Home | Community | Message Board

Kratom Eye
This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: Original Sensible Seeds Bulk Cannabis Seeds   North Spore Bulk Substrate   Myyco.com Pan Cyan Liquid Culture For Sale   MagicBag.co All-In-One Bags That Don't Suck   Sporeworks.EU Spores for European Microscopy

Jump to first unread post Pages: 1
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
Monotub conversion to SGFC?
    #25596962 -

Can I convert a 40-quart monotub (with six holes) to a SGFC simply by drilling lots of holes in the bottom and top and adding wet perlite?  Would this work or would a 60-quart one be better with the all the small holes as per spec?

Is the most important flow of air from the bottom to the top to suck moisture out through the perlite?


--------------------
Why reinvent the wheel when someone here has already done the science?


Extras: Filter Print Post Top
Re: Monotub conversion to SGFC? [Re: AgarStudent]
    #25596983 -

In theory SGFC is supposed to wich sir from underneath out trough the top but who can demonstrate that this is so? :shrug:


--------------------
Cakes inside Water Tub with optimal Surface Conditions

Extras: Filter Print Post Top
Re: Monotub conversion to SGFC? [Re: Mateja]
    #25596991 -

Alright thanks, I will have a go at it :wink:


--------------------
Why reinvent the wheel when someone here has already done the science?


Extras: Filter Print Post Top
Re: Monotub conversion to SGFC? [Re: AgarStudent]
    #25596997 -

60qts works good, i've read that even 20qts work :wink:. For most people the bigger the better because of space.

Yes, that is the direccion of air flow due to the differences of pressure, so the bottom holes are very important. follow the tek and you will have success


--------------------

Extras: Filter Print Post Top
Re: Monotub conversion to SGFC? [Re: ElViajero]
    #25597000 -

i dont think is hard to demonstrate it.... :rasta:


--------------------

Extras: Filter Print Post Top
Re: Monotub conversion to SGFC? [Re: ElViajero]
    #25597064 -

Alright... might get two 40 quart monotubs and just stick them together with the top one upside down...Then I would have 80 quarts 😉 Cheers


--------------------
Why reinvent the wheel when someone here has already done the science?


Extras: Filter Print Post Top
Re: Monotub conversion to SGFC? [Re: AgarStudent]
    #25597077 -

Want a chamber appropriately sized for the number of cakes you're doing... space them 4" or so from walls and one another... easier to maintain humidity if you limit space per cake... I've seen more noobs having success with Mateah's humidity chamber  , which has the added advantage of not requiring modification

Extras: Filter Print Post Top
Re: Monotub conversion to SGFC? [Re: Caps McGee]
    #25597127 -

Thanks Caps, It is for pan cyans, hence I am not sure if Mateah’s chamber would have enough aitlr flow.  I did have some regular 60 quart SGFCs a few years ago that worked with hydrated perlite in the bottom, but I threw them out and was hoping to modify existing monotubs


--------------------
Why reinvent the wheel when someone here has already done the science?


Extras: Filter Print Post Top
Re: Monotub conversion to SGFC? [Re: AgarStudent]
    #25597145 -

AgarStudent said:
I am not sure if Mateah’s chamber would have enough aitlr flow.



Humidity Chamber has adjustable FAE. Ranging from too little to too much. :thumbup:


--------------------
Cakes inside Water Tub with optimal Surface Conditions

Extras: Filter Print Post Top
Re: Monotub conversion to SGFC? [Re: Mateja]
    #25597159 -

Thanks Mateah,

Nice simple concept... I like it.  But have you had luck growing pans in it out of curiosity?


--------------------
Why reinvent the wheel when someone here has already done the science?


Extras: Filter Print Post Top
Re: Monotub conversion to SGFC? [Re: AgarStudent]
    #25597169 -

You haven’t had any issues with coco going mouldy?


--------------------
Why reinvent the wheel when someone here has already done the science?


Extras: Filter Print Post Top
Re: Monotub conversion to SGFC? [Re: AgarStudent]
    #25597186 -

Just do trays of Pans in a mono. I did some Pan Bisporus that way not long ago.


--------------------
Pat The Bunny said:
A punk rock song won't ever change the world, but I can tell you about a couple that changed me.

bodhisatta said:
i recommend common sense and figuring it out.

These are the TEKs I use. They're all as cheap and easy as possible, just like your mom.

Extras: Filter Print Post Top
Re: Monotub conversion to SGFC? [Re: 36fuckin5]
    #25597194 -

An unmodified mono, or one with six holes and polyfil?  With nothing on the bottom as a humidifier?

Cheers


--------------------
Why reinvent the wheel when someone here has already done the science?


Edited by AgarStudent (11/06/18 08:32 PM)

Extras: Filter Print Post Top
Re: Monotub conversion to SGFC? [Re: AgarStudent]
    #25597274 -

AgarStudent said:
Thanks Mateah,

Nice simple concept... I like it.  But have you had luck growing pans in it out of curiosity?



No I haven't but I don't see why Pans wouldn't fruit just fine in a HC.
AgarStudent said:
You haven’t had any issues with coco going mouldy?



Nope and I don't think over saturated coir can harbor molds. :shrug: too wet climate for your typical molds.


--------------------
Cakes inside Water Tub with optimal Surface Conditions

Extras: Filter Print Post Top
Re: Monotub conversion to SGFC? [Re: Mateja]
    #25597298 -

Awesome.  Makes scalable grows easier, as perlite only seems to come in 100L bags, which is a shitload for an apartment 😬


--------------------
Why reinvent the wheel when someone here has already done the science?


Extras: Filter Print Post Top
Re: Monotub conversion to SGFC? [Re: 36fuckin5]
    #25597305 -

Hey 36fucking5,
Do you have a grow log or a link to how you did it?  No perlite?

Edited by AgarStudent (11/06/18 09:37 PM)

Extras: Filter Print Post Top
Re: Monotub conversion to SGFC? [Re: AgarStudent]
    #25597455 -

https://www.shroomery.org/forums/showflat.php/Number/25435738

No perlite. A tray with spawn and sub, cased. Drop 2 inside a regular-ass 66 qt mono with Polyfil. I'd say you probably actually need to use 2 trays to create enough RH in that space.

I'd like to reiterate how little of a plan I had when starting these. It was super easy this way. Other Pans might need slightly different stuff, like you shouldn't mist them directly for instance, but I think you can dial in enough FAE to make it work.

CaptainFuture has fruited a lot of exotic shit in bags in a mono like that. That's where I got the idea. IDK how much he has here but he posted a lot on Mycotopia back in the day.


--------------------
Pat The Bunny said:
A punk rock song won't ever change the world, but I can tell you about a couple that changed me.

bodhisatta said:
i recommend common sense and figuring it out.

These are the TEKs I use. They're all as cheap and easy as possible, just like your mom.

Extras: Filter Print Post Top
Re: Monotub conversion to SGFC? [Re: 36fuckin5]
    #25597515 -

Well that is a darn side easier than Blue Felix’s misting and heating apparatus!  Nice and simple too.
I wonder if that would work with an unmodified tub too.


--------------------
Why reinvent the wheel when someone here has already done the science?


Extras: Filter Print Post Top
Jump to top Pages: 1

Shop: Original Sensible Seeds Bulk Cannabis Seeds   North Spore Bulk Substrate   Myyco.com Pan Cyan Liquid Culture For Sale   MagicBag.co All-In-One Bags That Don't Suck   Sporeworks.EU Spores for European Microscopy


Similar ThreadsPosterViewsRepliesLast post
* Questions Regarding Shotgun FC's and Monotubs?
( 1 2 3 all )
Skn-E 5,273 44 01/13/19 02:55 PM
by BobBee
* Can I turn my monotub into a SGFC? **Update w/ Pics 1-28**
( 1 2 3 all )
Mastermind729 9,845 54 01/28/10 09:45 PM
by Mastermind729
* Outdoor monotub grow? maximilian18 3,575 10 02/05/10 01:58 AM
by snesgamer
* Casing Bulk Headed for SGFC? EnergizerBunny 712 3 07/15/10 09:22 AM
by hamloaf
* neglected monotubs? Sig 663 7 03/16/10 10:50 PM
by SomeNewGuy
* monotub quick questions Naz 703 8 05/06/10 11:09 AM
by MoreChellasPlease
* Monotub Chamber? Issius 393 6 07/13/10 01:40 PM
by k00laid
* Colonization vs. Fruiting Bod's Unmodified Monotub multifractal 6,808 6 05/04/21 04:27 AM
by Goatrider

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, the_chosen_one, LogicaL Chaos, 13shrooms, hamloaf, cronicr, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a
289 topic views. 8 members, 799 guests and 61 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2026 Mind Media. Some rights reserved.

Generated in 0.039 seconds spending 0.012 seconds on 16 queries.