|
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
BOD's SIMPLE AS FUCK SAB TEK 313
#23990888 - 01/07/17 08:51 PM (7 years, 2 months ago) |
|
|
This tek is part of bod's cultivation is easy as fuck link listBod's Easy AF SAB TEKwhat do you need?A 110q tub or a 66q tub. 110q is preferred. alternatively you can build one out of Plexiglas or something else like an aquarium but that's not the simple AF way. Some people have found tubs in the nearly 200q size as well, that will work too. you will also need
Paper Towel, 70% alcohol (usually iso) gloves for your hands A torch (or anything that doesn't fuck around like those little alcohol lamp things) And some tools like a scalpel and inoculation loop(not pictured) and you will also need a spray bottle(not pictured), that's capable of making mist, with some warm water and a drop of dish soap (approx 500ml water for one drop of dawn or Palmolive) I color code my spray bottles Blue for mist water(for spraying substrates) Clear for 150ppm chlorine(not often used) Green for 70% ISO Yellow for water with a drop of soap for SAB spray 70% alcohol sanitizes better than 90+ or higher concentrations more info about that hereHow To Build Itdo the holes with one of these get it hot on a stove, don't burn yourself. make the arm holes comfortably far apart so that you can move your hands around as if there were no SAB there in the first place. The idea is to have the same freedom of motion you would have if you spent a bunch of money on a flow hood make some holes, clean them up with some sandpaper if needed so they don't cut your forearms up. How do you use it? How does it work?get a table and your SAB wipe the inside of the SAB and the table surface with some alcohol on a paper towel put the SAB on the table and you might want to put a weight on top so it doesn't move around at all put your work inside the box, (or put it on the table then put the SAB over it) spray the water inside the SAB with your sprayer on fine mist mode light your torch and put it on low, I put it on the side of my SAB on the table be prepared mentally for the work you're about to do have everything ready and rehearsed in your mind put the gloves on and wipe them down with iso, wipe your forearms down too WHY IT WORKSYou CANNOT sterilize the inside of a SAB Sanitizers are not Sterilizers and Sanitary is not sufficiently contamination free to do STERILE work. thus you have to work with physics rather than your chemicals you do not want air movement, it's a STILL AIR BOX this is why glove boxes are a no-no in this hobby glove boxes with attached gloves create air currents, you don't want to stir up non sterile air, you want to avoid having the contamination end up in your work in the first place This design uses no sleeves or any caps on the arm holes. I believe my work speaks for the efficacy of not needing to over complicate things. now get to work! Bod's 2017 threadBod's SAB videosVisit the link at the very top of this thread to see all the things you can do with your SAB
Edited by bodhisatta (05/28/17 05:44 PM)
|
cronicr
Registered: 08/07/11
Posts: 61,436
Loc: Van Isle
Last seen: 2 years, 2 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta] 2
#23990904 - 01/07/17 08:55 PM (7 years, 2 months ago) |
|
|
can you make a copy for the getting started?
-------------------- It doesn't matter what i think of you...all that matters is clean spawn I'm tired do me a favor
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: cronicr] 3
#23990908 - 01/07/17 08:56 PM (7 years, 2 months ago) |
|
|
I hope you mean what I think, I made the same thread in getting started
Edited by bodhisatta (01/07/17 11:58 PM)
|
13shrooms
Lightning Shaman
Registered: 01/01/09
Posts: 26,719
Loc: IN ETHERS TORSION FIELD
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta] 2
#23991419 - 01/08/17 12:35 AM (7 years, 2 months ago) |
|
|
-------------------- A M U Click here ^ for the AMU forum VVV AMUs Free Active/Edible/Exotic Spore Print or Syringe or Edible Culture Trade Thread VVV "Man is the sex organ of the machine world" ~ Marshall McLuhan
|
The Mycologist
Explorer
Registered: 05/06/16
Posts: 3,024
Last seen: 17 days, 17 hours
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: 13shrooms] 2
#23991437 - 01/08/17 12:47 AM (7 years, 2 months ago) |
|
|
-------------------- "That you are here—that life exists, and identity; That the powerful play goes on, and you will contribute a verse.” ― Walt Whitman, Leaves of Grass
|
dracolusus
Eternal Noob
Registered: 01/22/16
Posts: 242
Loc: In a state of being
Last seen: 1 year, 10 months
|
|
Thanks for the write up. Need to get a bigger SAB. G2G is a pain in a 56 litre tub.
|
Nobler Hino
a dojo and a forge?!
Registered: 08/29/15
Posts: 1,780
Loc: Deep Ellum
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: dracolusus] 2
#23991552 - 01/08/17 02:59 AM (7 years, 2 months ago) |
|
|
Thanks bod, you da man
Is it a bad idea to sit your sab on a towel?
-------------------- "The sacred mushroom takes me by the hand and brings me to the world where everything is known. It is they, the sacred mushrooms, that speak in a way I can understand. I ask them and they answer me.” – Maria Sabina
Edited by Nobler Hino (01/08/17 03:04 AM)
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Nobler Hino] 2
#23991734 - 01/08/17 07:40 AM (7 years, 2 months ago) |
|
|
Some people do. I figure even a sanitized towel is more gross than a sanitized piece of plastic. I used to do it
|
Nobler Hino
a dojo and a forge?!
Registered: 08/29/15
Posts: 1,780
Loc: Deep Ellum
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta] 2
#23991772 - 01/08/17 08:04 AM (7 years, 2 months ago) |
|
|
Ill save the towel for the beach, thx again
-------------------- "The sacred mushroom takes me by the hand and brings me to the world where everything is known. It is they, the sacred mushrooms, that speak in a way I can understand. I ask them and they answer me.” – Maria Sabina
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Nobler Hino] 3
#23991790 - 01/08/17 08:14 AM (7 years, 2 months ago) |
|
|
Sometimes I lay down iso soaked paper towels but if you do that don't make a bomb
|
Tookitooki
Mycological Fabricator
Registered: 07/28/16
Posts: 1,157
Loc: Nowhere
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta] 2
#23991845 - 01/08/17 08:58 AM (7 years, 2 months ago) |
|
|
Was at the store yesterday and spotted this monster, it's 200qt. Do you see any disadvantage to using this for my SAB? When working with grain jars in my 110qt SAB, I run out of space.
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Tookitooki] 2
#23991857 - 01/08/17 09:05 AM (7 years, 2 months ago) |
|
|
even better
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta] 3
#23997769 - 01/10/17 10:20 AM (7 years, 2 months ago) |
|
|
bump, relevant as ever with all the 2017 logs starting
|
Nobler Hino
a dojo and a forge?!
Registered: 08/29/15
Posts: 1,780
Loc: Deep Ellum
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta] 2
#23997895 - 01/10/17 11:19 AM (7 years, 2 months ago) |
|
|
Man ive been fucking up for like a year now lol, ive always used tyvex sleeves attached to the arm holes.
While your waiting for the air to settle, do you like to stuff the holes?
-------------------- "The sacred mushroom takes me by the hand and brings me to the world where everything is known. It is they, the sacred mushrooms, that speak in a way I can understand. I ask them and they answer me.” – Maria Sabina
|
projectbadass
Wrangler
Registered: 12/20/16
Posts: 100
Loc: Northeast Ohio
Last seen: 2 years, 9 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Nobler Hino] 2
#23997924 - 01/10/17 11:28 AM (7 years, 2 months ago) |
|
|
simple AF
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Nobler Hino] 2
#23997938 - 01/10/17 11:33 AM (7 years, 2 months ago) |
|
|
Quote:
Nobler Hino said: Man ive been fucking up for like a year now lol, ive always used tyvex sleeves attached to the arm holes.
While your waiting for the air to settle, do you like to stuff the holes?
I don't wait for the air to settle and I don't stuff the holes
by the time I'm ready to work it's settled out 30-60 seconds anyway
|
Nobler Hino
a dojo and a forge?!
Registered: 08/29/15
Posts: 1,780
Loc: Deep Ellum
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta] 2
#23998251 - 01/10/17 01:29 PM (7 years, 2 months ago) |
|
|
Well, that is simple as fuck.
-------------------- "The sacred mushroom takes me by the hand and brings me to the world where everything is known. It is they, the sacred mushrooms, that speak in a way I can understand. I ask them and they answer me.” – Maria Sabina
|
emosavagerabbit
Troll of Caerbannog
Registered: 12/09/16
Posts: 116
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Nobler Hino] 3
#24015060 - 01/16/17 03:30 PM (7 years, 2 months ago) |
|
|
My first crack a SAB involved trying to saw the holes, which lead to cracks...
Frustrated, and looking for a reason to roast a coffee can on the stove, I recalled taking notes on Bod's glove box. Fast forward 15 minutes, and I melted two perfect holes in my tote!
It took longer to file the melted holes than it did to make them. Will second doing this in a well ventilated place.
|
AK1000
Stranger
Registered: 06/06/16
Posts: 488
Last seen: 2 years, 7 months
|
|
Another thing I'll add is that don't be afraid of making the arm-holes larger than 6 inches because it lessens the amount of air-disruption as you move around.
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: AK1000] 3
#24015580 - 01/16/17 07:04 PM (7 years, 2 months ago) |
|
|
Quote:
AK1000 said: Another thing I'll add is that don't be afraid of making the arm-holes larger than 6 inches because it lessens the amount of air-disruption as you move around.
Quote:
emosavagerabbit said: My first crack a SAB involved trying to saw the holes, which lead to cracks...
Frustrated, and looking for a reason to roast a coffee can on the stove, I recalled taking notes on Bod's glove box. Fast forward 15 minutes, and I melted two perfect holes in my tote!
It took longer to file the melted holes than it did to make them. Will second doing this in a well ventilated place.
It's worth doing a nice finished job on the melted holes. But if you do a "low temp" melt thru there's less fumes. And there's a buildup of plastic that can be smoothed. It may take three four heat ups to get thru but better than making the can red hot and burning plastic
|
emosavagerabbit
Troll of Caerbannog
Registered: 12/09/16
Posts: 116
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24015942 - 01/16/17 09:13 PM (7 years, 2 months ago) |
|
|
That's good to know!
So Bod, you actually don't wait for the air to settle? It seems like you just jump right in after it being setup. That would make things pretty painless.
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
|
It inherently gets about 30-60 seconds bare minimum or even a few minutes
|
LogicaL Chaos
Ascension Energy & Alien UFOs
Registered: 05/12/07
Posts: 69,833
Loc: The Inexpressible...
Last seen: 48 minutes, 9 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24015999 - 01/16/17 09:41 PM (7 years, 2 months ago) |
|
|
Now THATS simple as fuck
Would u be mad if i went old skool and taped some long ass kitchen gloves to those holes to avoid the piston effect?
-------------------- "What you must understand is that your physical dimension affects everyone in the higher dimensions as well. All things are interconnected. All things are One. Therefore, if one dimension is broken or out of balance, then all other dimensions will experience repercussions." - Pleiadian Prophecy 2020 The New Golden Age by James Carwin PROJECT BLUE BOOK ANALYSIS! (312 pages!) | Psychedelics & UFOs | Ready to Contact UFOs? | The Source on Mushrooms| Trippy Gematrix | Dj TeknoLogical | Fentanyl Test Kits R.I.P. Big Worm || The Start of the Ascension Process was 2020. Welcome to the Next Great Era of Earth 🌎🌍🌏 Oregon Eclipse Festival 2017 :: Aug 19th - 21st :: Pure Paradise Very Effective LSA Extraction Tek | 💧 Advanced Cold Water LSA Extraction Method 💧 | Mescajuana - Mescaline with Marijuana | DMT Dab Bongs | UFO Technology! Shpongle
|
AK1000
Stranger
Registered: 06/06/16
Posts: 488
Last seen: 2 years, 7 months
|
|
Quote:
LogicaL Chaos said: Now THATS simple as fuck
Would u be mad if i went old skool and taped some long ass kitchen gloves to those holes to avoid the piston effect?
That would probably make things worse, TBH.
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: AK1000]
#24016145 - 01/16/17 10:52 PM (7 years, 2 months ago) |
|
|
sometimes I don't wear gloves at all
|
emosavagerabbit
Troll of Caerbannog
Registered: 12/09/16
Posts: 116
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24016360 - 01/17/17 12:35 AM (7 years, 2 months ago) |
|
|
Now you're making me feel like I went overboard with the tyvek sleeves and the surgical masks!
Based on the performance of your grows, I assume that you don't have contamination issues?
|
azur
God of Fuck
Registered: 04/21/12
Posts: 28,103
Loc: Daid
|
|
Everyone gets contamination sometimes
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: azur]
#24016785 - 01/17/17 08:47 AM (7 years, 2 months ago) |
|
|
Even spawn labs with hoods and fancy boot washing stations
|
mushboy
modboy
Registered: 04/24/05
Posts: 32,643
Loc: where?
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta] 3
#24016796 - 01/17/17 08:53 AM (7 years, 2 months ago) |
|
|
i still use gloves and spray the box but all the washing and bathing/masks and shit is overkill.
use good technique and you dont need a lvl5 bio suit to knock up a jar.
|
Mr Piggy
Big Dick Retard
Registered: 09/29/11
Posts: 8,779
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta] 5
#24017008 - 01/17/17 10:29 AM (7 years, 2 months ago) |
|
|
Quote:
bodhisatta said: ...and fancy boot washing stations
Ohhh, that's what those things are! They really make it difficult having them off the ground though.
--------------------
🅃🄴🄰🄼 🄵🄾🄸🄻
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: azur]
#24017061 - 01/17/17 10:55 AM (7 years, 2 months ago) |
|
|
Quote:
azur said: Everyone gets contamination sometimes
5 out of 10 of my GT jars I made didn't recover , there's various degrees of recovery. but none of them are acceptable
this is two days after a shake
the other 5 seemed to do well with the same LC. different batches of grain in the cooker though..
I made a tub with the other 5 and it's almost fully colonized it was spawned on the 13th
|
LogicaL Chaos
Ascension Energy & Alien UFOs
Registered: 05/12/07
Posts: 69,833
Loc: The Inexpressible...
Last seen: 48 minutes, 9 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Mr Piggy] 1
#24017109 - 01/17/17 11:18 AM (7 years, 2 months ago) |
|
|
Quote:
Mr Piggy said:
Quote:
bodhisatta said: ...and fancy boot washing stations
Ohhh, that's what those things are! They really make it difficult having them off the ground though.
|
azur
God of Fuck
Registered: 04/21/12
Posts: 28,103
Loc: Daid
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24017148 - 01/17/17 11:36 AM (7 years, 2 months ago) |
|
|
Quote:
bodhisatta said:
Quote:
azur said: Everyone gets contamination sometimes
5 out of 10 of my GT jars I made didn't recover , there's various degrees of recovery. but none of them are acceptable
this is two days after a shake
the other 5 seemed to do well with the same LC. different batches of grain in the cooker though..
I made a tub with the other 5 and it's almost fully colonized it was spawned on the 13th
We need more people posting this type of stuff. Not just their success. Because it makes noobs think that if they get a simple contamination they're failing
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: azur]
#24017155 - 01/17/17 11:38 AM (7 years, 2 months ago) |
|
|
And pictures of shitty fills on their jars too. Hahah I had a friend help so they're loaded all funny. Get to the last two jars and there's not enough to go around. Some are almost too full to shake..
|
LogicaL Chaos
Ascension Energy & Alien UFOs
Registered: 05/12/07
Posts: 69,833
Loc: The Inexpressible...
Last seen: 48 minutes, 9 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24017167 - 01/17/17 11:44 AM (7 years, 2 months ago) |
|
|
ha.
The best is 3/4 full right?
And i agree with azur, more people should post about their failures. NO SHAME! We arent gunna beat u down (too much anyway).
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
|
I like 2/3 full. The jar on the left is closest. A little more grain And its perfect.
I use ~13-14 dry cups of oats for 10 quart jars.
|
LogicaL Chaos
Ascension Energy & Alien UFOs
Registered: 05/12/07
Posts: 69,833
Loc: The Inexpressible...
Last seen: 48 minutes, 9 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24017185 - 01/17/17 11:50 AM (7 years, 2 months ago) |
|
|
yah, i agree. The far left one is just a little shy of perfect.
U like oats huh? Any reason why oats over say rye?
|
mushboy
modboy
Registered: 04/24/05
Posts: 32,643
Loc: where?
|
|
i bet the same reasons people use rye over wbs.
|
emosavagerabbit
Troll of Caerbannog
Registered: 12/09/16
Posts: 116
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: mushboy]
#24021890 - 01/19/17 03:04 AM (7 years, 2 months ago) |
|
|
I will say that through my reading, I've assumed that contamination's meant that there was problem with your sterile technique. I honestly didn't think that it was unavoidable sometimes.
It's basically the reason I've started with agar, so that the contamination is easier to see.
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
|
Quote:
LogicaL Chaos said: yah, i agree. The far left one is just a little shy of perfect.
U like oats huh? Any reason why oats over say rye?
Oats are 12$ for 50#
|
mrmazdarx9
Pffffttt
Registered: 05/15/16
Posts: 9,796
Loc: behind you
Last seen: 1 year, 5 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24022430 - 01/19/17 09:35 AM (7 years, 2 months ago) |
|
|
Nicely done bod needed doing
-------------------- COCA GROWERS come here and share your knowledge COCA GROWERS UNITE Click here for UK trades need some supplies in the UK check Here or PM me UK OTD uk members chat UK supplies and trade OTD place to chat shit Right Here If you use "SWIM" you should DROWN
|
AlCapone2k
Beginner
Registered: 10/06/16
Posts: 842
Loc: Germany
Last seen: 6 years, 6 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24022449 - 01/19/17 09:40 AM (7 years, 2 months ago) |
|
|
Bodhi, you are the man! Thank you for your really easy teks you present us I like the idea of not using a towel since my girlfriend hates me for using a towel every two days
But I ask myself ... where do you put your stuff on? I mean jars, dishes etc. Do you put in on the soaked bottom directly or do you have some kind of table for them?
I can't imagine that it's good to put the stuff directly on the bottom with all the soapy water which is full of microbes.
Since now I use a towel and I put a piece of tin foil from the inner roll on it and then I put the stuff on it.
Regards
-------------------- Since I am from Germany, my english is not perfect but I try my best My small Agar to Oyster Open Air Grow Trek
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: AlCapone2k]
#24022455 - 01/19/17 09:41 AM (7 years, 2 months ago) |
|
|
Jars go right on the floor. I seperate petri dishes with one blank dish on the bottom of the stack.
|
AlCapone2k
Beginner
Registered: 10/06/16
Posts: 842
Loc: Germany
Last seen: 6 years, 6 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24022463 - 01/19/17 09:43 AM (7 years, 2 months ago) |
|
|
yeah, that's a nice idea!
Regards!
-------------------- Since I am from Germany, my english is not perfect but I try my best My small Agar to Oyster Open Air Grow Trek
|
germanauslander
Forever Learner
Registered: 11/06/16
Posts: 100
Last seen: 5 years, 8 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: AlCapone2k]
#24046979 - 01/28/17 05:02 PM (7 years, 1 month ago) |
|
|
Noob question on the torch, but you have it there to burn off potential contaminants right? and also using it to sterilize syringes before innoculating? or do you use a different flame inside the SAB for that? My first SAB I have built sucks, which is basically this TEK but it's too small, and the plastic is a little but too cloudy(not clear enough). Which means I can't comfortably work looking in from the top, and need to look in through the arm holes.
|
Pastywhyte
Say hello to my little friend
Registered: 09/15/12
Posts: 37,830
Loc: Canada
|
|
You can't have a flame inside the SAB because it will stir up the air inside. If your SAB sucks build a new one.
|
shroomdude74
noobster
Registered: 01/23/13
Posts: 7
Last seen: 1 year, 1 month
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Pastywhyte]
#24047204 - 01/28/17 06:44 PM (7 years, 1 month ago) |
|
|
About to get back into this hobby again and this was helpful, thanks man!
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Pastywhyte]
#24047220 - 01/28/17 06:48 PM (7 years, 1 month ago) |
|
|
Quote:
Pastywhyte said: You can't have a flame inside the SAB because it will stir up the air inside. If your SAB sucks build a new one.
Yep
|
tryptkaloids
Learner
Registered: 02/08/15
Posts: 12,650
Loc: Exact Center
Last seen: 42 minutes, 10 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24049115 - 01/29/17 01:52 PM (7 years, 1 month ago) |
|
|
Quote:
bodhisatta said:
Quote:
Pastywhyte said: You can't have a flame inside the SAB because it will stir up the air inside. If your SAB sucks build a new one.
Yep
Quote:
bodhisatta said:
Quote:
Nobler Hino said: Man ive been fucking up for like a year now lol, ive always used tyvex sleeves attached to the arm holes.
While your waiting for the air to settle, do you like to stuff the holes?
I don't wait for the air to settle and I don't stuff the holes
by the time I'm ready to work it's settled out 30-60 seconds anyway
damn, do you even spray?
-------------------- "Remember, kids, the difference between science and screwing around is writing it down" -adam savage Flowchart for Recommended plan of action. Learn the tried and true way to grow mushrooms Use the Damn search engine After you know what you're doing, take a break Pick a book, Make some chips! Josex said:Don't take the site seriously bro, ain't worth it.
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
|
Yea
|
tryptkaloids
Learner
Registered: 02/08/15
Posts: 12,650
Loc: Exact Center
Last seen: 42 minutes, 10 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24049157 - 01/29/17 02:06 PM (7 years, 1 month ago) |
|
|
I've heard of people just going in dry... I would say that's not solid advice anywhere in life
-------------------- "Remember, kids, the difference between science and screwing around is writing it down" -adam savage Flowchart for Recommended plan of action. Learn the tried and true way to grow mushrooms Use the Damn search engine After you know what you're doing, take a break Pick a book, Make some chips! Josex said:Don't take the site seriously bro, ain't worth it.
|
emosavagerabbit
Troll of Caerbannog
Registered: 12/09/16
Posts: 116
|
|
Quote:
tryptkaloids said: I've heard of people just going in dry... I would say that's not solid advice anywhere in life
0/10,
Would not recommend for either party.
On topic though; I can say I followed the TEK and didn't get any contams, so it does work.
|
Loveshroomz777
Registered: 11/19/16
Posts: 616
|
|
Nice tek bodhisatta nice and simple
-------------------- PEACE, LOVE AND PSYCHEDELICS
|
Loveshroomz777
Registered: 11/19/16
Posts: 616
|
|
I just picked up a 110 quart SAB today I was wondering if you set anything down on the bottom bodhisatta like a towel? Is it ok if I just wipe it down with 70% ISO and use it like that with nothing on the bottom
-------------------- PEACE, LOVE AND PSYCHEDELICS
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
|
Hard surface> towel Hard surfaces easiest to sanitize. I use a plastic table
|
Loveshroomz777
Registered: 11/19/16
Posts: 616
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24052780 - 01/30/17 08:00 PM (7 years, 1 month ago) |
|
|
I think I get it you take the lid off put a towel on a table and place the tub on the towel correct? Also do I put anything on the towel like soap or what should I use? Is it ok to set my jars on top of the towel when working What do I spray the inside of my SAB with before working
-------------------- PEACE, LOVE AND PSYCHEDELICS
Edited by Loveshroomz777 (01/30/17 08:30 PM)
|
Loveshroomz777
Registered: 11/19/16
Posts: 616
|
|
I just found my answer I read that you spray the towel with soap water Now my question is is it ok to set my jars on the wet towel? It kind of doesn't make sense to put the jars on the wet towel since it is used to trap contaminations
-------------------- PEACE, LOVE AND PSYCHEDELICS
|
Loveshroomz777
Registered: 11/19/16
Posts: 616
|
|
I got it figured out bodhisatta thanks for the help
-------------------- PEACE, LOVE AND PSYCHEDELICS
|
tryptkaloids
Learner
Registered: 02/08/15
Posts: 12,650
Loc: Exact Center
Last seen: 42 minutes, 10 seconds
|
|
Quote:
Loveshroomz777 said: I just found my answer I read that you spray the towel with soap water Now my question is is it ok to set my jars on the wet towel? It kind of doesn't make sense to put the jars on the wet towel since it is used to trap contaminations
instead of posting a bunch of questions type them into the search engine...
-------------------- "Remember, kids, the difference between science and screwing around is writing it down" -adam savage Flowchart for Recommended plan of action. Learn the tried and true way to grow mushrooms Use the Damn search engine After you know what you're doing, take a break Pick a book, Make some chips! Josex said:Don't take the site seriously bro, ain't worth it.
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24053338 - 01/30/17 11:49 PM (7 years, 1 month ago) |
|
|
Quote:
bodhisatta said: Hard surface> towel Hard surfaces easiest to sanitize. I use a plastic table
Dude I told you here that i don't use a towel. And in the OP it's just a table too.
|
Loveshroomz777
Registered: 11/19/16
Posts: 616
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24053434 - 01/31/17 01:23 AM (7 years, 1 month ago) |
|
|
Sorry I misunderstood you thanks for clarifying Have a good night
-------------------- PEACE, LOVE AND PSYCHEDELICS
|
AK1000
Stranger
Registered: 06/06/16
Posts: 488
Last seen: 2 years, 7 months
|
|
I, on the other hand, while a noob, find great solace in using a towel as a floor in the SAB. But I don't just spray the towel, that isn't enough. I literally fill a bottle with soap and water and dump the entire bottle all over the towel so it's soaked. This was a tip I read about from another veteran here and it was very helpful for me. Like another user said, it's not about sanitizing as much as it is about reducing shit floating in the box and particulates will stick to the towel better if it's wet like that.
|
tryptkaloids
Learner
Registered: 02/08/15
Posts: 12,650
Loc: Exact Center
Last seen: 42 minutes, 10 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: AK1000]
#24053872 - 01/31/17 09:18 AM (7 years, 1 month ago) |
|
|
don't just spray the towel, spray the walls and the lid, these are the most important IMO
-------------------- "Remember, kids, the difference between science and screwing around is writing it down" -adam savage Flowchart for Recommended plan of action. Learn the tried and true way to grow mushrooms Use the Damn search engine After you know what you're doing, take a break Pick a book, Make some chips! Josex said:Don't take the site seriously bro, ain't worth it.
|
The_breadsticks
Stranger
Registered: 09/23/16
Posts: 220
Last seen: 3 years, 2 months
|
|
I notice you said put your work in then spray. I normally spray then put my work in. Does it matter? I just worry about the dust-containing water landing on my jars?
Btw - I just grew two monotubs of the worst mush ever. 14 grams cracker dry in tea did nothing but taste horrible. Im so bummed.
-------------------- FREE TUMP
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
|
Well you're you touch your jars with a gloved hand thats only sanitized with alcohol so I wouldn't worry so much about dust on the jars. Regardless you cant have it contaminate things you don't want it to contaminate, your gloves are not sterile so right there you defeat the purpose of having 100% clean outsides of jars
|
tryptkaloids
Learner
Registered: 02/08/15
Posts: 12,650
Loc: Exact Center
Last seen: 42 minutes, 10 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24053926 - 01/31/17 09:35 AM (7 years, 1 month ago) |
|
|
I would only worry about it if you're using micropore filters but even then you'll probably be fine
-------------------- "Remember, kids, the difference between science and screwing around is writing it down" -adam savage Flowchart for Recommended plan of action. Learn the tried and true way to grow mushrooms Use the Damn search engine After you know what you're doing, take a break Pick a book, Make some chips! Josex said:Don't take the site seriously bro, ain't worth it.
|
The_breadsticks
Stranger
Registered: 09/23/16
Posts: 220
Last seen: 3 years, 2 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24064572 - 02/04/17 08:33 AM (7 years, 1 month ago) |
|
|
Quote:
bodhisatta said: Well you're you touch your jars with a gloved hand thats only sanitized with alcohol so I wouldn't worry so much about dust on the jars. Regardless you cant have it contaminate things you don't want it to contaminate, your gloves are not sterile so right there you defeat the purpose of having 100% clean outsides of jars
I kinda found a middle ground. I set all my work on the table. Pick the tote up and spray it. Then set it over the jars.
Is this OK? Im having a lot of contam issues, but with how lax you are im thinking it has more to do with my agar
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
|
Yea that's fine. Relaxation and acting like it isn't your first rodeo helps far more than sanitizer or anything else
|
AK1000
Stranger
Registered: 06/06/16
Posts: 488
Last seen: 2 years, 7 months
|
|
Quote:
The_breadsticks said:
Quote:
bodhisatta said: Well you're you touch your jars with a gloved hand thats only sanitized with alcohol so I wouldn't worry so much about dust on the jars. Regardless you cant have it contaminate things you don't want it to contaminate, your gloves are not sterile so right there you defeat the purpose of having 100% clean outsides of jars
I kinda found a middle ground. I set all my work on the table. Pick the tote up and spray it. Then set it over the jars.
Is this OK? Im having a lot of contam issues, but with how lax you are im thinking it has more to do with my agar
Are you spraying it after you set the tote down again? Cause you definitely should. I avoid lifting the SAB cause it disturbs the air a lot and I spray before and after.
|
AlCapone2k
Beginner
Registered: 10/06/16
Posts: 842
Loc: Germany
Last seen: 6 years, 6 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: AK1000]
#24065168 - 02/04/17 01:47 PM (7 years, 1 month ago) |
|
|
Actually I don't spray After Setting the sab on the towel. I spray on the towel, then I put the things on the towel, spray the inside of the SAB and then I put the SAB on the towel.
Afterwards no spraying.
And I have a very low contamn rate with agar (under 5% definetely).
So maybe you should try the towel thing. Or Improve your sterile work.
Regards
-------------------- Since I am from Germany, my english is not perfect but I try my best My small Agar to Oyster Open Air Grow Trek
Edited by AlCapone2k (02/04/17 01:48 PM)
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: AlCapone2k]
#24066368 - 02/04/17 11:37 PM (7 years, 1 month ago) |
|
|
I'm not entirely convinced the spraying of the inside has much to do with how effective the sab is.
|
AlCapone2k
Beginner
Registered: 10/06/16
Posts: 842
Loc: Germany
Last seen: 6 years, 6 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24066816 - 02/05/17 08:14 AM (7 years, 1 month ago) |
|
|
To be honest me too. I don't think the contamns in Agar work of breadsticks result from the SAB procedure but more from the sterile work.
-------------------- Since I am from Germany, my english is not perfect but I try my best My small Agar to Oyster Open Air Grow Trek
|
van hatton
Still a noob
Registered: 11/23/14
Posts: 5,617
Loc: Michigan
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: AlCapone2k]
#24066953 - 02/05/17 09:28 AM (7 years, 1 month ago) |
|
|
IMO it doesn't help if a swift movement is accidentally made or somewhat or another I feel the contams will more easily be able too come off the wall. Vs if it's sprayed down.
-------------------- If I ever give out misinformation please inform me so I can have the correct information. Tmethyl said: Chuck Norris once roundhouse kicked a monotub that wasn't pinning fast enough. The force of the kick rearranged the genetics of the mushrooms, we now call them Penis Envy. Caps McGee said: Fun part is figuring out what works best for you
|
Nobler Hino
a dojo and a forge?!
Registered: 08/29/15
Posts: 1,780
Loc: Deep Ellum
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: van hatton]
#24067113 - 02/05/17 10:36 AM (7 years, 1 month ago) |
|
|
I spray every wall except the top, nothing like a drip of soapy water in your petri
-------------------- "The sacred mushroom takes me by the hand and brings me to the world where everything is known. It is they, the sacred mushrooms, that speak in a way I can understand. I ask them and they answer me.” – Maria Sabina
Edited by Nobler Hino (02/05/17 10:37 AM)
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Nobler Hino]
#24088530 - 02/13/17 10:23 PM (7 years, 1 month ago) |
|
|
|
7munkee
Berilion
Registered: 08/10/15
Posts: 273
Loc: North east US
Last seen: 1 month, 19 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Nobler Hino]
#24110893 - 02/22/17 12:35 PM (7 years, 1 month ago) |
|
|
Quote:
Nobler Hino said: I spray every wall except the top, nothing like a drip of soapy water in your petri
See, it's things like this that make it wise to read as many responses as possible to the tek. I would have done just that, dripped soapy water into my petri. Another thing to watch out for, latches on the ends of your box. They can cause your upside down tote to rock slightly, stirring up currents.
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: 7munkee] 1
#24111149 - 02/22/17 02:31 PM (7 years, 1 month ago) |
|
|
I simply don't spray enough to saturate the lid to the point of causing drips lol
|
Nobler Hino
a dojo and a forge?!
Registered: 08/29/15
Posts: 1,780
Loc: Deep Ellum
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24111159 - 02/22/17 02:34 PM (7 years, 1 month ago) |
|
|
Lol, i get trigger happy
-------------------- "The sacred mushroom takes me by the hand and brings me to the world where everything is known. It is they, the sacred mushrooms, that speak in a way I can understand. I ask them and they answer me.” – Maria Sabina
|
Mr Piggy
Big Dick Retard
Registered: 09/29/11
Posts: 8,779
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24111163 - 02/22/17 02:35 PM (7 years, 1 month ago) |
|
|
I've just put a fine mist on the top so drops don't form. No problems yet, instructions seemed clear?
--------------------
🅃🄴🄰🄼 🄵🄾🄸🄻
|
KuTTeR
Stranger
Registered: 02/27/17
Posts: 1
Last seen: 7 years, 29 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24124470 - 02/27/17 06:55 PM (7 years, 30 days ago) |
|
|
Quote:
cronicr said: can you make a copy for the getting started?
Hi thanks for all the great info. I have just one question if you don't mind. How do you grow on the bottom of tubs like that?im new so all I know is make substrate, put it in canning jars, be as sterile as possible and put it in a SAB
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: KuTTeR]
#24124594 - 02/27/17 07:47 PM (7 years, 30 days ago) |
|
|
Link in my signature below
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24167193 - 03/16/17 02:23 PM (7 years, 13 days ago) |
|
|
few small updates
|
SighLowSighBeen
Stranger
Registered: 03/03/17
Posts: 100
Last seen: 5 years, 17 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24174075 - 03/19/17 07:20 AM (7 years, 10 days ago) |
|
|
Quote:
put your work inside the box, (or put it on the table then put the SAB over it) spray the water inside the SAB with your sprayer on fine mist mode
Do I use the soap/water here, or just plain water? Thanks
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
|
Doesn't matter. But yes the Very dilute soap water.
|
SighLowSighBeen
Stranger
Registered: 03/03/17
Posts: 100
Last seen: 5 years, 17 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24174148 - 03/19/17 08:19 AM (7 years, 10 days ago) |
|
|
Thank you sir. Getting ready to do my first EVER! Gotta make the holes in the SAB real quick then inoculate the agar I made last night. Hopefully they turned out ok but I won't know til I open the pc.
|
tryptkaloids
Learner
Registered: 02/08/15
Posts: 12,650
Loc: Exact Center
Last seen: 42 minutes, 10 seconds
|
|
until they open they'll be fine
-------------------- "Remember, kids, the difference between science and screwing around is writing it down" -adam savage Flowchart for Recommended plan of action. Learn the tried and true way to grow mushrooms Use the Damn search engine After you know what you're doing, take a break Pick a book, Make some chips! Josex said:Don't take the site seriously bro, ain't worth it.
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
|
Quote:
SighLowSighBeen said: Thank you sir. Getting ready to do my first EVER! Gotta make the holes in the SAB real quick then inoculate the agar I made last night. Hopefully they turned out ok but I won't know til I open the pc.
|
Yeti1
Bongologist
Registered: 08/15/16
Posts: 71
Last seen: 6 years, 11 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24191198 - 03/25/17 08:49 AM (7 years, 4 days ago) |
|
|
Lovely simple and effective guide, thanks Bod!
-------------------- She had Mycelium Wings!!!
|
sharpie95
Stranger
Registered: 03/05/17
Posts: 67
Last seen: 6 years, 4 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Yeti1]
#24203771 - 03/29/17 08:34 PM (7 years, 5 hours ago) |
|
|
So..should I have the stuff inside covered with foil and mist, let it settle and wipe my equip with iso? Or flip it over so it's open , mist,then put it over my stuff?
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: sharpie95] 1
#24203860 - 03/29/17 09:07 PM (7 years, 5 hours ago) |
|
|
Wipe stuff then put on table then put sab over then spray your water in the sab
|
sharpie95
Stranger
Registered: 03/05/17
Posts: 67
Last seen: 6 years, 4 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24205933 - 03/30/17 04:34 PM (6 years, 11 months ago) |
|
|
Ic.._then just rewipe with new paper towel iso yeah?
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: sharpie95]
#24205939 - 03/30/17 04:36 PM (6 years, 11 months ago) |
|
|
I guess. I just take the foil off lids and consider the tops sterile still.
|
Sporecupine
Stranger
Registered: 03/20/17
Posts: 10
Last seen: 5 years, 1 month
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Yeti1]
#24210671 - 04/01/17 11:46 AM (6 years, 11 months ago) |
|
|
This is really useful stuff
|
FunGuyZ
Psilly Rabbit
Registered: 12/13/16
Posts: 177
Loc: down the rabbit hole
Last seen: 4 years, 11 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24216490 - 04/03/17 09:11 PM (6 years, 11 months ago) |
|
|
Thanks for this. I don't hate my SAB work anymore.
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: FunGuyZ]
#24216516 - 04/03/17 09:25 PM (6 years, 11 months ago) |
|
|
|
mushtard
mustard boy
Registered: 11/29/16
Posts: 61
Last seen: 2 years, 9 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24262735 - 04/21/17 09:34 PM (6 years, 11 months ago) |
|
|
Thanks!
--------------------
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: mushtard]
#24271015 - 04/25/17 03:45 PM (6 years, 10 months ago) |
|
|
bump
|
tjackjack
Stranger
Registered: 05/08/17
Posts: 10
Last seen: 5 years, 10 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24303852 - 05/08/17 04:31 AM (6 years, 10 months ago) |
|
|
Thanks for the writeup, i'm on it!
|
BeardedDragon
Stranger
Registered: 05/22/17
Posts: 8
Last seen: 3 years, 1 month
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta] 2
#24341627 - 05/22/17 09:07 PM (6 years, 10 months ago) |
|
|
I have one made very similar to this but I have gloves attached to make a sort of GB. So I would be better off if I remove the gloves and just use as a SAB? What is the difference of your arms moving, and the gloves of a GB? Great write up by the way!
|
Bird_Guts
Ser Peniswrinkle
Registered: 05/10/17
Posts: 1,014
Loc: Cold 9 months out of the ...
Last seen: 6 years, 2 months
|
|
Quote:
BeardedDragon said: I have one made very similar to this but I have gloves attached to make a sort of GB. So I would be better off if I remove the gloves and just use as a SAB? What is the difference of your arms moving, and the gloves of a GB? Great write up by the way!
Did you read this thread?
Everything you asked has been answered
--BG--
|
BeardedDragon
Stranger
Registered: 05/22/17
Posts: 8
Last seen: 3 years, 1 month
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Bird_Guts]
#24343666 - 05/23/17 04:58 PM (6 years, 10 months ago) |
|
|
Quote:
Bird_Guts said: Did you read this thread?
Everything you asked has been answered
I must have skipped a few pages, my bad. Thanks for pointing that out.
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
|
the first page?
|
BeardedDragon
Stranger
Registered: 05/22/17
Posts: 8
Last seen: 3 years, 1 month
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24343759 - 05/23/17 05:22 PM (6 years, 10 months ago) |
|
|
It was said in the TEK but I just wanted clarification. Sorry I did miss a few pages.
I found my answers as I have just reread the entire thread.
Again thanks for pointing this out. I will make sure that I have read everything from now on. Again great write up.
Edited by BeardedDragon (05/23/17 05:23 PM)
|
Edmunter
Mr
Registered: 05/01/13
Posts: 5,699
Last seen: 10 days, 22 hours
|
|
|
Ouroboros05
Seeker
Registered: 06/12/17
Posts: 2
Loc: Kitchener, Ontario. Canad...
Last seen: 1 year, 9 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24446890 - 06/30/17 11:44 AM (6 years, 8 months ago) |
|
|
Hey BOD. I am just about to take the plunge and cultivate and your posts and videos have been outstanding reference. After wiping the SAB out with ISO, what is the purpose of spraying the soap and water? Looking forward to taking a crack at my liquid spores to agar tomorrow!
Cheers
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Ouroboros05] 1
#24446893 - 06/30/17 11:47 AM (6 years, 8 months ago) |
|
|
To knock down contaminants. We can't sanitize or sterilize the inside of a sab reliably. We're working with physics to do aseptic work
|
Ouroboros05
Seeker
Registered: 06/12/17
Posts: 2
Loc: Kitchener, Ontario. Canad...
Last seen: 1 year, 9 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24447962 - 06/30/17 07:16 PM (6 years, 8 months ago) |
|
|
Thanks again.
|
ShamanBag
Fake Persona
Registered: 06/26/17
Posts: 146
Loc: Denver, CO
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Ouroboros05]
#24452154 - 07/02/17 01:49 PM (6 years, 8 months ago) |
|
|
So we wipe the SAB with alcohol and then mist with the water and soap? Just making sure the misting is done with the water and soap rather than the alcohol sprayer. Where does the alcohol sprayer come into play?
-------------------- Everything I say here is just for fun. I use the internet to pretend I do things that I would never do in a million years.
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: ShamanBag] 1
#24453123 - 07/02/17 08:31 PM (6 years, 8 months ago) |
|
|
Alcohol spray your gloves if you want
|
the_lucky_duck
Neither lucky nor a duck
Registered: 05/05/17
Posts: 202
Loc: Illinois
Last seen: 1 year, 2 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24477432 - 07/12/17 08:18 AM (6 years, 8 months ago) |
|
|
If you don't have a coffee can to make the holes or are worried about any fumes released from heating a coffee can, you can also use an aluminum dryer vent connector.
Which looks like:
This also works: but can be flimsier depending on the brand.
Easily found at any hardware store for like 2 - 4 bucks and come in different sizes or can be adjustable.
Or if you want to be really cheap pull the one off your own dryer.
Heat on stove top for like 5 min on high if you have electric or on top of a cheap pan if you have open flame/gas stove for a few minutes longer. Remove hot connector from stove with tongs, put it where you want an armhole on the SAB and push down with a thick oven mitt until it pops through.
|
MacPappy
New Guy
Registered: 12/30/16
Posts: 42
Last seen: 6 years, 3 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24501593 - 07/22/17 08:58 PM (6 years, 8 months ago) |
|
|
Quote:
It's worth doing a nice finished job on the melted holes. But if you do a "low temp" melt thru there's less fumes. And there's a buildup of plastic that can be smoothed. It may take three four heat ups to get thru but better than making the can red hot and burning plastic
How wide are the holes on your setup? Also do you think one would benefit having the hole that is your dominant arm slightly higher than the non dominant arm? Or is keeping them even the way to go?
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: MacPappy] 1
#24501598 - 07/22/17 09:00 PM (6 years, 8 months ago) |
|
|
Make them both the slightly bigger size
|
MacPappy
New Guy
Registered: 12/30/16
Posts: 42
Last seen: 6 years, 3 months
|
|
Quote:
Or if you want to be really cheap pull the one off your own dryer.
LMAO
|
MacPappy
New Guy
Registered: 12/30/16
Posts: 42
Last seen: 6 years, 3 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24501677 - 07/22/17 09:49 PM (6 years, 8 months ago) |
|
|
Quote:
bodhisatta said: Make them both the slightly bigger size
Bigger size dominant hole? Seems like the reply doesn't answer the question. Just wanting to clarify.....
-------------------- Willy is da ShIt!
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: MacPappy] 1
#24501800 - 07/22/17 11:01 PM (6 years, 8 months ago) |
|
|
Both holes dominant holes...
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta] 1
#24501801 - 07/22/17 11:01 PM (6 years, 8 months ago) |
|
|
quote that out of context
|
viajero1234
Stranger
Registered: 07/14/17
Posts: 18
Last seen: 6 years, 5 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24510544 - 07/26/17 09:19 PM (6 years, 7 months ago) |
|
|
I was going to use a glove box, thanks for the information, I will use my SAB.
|
Warbler
Stranger
Registered: 08/18/17
Posts: 8
Last seen: 6 years, 4 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: viajero1234]
#24568311 - 08/20/17 09:08 PM (6 years, 7 months ago) |
|
|
Thank you for your writing and work.
--------------------
|
Gunsel
Stranger
Registered: 04/10/17
Posts: 10
Last seen: 4 years, 8 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Warbler]
#24574485 - 08/23/17 03:03 PM (6 years, 7 months ago) |
|
|
Thanks dude
|
KHRIST0PH0R0US
I Am The Walrus
Registered: 08/23/17
Posts: 8
Loc: Taco Bell
Last seen: 6 months, 2 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Gunsel]
#24644159 - 09/19/17 03:11 PM (6 years, 6 months ago) |
|
|
So putting those PVC adapter fittings in the holes is a bad idea? If so is it part of the same idea to make the holes bigger than 6 inches so you do not kick air up as you move?
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
|
I think the pvc drain cleanout adapters are stupid and only make things more bulky. I would opt for biggest arm holes reasonable so its comfortable to move.
I don't bother with caps or flaps or any sort of cover for the holes.
|
Spore me
Mycomidget
Registered: 09/11/17
Posts: 10
Last seen: 6 years, 2 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24653770 - 09/23/17 01:41 PM (6 years, 6 months ago) |
|
|
Again, much gratitude! I plan on using this tek in the next two days. This has been an invaluable find.
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Spore me]
#24653892 - 09/23/17 02:52 PM (6 years, 6 months ago) |
|
|
|
waxbrain
That Fun Guy
Registered: 05/13/17
Posts: 678
Last seen: 2 years, 11 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24654069 - 09/23/17 03:55 PM (6 years, 6 months ago) |
|
|
BOD: wipe the inside of the SAB and the table surface with some alcohol on a paper towel put the SAB on the table and you might want to put a weight on top so it doesn't move around at all put your work inside the box, (or put it on the table then put the SAB over it) spray the water inside the SAB with your sprayer on fine mist mode light your torch and put it on low, I put it on the side of my SAB on the table be prepared mentally for the work you're about to do have everything ready and rehearsed in your mind put the gloves on and wipe them down with iso, wipe your forearms down too ____________________________________________________________________________ whats the water for? is this the point where the soapy water comes in? lightly spray the inside of the box with the soapy water or regular water prior to work?
I'm just a little confused. last time i tried this tek I wiped everything down with 70 iso, got all my work ready, kinda wiped stuff down a bit. Im under the impression you spray soapy water on the sides and top (bottom of bin, using the table as a surface) in the SAB prior? I think this was explained to me before but I want to make sure I've got this right. Or do you just spray regular water to dilute the iso alc? I watched the video but i dont think he said anything about water. - this is the only question i really have. I think I have it right as I didn't get contaminations but double checking in this hobby is really important to me.
I go overboard and turn of the ac/heat, spray area with lysol a bit before work and go to town, so id really like to know about the soapy water. I remember bod saying the bleach water was rarely used (i believe to fight something off)
Thanks everyone. Bod youre the shit. Sorry for being an neurotic idiot.
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: waxbrain]
#24654080 - 09/23/17 03:59 PM (6 years, 6 months ago) |
|
|
|
baconcheese
Stranger
Registered: 10/11/17
Posts: 16
Last seen: 1 year, 4 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24703405 - 10/11/17 08:41 PM (6 years, 5 months ago) |
|
|
Been using this site for a couple years now, but just now made an account to tell you this Tek is
Also, i used a 105oz big ass can of this food called 'Hominy' (all the Mexicans out there know what i'm talking about) to drill the holes. You can find it at any supermarket for $3.50.
Keep in mind that some of the plastic will stick to the bottom of the can, so repeat heat-ups will give off a lot of fumes. I set mine on my pre-heated electric stove-top for about 3 minutes at medium.
So, now I've got both some fine lookin holes on my SAB and 2162 calories of what appears to be soggy white corn! Bone apple teeth!
|
icetech
Registered: 08/21/17
Posts: 3,450
Loc: FSM's loving noodles.
Last seen: 5 months, 1 day
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24703469 - 10/11/17 09:06 PM (6 years, 5 months ago) |
|
|
Ok.. color coded bottles is genius.. i always have clear bottles and never remember to label them.. BTW.. the alc spray is just all alc not 50/50 with water or anything?
Edit: to change ARE to IS.. cause my english is turning to shit and i hate that
--------------------
Edited by icetech (10/12/17 07:00 AM)
|
tryptkaloids
Learner
Registered: 02/08/15
Posts: 12,650
Loc: Exact Center
Last seen: 42 minutes, 10 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: icetech]
#24703489 - 10/11/17 09:14 PM (6 years, 5 months ago) |
|
|
70% iso straight outta the bottle
-------------------- "Remember, kids, the difference between science and screwing around is writing it down" -adam savage Flowchart for Recommended plan of action. Learn the tried and true way to grow mushrooms Use the Damn search engine After you know what you're doing, take a break Pick a book, Make some chips! Josex said:Don't take the site seriously bro, ain't worth it.
|
Variegated
Pressure cooker operator
Registered: 01/15/17
Posts: 820
Last seen: 2 years, 5 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: tryptkaloids]
#24703570 - 10/11/17 09:47 PM (6 years, 5 months ago) |
|
|
I have a hars time seeing in the box when im doing transfers and stuff. I was thinking of cutting the front off the box and replacing it with a real clear piece of plexiglass siliconed back on to make it easier to see. Any thoughts on this?
|
tryptkaloids
Learner
Registered: 02/08/15
Posts: 12,650
Loc: Exact Center
Last seen: 42 minutes, 10 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Variegated]
#24703591 - 10/11/17 10:03 PM (6 years, 5 months ago) |
|
|
you could, I sit level with the holes and peer in through them. I've heard of a lot of people having their head above the box but I use mine upright and the lid is black. plus that sounds uncomfortable
-------------------- "Remember, kids, the difference between science and screwing around is writing it down" -adam savage Flowchart for Recommended plan of action. Learn the tried and true way to grow mushrooms Use the Damn search engine After you know what you're doing, take a break Pick a book, Make some chips! Josex said:Don't take the site seriously bro, ain't worth it.
|
icetech
Registered: 08/21/17
Posts: 3,450
Loc: FSM's loving noodles.
Last seen: 5 months, 1 day
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Variegated]
#24704114 - 10/12/17 06:58 AM (6 years, 5 months ago) |
|
|
Quote:
Variegated said: I have a hars time seeing in the box when im doing transfers and stuff. I was thinking of cutting the front off the box and replacing it with a real clear piece of plexiglass siliconed back on to make it easier to see. Any thoughts on this?
I have my sab holes higher up in the box like 1/3 from the top and angle my head so i can look through the arm hole when i work with a syringe or anything like that. I can't see 1 drop or 50 through the plastic..
One person on here told me they cut a square hole in the top and covered it with cling film as a window.. but meh.. thats like work
--------------------
|
icetech
Registered: 08/21/17
Posts: 3,450
Loc: FSM's loving noodles.
Last seen: 5 months, 1 day
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: tryptkaloids]
#24704117 - 10/12/17 07:00 AM (6 years, 5 months ago) |
|
|
Quote:
tryptkaloids said: 70% iso straight outta the bottle
Thank you.
--------------------
|
Diastamasta
Man-Bee
Registered: 08/28/17
Posts: 69
Last seen: 3 years, 8 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: icetech]
#24708551 - 10/14/17 02:36 AM (6 years, 5 months ago) |
|
|
Question... In the tek you say to first place your work into the sab THEN spray with the inside of the SAB with the soapy mix on fine spray. I would think this this would bring the dirty air down onto whatever is in the SAB at the time. Would it be better to first clean the air then place things into it?
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Diastamasta]
#24709045 - 10/14/17 10:14 AM (6 years, 5 months ago) |
|
|
Then everything has to go thru arm holes. Fuck that
|
mushboy
modboy
Registered: 04/24/05
Posts: 32,643
Loc: where?
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24709116 - 10/14/17 10:35 AM (6 years, 5 months ago) |
|
|
i lay some paper towels over my items in the sab, spray the box, remove the towels. smoke a bowl. do work.
|
icetech
Registered: 08/21/17
Posts: 3,450
Loc: FSM's loving noodles.
Last seen: 5 months, 1 day
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: mushboy]
#24709203 - 10/14/17 11:03 AM (6 years, 5 months ago) |
|
|
Ah.. i have been wiping jars down with iso then putting them in right before working.. will start loading the box first.
--------------------
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: icetech]
#24709212 - 10/14/17 11:05 AM (6 years, 5 months ago) |
|
|
Im not to worries either way. The spray isn't saving you one way or another
|
hichappy
Noob
Registered: 05/16/17
Posts: 11
Last seen: 3 years, 7 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24724357 - 10/20/17 11:40 AM (6 years, 5 months ago) |
|
|
I know i am late to the game but thanks for the info!
My sab is way over built and I broke it last time i used it. I used the drain adapters and int he process of pulling my arm out torqued one and it cracked the bin. In need of a new SAB and I like this method, simple and straight forward.
|
dankskank
Stranger
Registered: 10/26/17
Posts: 3
Last seen: 5 years, 8 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24782445 - 11/14/17 12:24 PM (6 years, 4 months ago) |
|
|
This is awesome! Thank you!
|
Ullr
Stranger
Registered: 10/27/17
Posts: 93
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: dankskank]
#24783984 - 11/15/17 04:38 AM (6 years, 4 months ago) |
|
|
Thanks as fuck
|
sceebo
Mr. Natural
Registered: 11/18/15
Posts: 22
Loc: Way Out West
Last seen: 4 years, 10 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Ullr]
#24811297 - 11/28/17 09:16 AM (6 years, 3 months ago) |
|
|
Thanks, BOD! I built my first GB in 1975. It was a cardboard box with elbow length gloves and a poly window taped in place. Spores from Mya Bells. Man, I love Sterilite clear totes! In the last two years I’ve really had fun with science while making many upgrades to my techniques and practices primarily by searching this forum. I love my new SAB, thanks BOD. I finally have enough room to really work and continue to make progress toward less contamination. I’m hanging onto my forced air HEPA filter booth because it was fun to build and it really works well. Precipitating contaminants in a mist of soapy water is a great breakthrough in sanitation for me. Thanks for the tip. I’ve also switched to 70% alcohol from 91% after coming to realize how much more effective it is for sanitation. Another great tip. The routine I’ve settled into is inoculating LC’s (dextrose with light malt) with spores. (Great LC lids from Shroom Supply) I’m using well populated LCs to create grain masters, then G2G and finally to the unmodified 54 quart tubs with coir. One 24 watt twist 6500 bulb in cone reflector per tub when fruiting. I’m basically following the BOD SAF format for everything using 8 tubs. Geeze! I’m starting to look like Sheldon! lol Great science, great hobby and great work by BOD consolidating a lot of very useful information to share with fellow mycologists.
Edited by sceebo (11/28/17 09:19 AM)
|
tryptkaloids
Learner
Registered: 02/08/15
Posts: 12,650
Loc: Exact Center
Last seen: 42 minutes, 10 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: sceebo]
#24811358 - 11/28/17 10:00 AM (6 years, 3 months ago) |
|
|
Quote:
inoculating LC’s (dextrose with light malt) with spores.
that's not a great idea.
Quote:
bodhisatta said: on the other hand when you look at spores from a syringe or a print under the scope. you see all sorts of other crud that may be viable or non living debris including organic and non organic matter.
This is why you should always use agar to start off a LC if you ever chose to use a LC. LC like beer is a environment where any competing organism can just grow like mad. if you start with spores which are in the next few images, you will see just how much trouble you can get yourself into. a single bacteria floating around can double in a few hours and exponential growth boom you have a completely infected jar and it may not even smell or appear infected due to the low levels of nutrition in a LC(a few percent sugars 2-5% usually)
- https://www.shroomery.org/forums/showflat.php/Number/20947447
-------------------- "Remember, kids, the difference between science and screwing around is writing it down" -adam savage Flowchart for Recommended plan of action. Learn the tried and true way to grow mushrooms Use the Damn search engine After you know what you're doing, take a break Pick a book, Make some chips! Josex said:Don't take the site seriously bro, ain't worth it.
|
sceebo
Mr. Natural
Registered: 11/18/15
Posts: 22
Loc: Way Out West
Last seen: 4 years, 10 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: tryptkaloids]
#24811899 - 11/28/17 01:45 PM (6 years, 3 months ago) |
|
|
My view is that any idea is a good idea if it produces good results. Right now, I’m just having really good luck with LC’s. I have five different species that of been colonizing at 84° In a home made incubator for about three weeks. I’m done with them for now so I just moved them to the refrigerator for use much later. Call me a nut, but I just love putting the jars on the magnetic stirrer and watching those my myllium clumps busting up. The grain masters that I made from the LCs colonized in less than a week with no signs of contamination. (lucky me) I DID use a generous squirt of LC for each grain master. I just used my new SAF SAB to do my G2G from the Masters to 28 quarts. What a nice new workspace! We’ll see how I did with clean and sanitary practices in a day or two
Edited by sceebo (11/29/17 08:21 AM)
|
bacillus
Very Serious Mushronomer
Registered: 12/07/17
Posts: 394
Loc: Central Europe
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#24861651 - 12/22/17 08:36 AM (6 years, 3 months ago) |
|
|
This thread has opened my third eye
Why not add chemistry to physics and use isopropanol as spray?
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bacillus] 1
#24861665 - 12/22/17 08:45 AM (6 years, 3 months ago) |
|
|
Why spray an unnecessary sanitizer around. Waste of money. And potentially a bomb situation
|
FatDabs
Stranger
Registered: 01/11/18
Posts: 1
Last seen: 5 years, 10 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta] 1
#24915019 - 01/15/18 05:07 AM (6 years, 2 months ago) |
|
|
I just wanted to say that this was very helpful in assisting me create my first SAB for my first time trying to grow.
|
shade12435
Registered: 03/09/10
Posts: 69
Last seen: 1 year, 5 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: FatDabs]
#24918867 - 01/16/18 05:10 PM (6 years, 2 months ago) |
|
|
Thanks as always, all your teks are great!
|
Sweartome
Stranger
Registered: 01/22/18
Posts: 1
Last seen: 6 years, 2 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: shade12435]
#24932947 - 01/22/18 03:36 AM (6 years, 2 months ago) |
|
|
So glad I found this. Researching everything you've added here before getting started. Excellent presentation. Thank you!
|
arkybarky
Stranger
Registered: 10/27/17
Posts: 2
Last seen: 4 years, 2 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25006313 - 02/19/18 05:52 PM (6 years, 1 month ago) |
|
|
Again, thank you Bod. Every good forum has some simplification of unnecessarily complicated shit, and this is it. I used everything in your EASY AF list and it has worked flawlessly twice. Can't thank you enough!
|
thelanzii
Registered: 11/13/12
Posts: 5,434
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: arkybarky]
#25032148 - 03/01/18 03:19 PM (6 years, 28 days ago) |
|
|
why do you flip the SAB upside down?
my folding table is uneven when i flip it
i see frank doesn't flip his
|
tryptkaloids
Learner
Registered: 02/08/15
Posts: 12,650
Loc: Exact Center
Last seen: 42 minutes, 10 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: thelanzii]
#25032167 - 03/01/18 03:27 PM (6 years, 28 days ago) |
|
|
It helps to be able to look down on your work instead of in the front. Either works. I use mine right side up because I don't have a big enough table in my shroom
-------------------- "Remember, kids, the difference between science and screwing around is writing it down" -adam savage Flowchart for Recommended plan of action. Learn the tried and true way to grow mushrooms Use the Damn search engine After you know what you're doing, take a break Pick a book, Make some chips! Josex said:Don't take the site seriously bro, ain't worth it.
|
13shrooms
Lightning Shaman
Registered: 01/01/09
Posts: 26,719
Loc: IN ETHERS TORSION FIELD
|
|
I get more surface area to work on the inner side of the lid.. just a bit more
-------------------- A M U Click here ^ for the AMU forum VVV AMUs Free Active/Edible/Exotic Spore Print or Syringe or Edible Culture Trade Thread VVV "Man is the sex organ of the machine world" ~ Marshall McLuhan
|
tanukihimself
Stranger
Registered: 08/29/11
Posts: 23
Last seen: 2 years, 7 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25033794 - 03/02/18 02:28 PM (6 years, 27 days ago) |
|
|
awesome MT
|
thelanzii
Registered: 11/13/12
Posts: 5,434
|
|
do you remake the soap sanitizer every time you work with your sab?
do you just microwave it to make the soapy water warm?
|
tryptkaloids
Learner
Registered: 02/08/15
Posts: 12,650
Loc: Exact Center
Last seen: 42 minutes, 10 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: thelanzii]
#25047613 - 03/07/18 11:07 PM (6 years, 22 days ago) |
|
|
I usually omit the spray,because I'm confident my technique is down but I would only change it every month or two when I did
-------------------- "Remember, kids, the difference between science and screwing around is writing it down" -adam savage Flowchart for Recommended plan of action. Learn the tried and true way to grow mushrooms Use the Damn search engine After you know what you're doing, take a break Pick a book, Make some chips! Josex said:Don't take the site seriously bro, ain't worth it.
|
thelanzii
Registered: 11/13/12
Posts: 5,434
|
|
i like to follow teks to the t
did u just use it a room temp?
|
tryptkaloids
Learner
Registered: 02/08/15
Posts: 12,650
Loc: Exact Center
Last seen: 42 minutes, 10 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: thelanzii]
#25047671 - 03/07/18 11:31 PM (6 years, 22 days ago) |
|
|
Yep, give it a shake first. But it should still be plenty viscous. I wouldn't worry about temperature.
-------------------- "Remember, kids, the difference between science and screwing around is writing it down" -adam savage Flowchart for Recommended plan of action. Learn the tried and true way to grow mushrooms Use the Damn search engine After you know what you're doing, take a break Pick a book, Make some chips! Josex said:Don't take the site seriously bro, ain't worth it.
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
|
Warming up soap spray that's a new one for me. I wouldn't
|
ninono
Stranger
Registered: 02/22/18
Posts: 10
Last seen: 5 years, 9 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25055771 - 03/11/18 08:42 AM (6 years, 18 days ago) |
|
|
Will try out, when I'm big in this bussiness
|
jblue1408
Stranger
Registered: 03/11/18
Posts: 4
Last seen: 5 years, 11 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25064888 - 03/15/18 08:32 AM (6 years, 14 days ago) |
|
|
Nice!
|
nothingtohide
psychonaut
Registered: 06/11/17
Posts: 89
Last seen: 3 years, 10 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25072944 - 03/18/18 11:52 AM (6 years, 11 days ago) |
|
|
thanks, man. Never knew gloves attached was a no-go... I'm new to the game but I'm seeing you on this website a lot so I'm gonna start following your teks a lot more. Also going to try sterilizing some grain today with the simple polyfill lids. yay! mush love
-------------------- "When you take Psilocybin, it takes you." - Terence Mckenna <3
|
Shroumz
Stranger
Registered: 02/07/18
Posts: 2
Last seen: 5 years, 10 months
|
|
Thanks Bod! Learned some new things here. Especially why glovebox is a nono (i was going to build one)
|
JHOVA
Post whore
Registered: 02/17/17
Posts: 4,727
Loc:
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Shroumz]
#25112849 - 04/04/18 06:16 AM (5 years, 11 months ago) |
|
|
Bod the part where you recommend wiping the entire damn sab with alcohol is not helping anyones contam rate drop and potentially having them liberally spray alcohol creating a bomb. Please consider removing that one line, save a kitten.
-------------------- 🅃 🄴 🄰 🄼 🄲 🄻 🄸 🄽 🄶 🅆 🅁 🄰 🄿
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: JHOVA]
#25112949 - 04/04/18 07:13 AM (5 years, 11 months ago) |
|
|
You wipe it it dries. I like to disinfect the sab before i use it because when its not a sab its storage
|
ttching8475
Spawn
Registered: 03/01/18
Posts: 739
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25120028 - 04/07/18 05:38 AM (5 years, 11 months ago) |
|
|
-------------------- LAGM 2.022
|
Dataphyle
Stranger
Registered: 05/14/18
Posts: 6
Loc: Alberta, Canada
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25257670 - 06/09/18 09:39 AM (5 years, 9 months ago) |
|
|
Bod you have made so many aspects of this hobby so much more accessible. It's like the (now outdated) Mushroom growers guide written by the McKenna brothers updated for the 21st Century. Cheers
|
NorthernKronic
Stranger
Registered: 05/23/18
Posts: 112
Last seen: 5 years, 2 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25274339 - 06/17/18 11:39 AM (5 years, 9 months ago) |
|
|
Going to get one of these setup today so I can do my first MS > Agar and start my clean up. Thanks for all your super helpful easy AF tutorials, if not for them I would be trying PF Tek... And who wants to do that anyway hahahahaha
|
GratefulGal
Red Headed Stranger
Registered: 07/08/18
Posts: 2
Loc: DOTF
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25316611 - 07/09/18 11:22 AM (5 years, 8 months ago) |
|
|
I would first like to say thank you! You have singlehandedly inspired me to leave my comfort zone of the old PF Tek with all of your great easy AF Teks and videos! I've had much success over the years with PF cakes, but I knew there had to be a better way. I haven't done any in a while, and I'm so glad I found you before I started back up!!! I'm about to go for it!
Anyways, is there a reason you couldn't just use the lid as the bottom of the SAB instead of setting on a table, towel, etc? My table is wood, which seems it would harbor contams, and so does a towel... Sorry if it's a stupid question, just trying to increase my chance of first time success!
|
Sivarted
Stranger
Registered: 08/22/15
Posts: 1,084
Last seen: 4 months, 6 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: GratefulGal] 1
#25316619 - 07/09/18 11:28 AM (5 years, 8 months ago) |
|
|
There are always contams inside a SAB, period. The still air keeps air currents from swirling them around the box, and ideally falling to the floor of the SAB due to gravity. Which is why you dont use it immediately after setting it up/wiping down/etc.
The point of a towel is not to be contam-free, but to have something for contams ti stick to when they fall.
|
pixelpopper
Crap Artist
Registered: 09/20/13
Posts: 4,022
Loc: Dreamland
Last seen: 5 months, 8 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Sivarted] 1
#25316688 - 07/09/18 12:10 PM (5 years, 8 months ago) |
|
|
I've used the lid for my bottom before, and now I use the SAB lid side up, like it would normally sit. I don't use towels, and now I also work dry in the SAB.
The essential point is still air
|
tryptkaloids
Learner
Registered: 02/08/15
Posts: 12,650
Loc: Exact Center
Last seen: 42 minutes, 10 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: pixelpopper]
#25316710 - 07/09/18 12:21 PM (5 years, 8 months ago) |
|
|
it doesn't matter if there's contams in the sab as long as they dont get on the agar/in the grain. Keep them out of the air and you're good
-------------------- "Remember, kids, the difference between science and screwing around is writing it down" -adam savage Flowchart for Recommended plan of action. Learn the tried and true way to grow mushrooms Use the Damn search engine After you know what you're doing, take a break Pick a book, Make some chips! Josex said:Don't take the site seriously bro, ain't worth it.
|
Sivarted
Stranger
Registered: 08/22/15
Posts: 1,084
Last seen: 4 months, 6 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: pixelpopper] 1
#25316716 - 07/09/18 12:23 PM (5 years, 8 months ago) |
|
|
The air isnt totally still as long as you're working inside it, no matter how smooth and controlled your movements are. Moisture will grab contams and keep them there.
Of course, some people do sterile work with nothing but a nearby flame (my understanding is that this is pretty standard lab practice)
So do whatever works.
Honestly I might give the flame thing a shot and just work next to my gas stove. That would be so much easier than a SAB.
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Sivarted]
#25316741 - 07/09/18 12:38 PM (5 years, 8 months ago) |
|
|
You may use the lid as the floor but its not nearly as flat as a table
|
pixelpopper
Crap Artist
Registered: 09/20/13
Posts: 4,022
Loc: Dreamland
Last seen: 5 months, 8 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Sivarted] 1
#25316755 - 07/09/18 12:46 PM (5 years, 8 months ago) |
|
|
Quote:
Sivarted said: The air isnt totally still as long as you're working inside it, no matter how smooth and controlled your movements are. Moisture will grab contams and keep them there.
Yeah I realize this and I am not encouraging anyone to dry SAB unless they want to try it while realizing its a bit more risky.
For me, it has worked great so far.
My main point was that its about the still air, not where your lid is at, etc.
Edited by pixelpopper (07/09/18 12:47 PM)
|
GratefulGal
Red Headed Stranger
Registered: 07/08/18
Posts: 2
Loc: DOTF
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25316899 - 07/09/18 02:24 PM (5 years, 8 months ago) |
|
|
I was wondering if it would possibly let in more air. Thank you all for sharing your insight- I'm excited AF to see how this goes!
|
tryptkaloids
Learner
Registered: 02/08/15
Posts: 12,650
Loc: Exact Center
Last seen: 42 minutes, 10 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: GratefulGal]
#25316901 - 07/09/18 02:28 PM (5 years, 8 months ago) |
|
|
Air in the room should be still anyway
-------------------- "Remember, kids, the difference between science and screwing around is writing it down" -adam savage Flowchart for Recommended plan of action. Learn the tried and true way to grow mushrooms Use the Damn search engine After you know what you're doing, take a break Pick a book, Make some chips! Josex said:Don't take the site seriously bro, ain't worth it.
|
Ginge
Sponge Brain
Registered: 07/08/18
Posts: 202
Loc: Rocky Mountains
Last seen: 5 years, 2 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: tryptkaloids]
#25326503 - 07/14/18 06:55 PM (5 years, 8 months ago) |
|
|
If you are reading this simple AF tek, good job! I love it Bod, thank you! Just used my SAB to SS some Golden Teacher into Pasty's plates. I love the community and knowledge sharing! I hope to share pictures of success soon.
The box you are looking at is TOO SMALL! Buy the bigger box to make your SAB. Mine is 66 qt and I can already tell will be too small.
-------------------- Ginge
|
BatchScript
Stranger
Registered: 10/21/17
Posts: 10
Last seen: 5 years, 5 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25328343 - 07/15/18 06:07 PM (5 years, 8 months ago) |
|
|
|
C45
Stranger
Registered: 01/23/17
Posts: 7
Last seen: 3 years, 10 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: BatchScript]
#25379021 - 08/10/18 07:03 AM (5 years, 7 months ago) |
|
|
Simple!
|
WhymeGod
Disinformationist
Registered: 08/12/18
Posts: 11
Loc: Earth
Last seen: 5 years, 6 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: C45]
#25383823 - 08/12/18 03:10 PM (5 years, 7 months ago) |
|
|
First Post...but I like my dominate hand hole to be a bit higher than my other hand, this may help some folks a bit with controlling movement when working..
|
MidnightTopher
Stranger Danger
Registered: 06/22/18
Posts: 195
Loc: AMERICA!
Last seen: 1 year, 7 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: WhymeGod]
#25426349 - 08/31/18 02:09 PM (5 years, 6 months ago) |
|
|
Quote:
WhymeGod said: First Post...but I like my dominate hand hole to be a bit higher than my other hand, this may help some folks a bit with controlling movement when working..
When I was envisioning myself making and using a SAB, I was thinking about this.. or even having a lower hole on the long side of the box and a higher hole on the short side of my dominant hand.. but I wasn't sure if that would fuck with the stillness of the air.
This works for you?
-------------------- I'm me.
|
John1212
Stranger
Registered: 08/31/18
Posts: 7
Last seen: 5 years, 4 months
|
|
Nice! This will come in handy bro
|
Thethicctricc
Stranger
Registered: 09/10/18
Posts: 10
Last seen: 4 years, 2 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25451993 - 09/11/18 10:35 AM (5 years, 6 months ago) |
|
|
Beautiful
|
Johnny.rotten
Traveller
Registered: 08/16/18
Posts: 159
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25457673 - 09/13/18 02:46 PM (5 years, 6 months ago) |
|
|
I made it with the 108 Quart. It works great for agar, but i'm now realizing that it might not have the height to make grain to grain transfers with quart jars. I been looking for a higher bin locally, but can't find one. Thinking I might try to dub-tub 2 of these for a SAB for gtg
--------------------
|
WhymeGod
Disinformationist
Registered: 08/12/18
Posts: 11
Loc: Earth
Last seen: 5 years, 6 months
|
|
@MidnightTopher
From what I've read/learned from experience is that my suggestion works best for me. I've not had any issues having the dominant had slightly higher than my other hand. I found that when I pour agar, this makes it easier for me, I've prolly tried like six or seven different variations of hand holes, until I found the one that was most comfortable/convenient for me. I have not had contam issues due to hole placement.
Experiment a little and find what works best for you. (try different variations on the same tub and go through the motions of doing work inside your SAB, that way your not buying a bazillion tubs to get your hands comfortable.-just by pretending
Edited by WhymeGod (09/15/18 05:25 PM)
|
13shrooms
Lightning Shaman
Registered: 01/01/09
Posts: 26,719
Loc: IN ETHERS TORSION FIELD
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: WhymeGod]
#25467061 - 09/17/18 12:20 PM (5 years, 6 months ago) |
|
|
-------------------- A M U Click here ^ for the AMU forum VVV AMUs Free Active/Edible/Exotic Spore Print or Syringe or Edible Culture Trade Thread VVV "Man is the sex organ of the machine world" ~ Marshall McLuhan
|
mycorry
The Empirical
Registered: 06/01/18
Posts: 387
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: 13shrooms]
#25467259 - 09/17/18 01:35 PM (5 years, 6 months ago) |
|
|
Amazing write-up! Thank you for this, Easy AF guides are game changers.
In what instances would you use the Chlorine spray? When would you used it and why?
-------------------- My Trade Lists
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: mycorry] 2
#25467422 - 09/17/18 02:50 PM (5 years, 6 months ago) |
|
|
I would never use chlorine/bleach spray for anything other than my bathroom or cleaning up a tub after a substrate had a mold explosion
|
someguy250
Registered: 09/16/18
Posts: 9
Last seen: 8 months, 5 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25479492 - 09/21/18 11:15 PM (5 years, 6 months ago) |
|
|
Nice probably the best breakdown for me
|
someguy250
Registered: 09/16/18
Posts: 9
Last seen: 8 months, 5 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: someguy250]
#25481621 - 09/22/18 08:15 PM (5 years, 6 months ago) |
|
|
awesome. definitely prefer these Bod teks
|
TXBD
StrangerthanFiction
Registered: 06/24/18
Posts: 261
Loc: Tejas
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: someguy250]
#25488129 - 09/25/18 01:37 PM (5 years, 5 months ago) |
|
|
I finally got my big girl panties on and followed the tek. It took about 5 minutes and I was taking my time.
Heated the can up on the stove and pressed it through the tub. Wham! Bam!
Shazam!
-------------------- I overdo everything and nothing at the same time. Every time, All the time, and some times too..
|
bendrider
Dirt Monkey
Registered: 08/08/18
Posts: 190
Last seen: 5 months, 8 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25515130 - 10/05/18 03:53 PM (5 years, 5 months ago) |
|
|
Quote:
bodhisatta said:
Quote:
AK1000 said: Another thing I'll add is that don't be afraid of making the arm-holes larger than 6 inches because it lessens the amount of air-disruption as you move around.
Quote:
emosavagerabbit said: My first crack a SAB involved trying to saw the holes, which lead to cracks...
Frustrated, and looking for a reason to roast a coffee can on the stove, I recalled taking notes on Bod's glove box. Fast forward 15 minutes, and I melted two perfect holes in my tote!
It took longer to file the melted holes than it did to make them. Will second doing this in a well ventilated place.
It's worth doing a nice finished job on the melted holes. But if you do a "low temp" melt thru there's less fumes. And there's a buildup of plastic that can be smoothed. It may take three four heat ups to get thru but better than making the can red hot and burning plastic
Great advice, I am going to make a SAB tonight. Thanks for the tip.
|
Ajr12100
Stranger
Registered: 08/21/18
Posts: 66
Last seen: 2 years, 9 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bendrider]
#25542825 - 10/16/18 06:03 PM (5 years, 5 months ago) |
|
|
Does using Saran Wrap to create a lid and then cutting arm holes in the wrap sound like a good idea? Then I have a box that I can use for storage/whatever else I want while I don’t need a SAB
-------------------- “I'm a survivor too. with enough sense to live like an outlaw 30 sum years, and get away with it.” -Hippie3 “Embrace your inner agar. Do not fear it”
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Ajr12100]
#25542936 - 10/16/18 06:44 PM (5 years, 5 months ago) |
|
|
Probably but seems bootleg to me.
|
Bobbio
The Slimy One...
Registered: 10/12/15
Posts: 75
Loc: Wonderland
Last seen: 1 year, 10 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Ajr12100]
#25543199 - 10/16/18 08:45 PM (5 years, 5 months ago) |
|
|
Quote:
Ajr12100 said: Does using Saran Wrap to create a lid and then cutting arm holes in the wrap sound like a good idea? Then I have a box that I can use for storage/whatever else I want while I don’t need a SAB
I used to do this with some help with some packing tape to stiffen things up when I used to use a SAB. Had too many run ins through the years with people asking "why is theres holes cut in the side of that tote?" I got rid of my tote with the big holes in the side. It was literally the only thing I've ever had that raised eyebrows with the non knowers. And since the tote was only good for being a SAB and nothing else when not in use it would wind up in the hallway closet or in the garage or some random place and yeah....
I'm not gonna lie though. It sucks. It really sucks when you forget to put something in the tub you need that would've been easier to get in there before the saran wrap... its janky ass fuck
Which leads to... just not using one and being quick like a tiga
-------------------- "We all live incredibly different lives each with our own tragedy and triumph, and this one, incredible, amazingly border shattering and life altering thing we call mycology has bound us all together. Through a combination of technology, research, and strife we have found a place that unites us like a mycelial network of souls to a science that brings us warmth and comfort. It's a pleasure knowing all of you." -TravelAgency
|
13shrooms
Lightning Shaman
Registered: 01/01/09
Posts: 26,719
Loc: IN ETHERS TORSION FIELD
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Ajr12100]
#25543224 - 10/16/18 08:58 PM (5 years, 5 months ago) |
|
|
Quote:
Ajr12100 said: Does using Saran Wrap to create a lid and then cutting arm holes in the wrap sound like a good idea? Then I have a box that I can use for storage/whatever else I want while I don’t need a SAB
https://www.shroomery.org/forums/showflat.php/Number/11107712#11107712
yup, this is a link to an agar tek BUT if you scroll to the lower part of that post you see just what you are talking about, a cardboard SAB with plastic wrap ffor viewing
-------------------- A M U Click here ^ for the AMU forum VVV AMUs Free Active/Edible/Exotic Spore Print or Syringe or Edible Culture Trade Thread VVV "Man is the sex organ of the machine world" ~ Marshall McLuhan
|
Vibe_Enthusiast
Mushroom Technician
Registered: 10/16/18
Posts: 2,420
Loc: GPS signal lost..
Last seen: 2 months, 16 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: 13shrooms]
#25559942 - 10/23/18 08:13 AM (5 years, 5 months ago) |
|
|
So with the torch, you keep it on the outside of the SAB? heat the needle then go back into the SAB for the inoculation ?
|
teladi
FUNKSOULBROTHER
Registered: 06/27/17
Posts: 1,189
Loc: South Africa
Last seen: 7 months, 18 days
|
|
Quote:
Vibe_Enthusiast said: So with the torch, you keep it on the outside of the SAB? heat the needle then go back into the SAB for the inoculation ?
Yep! Having it inside is problematic.
--------------------
|
C45
Stranger
Registered: 01/23/17
Posts: 7
Last seen: 3 years, 10 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: teladi]
#25576587 - 10/29/18 02:46 PM (5 years, 4 months ago) |
|
|
Far out
|
medicinalmush
Stranger
Registered: 10/30/18
Posts: 4
Last seen: 5 years, 2 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: C45]
#25586334 - 11/02/18 09:02 AM (5 years, 4 months ago) |
|
|
thanks for putting this out there. I like to keep it simple as well.
|
captmarc
Noob
Registered: 09/16/18
Posts: 51
Last seen: 1 year, 6 months
|
|
Glad I read this first, would have made arm holes too close together. Thanks for making it easier for us noobs!
|
jamslam
Meanderer
Registered: 11/25/18
Posts: 10
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25638548 - 11/25/18 03:31 PM (5 years, 4 months ago) |
|
|
First I tried this with 66q tub and a coffee can, and then had to toss it because it was WAY too confining. Impossible to work with. I then made one with 110q tub and 105oz can of Hominy. It works absolutely fantastic. Thanks.
|
Papa Emeritus
Satans Little Helper
Registered: 10/30/18
Posts: 111
Last seen: 3 years, 6 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: captmarc]
#25643644 - 11/27/18 07:58 PM (5 years, 3 months ago) |
|
|
Thanks for all the time you put into these TEKS, BOD. Been reading voraciously! Thanks again!
|
whitewombat
Ancient Alien
Registered: 12/03/18
Posts: 50
|
|
Thanks Bod!
|
RoyalCakes
Stranger
Registered: 02/28/18
Posts: 1
Last seen: 10 months, 19 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25722521 - 01/04/19 09:45 AM (5 years, 2 months ago) |
|
|
Really nice straight forward tek, thanks!
|
qiffrox
Stranger
Registered: 01/02/19
Posts: 10
Last seen: 5 years, 18 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: RoyalCakes]
#25761133 - 01/22/19 03:15 PM (5 years, 2 months ago) |
|
|
depth guide.
|
Fields
De por alli
Registered: 07/16/18
Posts: 28
Loc: Costa Rica
Last seen: 3 years, 1 day
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: qiffrox]
#25778762 - 01/30/19 10:09 AM (5 years, 1 month ago) |
|
|
Glove box = no no, thank gods too, what an unwieldy thing
|
jd777
Mr
Registered: 11/06/18
Posts: 2
Last seen: 2 years, 1 day
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25783867 - 02/01/19 01:45 PM (5 years, 1 month ago) |
|
|
Great simple Tek. Thanks!
|
Akamykedee
Stranger
Registered: 01/27/19
Posts: 39
Last seen: 9 months, 25 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: cronicr]
#25793507 - 02/05/19 06:59 PM (5 years, 1 month ago) |
|
|
Are you using a lid? Or just placing tub on clean surface? Sorry,hard to tell by the picture.
|
Failboat
Fuck Up
Registered: 02/01/18
Posts: 8,736
Last seen: 13 days, 15 hours
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Akamykedee]
#25793511 - 02/05/19 07:04 PM (5 years, 1 month ago) |
|
|
I put it down on a flat clean surface. I used to put it on the lid.
|
Akamykedee
Stranger
Registered: 01/27/19
Posts: 39
Last seen: 9 months, 25 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Failboat]
#25793521 - 02/05/19 07:08 PM (5 years, 1 month ago) |
|
|
Hard to tell if bod uses a lid or not,dont look like it though..thanks man
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Akamykedee]
#25793542 - 02/05/19 07:23 PM (5 years, 1 month ago) |
|
|
It says put stuff on a table put sab over top. You can see the handle latches facing downwards on a flat table in the first post
|
Drohammad
Researching Rookie
Registered: 01/30/19
Posts: 6
Last seen: 4 years, 9 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25795792 - 02/06/19 06:23 PM (5 years, 1 month ago) |
|
|
Some things to keep in mind when making a SAB... 1. When shopping for a sab, try to find one with a relatively flat lid. You see tha weight in mine? Thats cus the lid goes in so much it makes everything lean or uneven, the weight it to pop it down for a more level workspace. 2. When shopping for a sab tote, look for one that also has flat and very clear plastic. This one pictured, it looks clear, but looking up close it is kinda hard to see detail through it. Flat sides not fancy bends! 3. Make sure you make your arm holes a cofortable distance apart, so that you can work well, and have manuverability. 4. I heard an elevated workspace helps a lot with contams, what you see pictured is a silverwear holder meant for the inside of a drawer, they had a few styles but this one had a perfect flatness and square wire holes for the job. Its sitting on a papertowel dampened from wiping up lysol sprayed on top n bottom n throughout the sab, keeps it from sliding. 5. Something underneath to keep sab from moving on slipwpery services, i used a rug meant for bathroom, sprayed down pretty good with 70% iso. Thats it for now, thought I’d share to save others from the hastle this particular sab has brought me...
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Drohammad] 2
#25795793 - 02/06/19 06:24 PM (5 years, 1 month ago) |
|
|
Use a table as the lid. Its flatter than any lid
|
13shrooms
Lightning Shaman
Registered: 01/01/09
Posts: 26,719
Loc: IN ETHERS TORSION FIELD
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta] 1
#25796710 - 02/07/19 06:46 AM (5 years, 1 month ago) |
|
|
I thought the point of your Simple AF series was to be so simple all these pages of comments/questions wouldnt be necessary.
well at least thats what I would have figured
-------------------- A M U Click here ^ for the AMU forum VVV AMUs Free Active/Edible/Exotic Spore Print or Syringe or Edible Culture Trade Thread VVV "Man is the sex organ of the machine world" ~ Marshall McLuhan
|
Drohammad
Researching Rookie
Registered: 01/30/19
Posts: 6
Last seen: 4 years, 9 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25801225 - 02/09/19 10:20 AM (5 years, 1 month ago) |
|
|
Good lookin out, i used a towel wet with dish soap on the table as my base last night, much more room!👌
|
qiffrox
Stranger
Registered: 01/02/19
Posts: 10
Last seen: 5 years, 18 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Drohammad]
#25819061 - 02/17/19 02:45 PM (5 years, 1 month ago) |
|
|
tyvm man
|
FatherLube
Stranger
Registered: 12/02/18
Posts: 3
Last seen: 2 years, 3 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: qiffrox]
#25858313 - 03/07/19 11:56 AM (5 years, 22 days ago) |
|
|
Great post, and I think I'm going to use a plastic table from now on.
But I have a question. I've been wrapping my jars in a towel to keep them away from the edge of my all American 25x autoclave. That towel should be pretty clean... Right? So placing that on the table should be ok right? But then again if he doesn't then I shouldn't bother.
|
tryptkaloids
Learner
Registered: 02/08/15
Posts: 12,650
Loc: Exact Center
Last seen: 42 minutes, 10 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: FatherLube]
#25858317 - 03/07/19 12:00 PM (5 years, 22 days ago) |
|
|
should be sterile yes, but a towel doesn't have any use in this hobby IMO/E. just pull your jars in from the sides and you'll be fine
-------------------- "Remember, kids, the difference between science and screwing around is writing it down" -adam savage Flowchart for Recommended plan of action. Learn the tried and true way to grow mushrooms Use the Damn search engine After you know what you're doing, take a break Pick a book, Make some chips! Josex said:Don't take the site seriously bro, ain't worth it.
|
teladi
FUNKSOULBROTHER
Registered: 06/27/17
Posts: 1,189
Loc: South Africa
Last seen: 7 months, 18 days
|
|
The sides shouldn't get so hot that they can cause the jars to crack, though.
|
tryptkaloids
Learner
Registered: 02/08/15
Posts: 12,650
Loc: Exact Center
Last seen: 42 minutes, 10 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: teladi]
#25858905 - 03/07/19 04:50 PM (5 years, 22 days ago) |
|
|
while that's probably true I always make sure they aren't touching because it's easy and I hate losing jars
-------------------- "Remember, kids, the difference between science and screwing around is writing it down" -adam savage Flowchart for Recommended plan of action. Learn the tried and true way to grow mushrooms Use the Damn search engine After you know what you're doing, take a break Pick a book, Make some chips! Josex said:Don't take the site seriously bro, ain't worth it.
|
Spreadtheknowledge
Worker
Registered: 04/09/19
Posts: 237
Loc: Earth
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25933358 - 04/13/19 11:21 PM (4 years, 11 months ago) |
|
|
Are there any downsides to using a tub how it is with the lid and some holes and not using it upside dow with a table as the bottom?
|
hexkrak
VisualDecintigrator
Registered: 12/26/02
Posts: 270
Last seen: 4 years, 7 months
|
|
My lid is not entirely sturdy, and has ridges and channels. Table would just be a better more sturdy surface for me.
-------------------- Always forgive your enemies; nothing annoys them more. --Oscar Wilde
|
iEnter
Stranger
Registered: 03/17/16
Posts: 75
Last seen: 13 days, 18 hours
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25981285 - 05/09/19 06:13 AM (4 years, 10 months ago) |
|
|
Awesome! thanks man!
|
Desert_Delighted
a nice freaking lady
Registered: 05/14/19
Posts: 25
Loc: desert
Last seen: 4 years, 8 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#25993047 - 05/14/19 07:17 PM (4 years, 10 months ago) |
|
|
Fantastic! This answered so many questions for me! Many thanks!
-------------------- "Because everything has its origin And I come going from place to place from the origin" Maria Sabina
|
mrdelimeatslicer
Stranger
Registered: 05/26/19
Posts: 11
Last seen: 4 years, 7 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#26052876 - 06/14/19 07:02 PM (4 years, 9 months ago) |
|
|
Love it, thanks!
|
jbgtaa
extraterrestrial
Registered: 06/09/19
Posts: 1,785
Last seen: 3 years, 5 months
|
|
Quick question: is ozium sufficient to sanitize the interior of a SAB? As in, wiping it with alcohol, spray the towel, orient the SAB, spray the inside? I usually place all my work on the towel and then invert the SAB.
-------------------- If the thunder don't get ya, the lightning will. In another time's forgotten space, your eyes looked through your mother's face. Trade List Forever giving away prints. PM at anytime for a free print.
|
JHOVA
Post whore
Registered: 02/17/17
Posts: 4,727
Loc:
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: jbgtaa] 1
#26102025 - 07/11/19 10:58 AM (4 years, 8 months ago) |
|
|
Use soapy water or nothing. Do not put alcohol in a SAB where you insert a flaming hot scalpel which can ignite alcohol vapor and explode in your face.
-------------------- 🅃 🄴 🄰 🄼 🄲 🄻 🄸 🄽 🄶 🅆 🅁 🄰 🄿
|
jbgtaa
extraterrestrial
Registered: 06/09/19
Posts: 1,785
Last seen: 3 years, 5 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: JHOVA]
#26102054 - 07/11/19 11:19 AM (4 years, 8 months ago) |
|
|
soapy water or nothing...? seriously? First of all, i dont flame my scalpel inside the SAB, and when i do flame my scalpel i cool it with alcohol before use. Why would i use soapy water instead of ozium if im not lighting fire inside? Ive heard of people using lysol.
-------------------- If the thunder don't get ya, the lightning will. In another time's forgotten space, your eyes looked through your mother's face. Trade List Forever giving away prints. PM at anytime for a free print.
|
JHOVA
Post whore
Registered: 02/17/17
Posts: 4,727
Loc:
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: jbgtaa]
#26102126 - 07/11/19 11:58 AM (4 years, 8 months ago) |
|
|
That's retarded. You contaminate your scalpel with alcohol lol. It's not sterile anymore bud.
Keep it stupid simple water and soap or nothing at all. You don't need fancy mechanics to understand what is going on in a SAB.
Read the tek on the first page which you clearly did not read.
-------------------- 🅃 🄴 🄰 🄼 🄲 🄻 🄸 🄽 🄶 🅆 🅁 🄰 🄿
|
jbgtaa
extraterrestrial
Registered: 06/09/19
Posts: 1,785
Last seen: 3 years, 5 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: JHOVA] 1
#26102189 - 07/11/19 12:25 PM (4 years, 8 months ago) |
|
|
Fancy mechanics? Dog i read the post, lose the fucking attitude. If you want to talk about fancy mechanics we can talk about the air sanitization rates of ozium vs whatever soap your trying to use, which is not meant to be atomized or misted which inherently means its not reaching every inch of air of the box. I read the post, and asked if ozium COULD be used, and you said absolutely no, in the words "soapy water or nothing" and at that point, i had to disagree with you because if soapy water were better at sanitizing air than literally anything else that is sold for that purpose, then that's what people would be using for their homes, for smoke elimination, you know what air sanitizers are actually used for? EDIT: its really not fucking cool to call anyone a retard. I notice it used alot here and for a group of people with a higher mental capacity than most im astonished at that.
-------------------- If the thunder don't get ya, the lightning will. In another time's forgotten space, your eyes looked through your mother's face. Trade List Forever giving away prints. PM at anytime for a free print.
Edited by jbgtaa (07/11/19 12:38 PM)
|
JHOVA
Post whore
Registered: 02/17/17
Posts: 4,727
Loc:
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: jbgtaa]
#26102350 - 07/11/19 01:35 PM (4 years, 8 months ago) |
|
|
Didn't call you names I stated you idea is dumb. Name calling is prohibited. A SAB works by means of still air. Very simple physics. Particles fall down. If no air is moving and all the particles in the air are on the floor of your sub you don't need a sterilized of sanitized surface you don't need clean air.
This is from the op you read.
Quote:
WHY IT WORKS
You CANNOT sterilize the inside of a SAB Sanitizers are not Sterilizers and Sanitary is not sufficiently contamination free to do STERILE work. thus you have to work with physics rather than your chemicals you do not want air movement, it's a STILL AIR BOX this is why glove boxes are a no-no in this hobby glove boxes with attached gloves create air currents, you don't want to stir up non sterile air, you want to avoid having the contamination end up in your work in the first place
This design uses no sleeves or any caps on the arm holes. I believe my work speaks for the efficacy of not needing to over complicate things.
You need to read up on sterile technique. Putting alcohol on a sterilized blade is not sterile work and will lead to lots of contamination. Check out the stickies.
-------------------- 🅃 🄴 🄰 🄼 🄲 🄻 🄸 🄽 🄶 🅆 🅁 🄰 🄿
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: jbgtaa]
#26102463 - 07/11/19 02:53 PM (4 years, 8 months ago) |
|
|
Quote:
jbgtaa said: Fancy mechanics? Dog i read the post, lose the fucking attitude. If you want to talk about fancy mechanics we can talk about the air sanitization rates of ozium vs whatever soap your trying to use, which is not meant to be atomized or misted which inherently means its not reaching every inch of air of the box. I read the post, and asked if ozium COULD be used, and you said absolutely no, in the words "soapy water or nothing" and at that point, i had to disagree with you because if soapy water were better at sanitizing air than literally anything else that is sold for that purpose, then that's what people would be using for their homes, for smoke elimination, you know what air sanitizers are actually used for? EDIT: its really not fucking cool to call anyone a retard. I notice it used alot here and for a group of people with a higher mental capacity than most im astonished at that.
No one called you a retard... But dipping anything you flamed sterilize into alcohol is retarded. Alcohol is sanitizer and alcohol can harbor contaminants that it doesn't kill. Sterile alcohol for use in labs is ridiculously expensive. They push it through a 0.2 micron filter
Ozium is a glycolized spray. I think its PG and PEG if I remember right. Its just a ridiculously expensive version of spraying soapy water which works for thousands and thousands of people.( And so does not spraying your SAB at all)
We don't spray to sanitize the box. We spray to theoretically knock down contaminants. And then have them stick to the walls and floor where they cant become airborne again
|
shroomanly
Stranger
Registered: 06/14/19
Posts: 10
Last seen: 4 years, 4 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#26102815 - 07/11/19 06:04 PM (4 years, 8 months ago) |
|
|
Great tek. Thanks!
|
jbgtaa
extraterrestrial
Registered: 06/09/19
Posts: 1,785
Last seen: 3 years, 5 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: shroomanly]
#26103368 - 07/12/19 12:42 AM (4 years, 8 months ago) |
|
|
Okay so dont cool off the scalpel with alcohol, got it. And ozium is just as effective as soapy water, right? I didnt go out and buy ozium for my SAB, I just had some because i smoke in my house and dont really like the smell. Thats why i use it. And im hip to the principles of the still air box, i just couldnt understand why this guy was specifically telling me to not use ozium when its literally designed to clean the air. I understand that thats not the exact point of the still air box, but to say "soapy water or nothing" just seemed ridiculous to me.
-------------------- If the thunder don't get ya, the lightning will. In another time's forgotten space, your eyes looked through your mother's face. Trade List Forever giving away prints. PM at anytime for a free print.
|
JHOVA
Post whore
Registered: 02/17/17
Posts: 4,727
Loc:
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: jbgtaa]
#26103379 - 07/12/19 01:07 AM (4 years, 8 months ago) |
|
|
thats because you still dont get the physics of a sab
-------------------- 🅃 🄴 🄰 🄼 🄲 🄻 🄸 🄽 🄶 🅆 🅁 🄰 🄿
|
Gwindor
Stranger
Registered: 05/31/19
Posts: 37
Loc: Russia
Last seen: 3 years, 6 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#26150324 - 08/24/19 01:41 AM (4 years, 7 months ago) |
|
|
I've read BOD's SAB tek. And I have a couple of question, please.
1) For example, when I'm going to inoculate grain jars using spore syringe. Should I spray soap water into SAB, when grain jars and spore syringe are already placed inside the SAB? Or should I spray soap water to empty SAB (grain jars and syringe outside the SAB), then wipe grain jars and spore syringe using alcohol and then put them inside the SAB? I mean, if I spray soap water inside the SAB, when grain jars and spore syringe are already placed inside it - jars will be wet and soapy, no? Is it ok?
2) Should I spray soap water inside my SAB through arm holes? Or should I spray soap water from top of SAB, then rotate it upside down and put to table?
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Gwindor]
#26150511 - 08/24/19 07:51 AM (4 years, 7 months ago) |
|
|
Doesn't really matter for either question
|
Alchemycologist
1 in 10,000
Registered: 04/09/19
Posts: 285
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#26150724 - 08/24/19 10:57 AM (4 years, 7 months ago) |
|
|
It can matter if your jars get wet. Most filters will be fine, but I have some stupid papery SFDs that just get wrecked at the slightest bit of moisture.
The SFDs are crap and I shouldn't have bought them but they did come from a sponsor here, so I figured I should say something.
-------------------- Yep.
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
|
Everything inside the PC is going to get wet the entire volume of space in the PC is steam and during cool down that turns back to liquid water. Even under the foil over lids. So you already have to use filters that don't get ruined from moisture
|
Alchemycologist
1 in 10,000
Registered: 04/09/19
Posts: 285
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#26150731 - 08/24/19 11:00 AM (4 years, 7 months ago) |
|
|
Right, but the SFDs I'm talking about will rip and flake off material if you try to wipe them while wet. They're fine if you don't fuck with them but I've had them get wrecked while wiping them with alcohol.
Again, my SFDs are crap and I wouldn't buy them again but someone else might have the same problem.
-------------------- Yep.
|
jbgtaa
extraterrestrial
Registered: 06/09/19
Posts: 1,785
Last seen: 3 years, 5 months
|
|
I’m sorry to add to this off-topic conversation, but I’ve heard that you should try to keep polyfil lids as dry as possible because if they’re wet they can grow contaminated. Is there any truth to this? After the pc cycle I mean, obviously they’re saturated with steam and sterilized in the pc
-------------------- If the thunder don't get ya, the lightning will. In another time's forgotten space, your eyes looked through your mother's face. Trade List Forever giving away prints. PM at anytime for a free print.
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: jbgtaa]
#26151653 - 08/24/19 11:50 PM (4 years, 7 months ago) |
|
|
They'll dry out when you remove them from the cooker
|
tryptkaloids
Learner
Registered: 02/08/15
Posts: 12,650
Loc: Exact Center
Last seen: 42 minutes, 10 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#26151660 - 08/25/19 12:04 AM (4 years, 7 months ago) |
|
|
I've fucked up sfds by leaving them in the cooker for a month. Just don't do that and you'll be good
-------------------- "Remember, kids, the difference between science and screwing around is writing it down" -adam savage Flowchart for Recommended plan of action. Learn the tried and true way to grow mushrooms Use the Damn search engine After you know what you're doing, take a break Pick a book, Make some chips! Josex said:Don't take the site seriously bro, ain't worth it.
|
jbgtaa
extraterrestrial
Registered: 06/09/19
Posts: 1,785
Last seen: 3 years, 5 months
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: tryptkaloids]
#26151735 - 08/25/19 01:50 AM (4 years, 7 months ago) |
|
|
Usually i take my jars out about 3 minutes after the top drops on the pc w a jar handler, tighten the lid, crunch the foil a bit around the band, and return the the cardboard jar box. shake thoroughly right before a2g/g2g. i assumed they steamed off, im just having some problems with like 1/6 jars going green and im trying to convince myself it's anything but my grow area... (wet basement, huge sporeload i'd imagine).
-------------------- If the thunder don't get ya, the lightning will. In another time's forgotten space, your eyes looked through your mother's face. Trade List Forever giving away prints. PM at anytime for a free print.
|
tryptkaloids
Learner
Registered: 02/08/15
Posts: 12,650
Loc: Exact Center
Last seen: 42 minutes, 10 seconds
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: jbgtaa]
#26151750 - 08/25/19 02:11 AM (4 years, 7 months ago) |
|
|
Don't leave the foil on and make your poly linds tighter, that's the problem with poly, its inconsistent. Also check all your other factors like technique, grain prep and anything on your jar rings or threads that could wick contams into
-------------------- "Remember, kids, the difference between science and screwing around is writing it down" -adam savage Flowchart for Recommended plan of action. Learn the tried and true way to grow mushrooms Use the Damn search engine After you know what you're doing, take a break Pick a book, Make some chips! Josex said:Don't take the site seriously bro, ain't worth it.
|
Gwindor
Stranger
Registered: 05/31/19
Posts: 37
Loc: Russia
Last seen: 3 years, 6 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta]
#26151769 - 08/25/19 02:30 AM (4 years, 7 months ago) |
|
|
Thank you! And what about petri dishes. If I want to inoculate agar in petri dishes using inoculation loop. Is it ok, if petri dishes will be wet and soapy? I mean soapy water can be leaked inside petri dishes...
|
Blazer420
ŦøжїϿ ÐȐȜȧƜƐȓ
Registered: 06/13/09
Posts: 4,883
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Gwindor]
#26151794 - 08/25/19 03:09 AM (4 years, 6 months ago) |
|
|
Is it true a dry SAB can be more contam free than a wet soapy SAB?
Trying to get the best out of my SAB, even went out of the way to get a metal screen for the bottom of my SAB to keep objects inside the SAB off of the ground.
Should I just spray the bottom with some soapy water? Or is a dry SAB best? There can be some rather conflicting information on here haha.
-------------------- ~ I used to get high on life, until I realized life was cut with morons ~ * You need 2 wake up and smell the music! * - We are all computer data in a materialistic world - | Sometimes you have to lose yourself, to find anything |
Edited by Blazer420 (08/25/19 03:17 AM)
|
bodhisatta
Smurf real estate agent
Registered: 04/30/13
Posts: 61,891
Loc: Milky way
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: Gwindor]
#26151984 - 08/25/19 07:45 AM (4 years, 6 months ago) |
|
|
Quote:
Gwindor said: Thank you! And what about petri dishes. If I want to inoculate agar in petri dishes using inoculation loop. Is it ok, if petri dishes will be wet and soapy? I mean soapy water can be leaked inside petri dishes...
Put the dishes in after you spray then lol. Besides were talking a quick light mist not a drenching
|
Gwindor
Stranger
Registered: 05/31/19
Posts: 37
Loc: Russia
Last seen: 3 years, 6 days
|
Re: BOD's SIMPLE AS FUCK SAB TEK [Re: bodhisatta] 1
#26161878 - 08/31/19 05:17 AM (4 years, 6 months ago) |
|
|
As I understand the point of SAB is that inside surfaces of SAB become wet and soapy, and contaminants from air stick to all wet and soapy surfaces.
If I preload all working stuff in SAB before spraying soapy water inside, that means all working stuff will have soapy surfaces sticking contaminants.
For example, if I put jars and spore syringe inside the SAB and then spray inside. My syringe and jars surfaces will become soapy and will get contaminants from the air sticked to them. And will I need to touch jars and syringe carefully and wipe my hands with alcohol after touching them each time, because their surfaces are "dirty" and full of contaminants?
I mean, I'm trying to imagine process, and it seems to me, that jars and syringe will become kind of "dirty" if I spray soap water when they're inside the SAB.
Do I understand the mechanics correctly?
|
|