registered: 11/19/19
Posts: 265
|
|
Quote:
JessicaRabbit88 said: Very happy for your success!
I spawned 3 54qt tubs this way, 5 & 6 qt grain jars to 650 coir/2qt verm (ran out), 1/4 casing layer. Will update with pics...
What was your method? Tub size?
I’ve successfully harvested 10 54qt Bod tubs (unmodified), but I’ve had problems with subsequent flushes. Substrate gets weak and crumbly and I lost 6 tubs to thrich after first flush. I was bottom watering after first harvest. Before monos, I had successfully harvested 20 shoeboxes with 3rd and 4th flushes.
What was your procedure for subsequent flushes?
FYI: my best mono yield was 2200g wet...
Thank you. It’s been a dream of mine for 12 years, so now that it’s reality, the excitement of getting my first fruits has resulted in quite a few nights of poor sleep. Now I’m excited for this shit to become apart of normal life so I’m not waking up to pee at 3am and having to go check out my tubs. Definitely giving them too much attention.
I should clarify that while I did everything else the same as bods tek describes, I used boot boxes (a tall shoe box so there’s no chance I’d have to dub tub it. They’re 29qt but still almost just as tall as my 64qt). They only have one latch on each short side, not two latches on each long side. If I read his tek right (highly possible I didn’t. I’m trying to cram too much information in my bong resin filled brain too fast for it to handle), the only rehydrating of the substrate occurs when bodhi harvests by filling the entire tub via bottom-watering making the sub float to the top to easily cut them down (along with misting as needed). I had problems with my sub retracting and I got quite a few side pins. I’ve bottom watered (not much, enough water so that it comes about 1/3 of the way up the sub) right after harvesting to give it a little more water and then after a few hours dumping out the excess water. I’m having trouble balancing the moisture content cause I’ve been teetering between signs of too much hydration and too little hydration.
I should note that while I followed bods coir prep procedure to a T, the amount of water he says to use brought my coir above field capacity so I squeezed the water out by the handful as I was putting it in the tub to spawn. But, my sub dried up enough for the sides to retract so maybe I should have left the coir on the wetter side instead of squeezing out all the excess water before spawning.
This was my first grow ever so I’m not the person to be asking really. I’m doing my best to mist and fan when I feel like it’s necessary, but my “feeling” for how shit needs to be isn’t developed yet.
But, I did get a decent second flush, not as big as the first but I’d say the second flush was about 75% on both my tubs. my 3rd flush is starting to pin now. I didn’t weigh them while they were wet. Was too lazy and didn’t care enough. It was my first grow so I was just excited and happy enough to get half a tub sporting a canopy. Btw idk if it has to do with environment or genetics or what, but on both my tubs one side pinned a few days before the other side which you can see evidence of in the pictures. The tubs get rotated regularly so . The mushrooms themselves looked normal, except they were very small. 2-3 inches in height and the second flush was only slightly better, maybe 2.5-3.5 inch fruits. Hoping the third flush gives me some fattys. I didn’t snap pics of the second flush but I did of the first. My gt tub

And my PESH tub

I’ll start weighing my shit when I harvest (I’ll try to anyways. I’m not selling this shit. just getting enough for personal use so I’m not really super concerned about pulling as much weight as possible) but between the first two flushes I know I got a over couple ounces of my PESH after they dried. No idea about the GT, the second I pulled them out of the dehydrator I turned them all into dust and capsuled them for microdoses and don’t feel like counting them all to do the math.
On the subject of these pasty tubs- I didn’t have much spawn, but the jars I had ready needed to be spawned last week so I just went ahead and mixed 2 qts of GT spawn with 2.5qts PESH spawn and mixed them all up together in the same tub. Didn’t have anymore boot boxes and didn’t go out and buy more today, and wanted to see what would happen since I was about to just throw the jars out anyways. I’ll post results in a couple weeks
--------------------
|
SYF8
Professional Hobbyist



Registered: 11/16/19
Posts: 189
Loc: The Mars Hotel
Last seen: 3 months, 18 days
|
Re: Pastywhyte’s Ez dialed monotubs [Re: CosmicGiggle]
#26693820 - 05/24/20 09:40 PM (3 years, 8 months ago) |
|
|
I’ve got a good pin set, but I think it’s stalled, no good action for about a week. I didn’t do the extra FAE hole. Do you guys think I should crack the lid? I did two tubs, PESA and TOC. PESA has already done its thing and it was about 40% tub coverage around the edges and barren in he center.

-------------------- Start Here and Read as Much as You Can <<< BOD’s / SHROOMERY Knowledge Index
Trade List ISO Cuban and Roatan Honduras Prints
|
jbgtaa
extraterrestrial



Registered: 06/09/19
Posts: 1,785
Last seen: 3 years, 3 months
|
Re: Pastywhyte’s Ez dialed monotubs [Re: SYF8]
#26693929 - 05/24/20 11:01 PM (3 years, 8 months ago) |
|
|
Those all look to be aborted if not contaminated. How old is that picture? Looks like they tried to fruit and gave up, I see veil formation but no maturity. Looks like the conditions weren’t optimal for the mushrooms to fully mature to me, less like contamination in my opinion
I could be totally wrong tho
-------------------- If the thunder don't get ya, the lightning will. In another time's forgotten space, your eyes looked through your mother's face. Trade List Forever giving away prints. PM at anytime for a free print.
|
TedsDead


Registered: 01/03/17
Posts: 4,998
|
Re: Pastywhyte’s Ez dialed monotubs [Re: jbgtaa] 1
#26694044 - 05/25/20 01:22 AM (3 years, 8 months ago) |
|
|
I love the EZ dials!
-------------------- weed gets you through times of no money better than money gets you through times of no weed... -the fabulous furry freak bros If you can buy it, you can burn it!
https://www.shroomery.org/forums/showflat.php/Number/25947396#25947396
|
Just_A_Noob
Breathing



Registered: 12/30/16
Posts: 6,809
Loc: PNW
|
Re: Pastywhyte’s Ez dialed monotubs [Re: TedsDead]
#26701867 - 05/28/20 01:32 PM (3 years, 8 months ago) |
|
|
Me too!
-------------------- Wearing a mask is bad for my physical, emotional, and spiritual health. Complying = Consent Wide Mouth 1/2 Pint No-Pour TEK TC Teks & Links
|
|