Home | Community | Message Board


This site includes paid links. Please support our sponsors.


Welcome to the Shroomery Message Board! You are experiencing a small sample of what the site has to offer. Please login or register to post messages and view our exclusive members-only content. You'll gain access to additional forums, file attachments, board customizations, encrypted private messages, and much more!

Shop: Original Sensible Seeds Autoflowering Cannabis Seeds   Left Coast Kratom Kratom Powder For Sale   Bridgetown Botanicals Bridgetown Botanicals   PhytoExtractum Buy Bali Kratom Powder   North Spore Cultivation Supplies   Mushroom-Hut Mono Tub Substrate

Jump to first unread post Pages: 1 | 2  [ show all ]
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
OfflinePeteyboy
SpaceWalker
Male User Gallery


Registered: 06/21/16
Posts: 2,848
Loc: Trumperica! Flag
Last seen: 4 years, 5 months
first successful extraction!! * 2
    #23865885 - 11/25/16 12:13 PM (7 years, 2 months ago)

Hey everybody! I just finished scraping my trays and this is what I got.

CYBs Hybrid ATB 'Salt' Tek on 50 grams ACRB...


Is this what I'm lookin for?


--------------------


*TRADE LIST* https://www.shroomery.org/forums/showflat.php/Number/23855008 *TRADE LIST*




Extras: Filter Print Post Top
InvisibleLsDreamin
Stranger
 User Gallery


Registered: 10/23/10
Posts: 492
Re: first successful extraction!! [Re: Peteyboy]
    #23866015 - 11/25/16 01:14 PM (7 years, 2 months ago)

Looks good. Let set on a piece of unused printing paper to dry out futher or whatever you feel like.


--------------------


Extras: Filter Print Post Top
Offlinekrypto2000
Unknown


Registered: 12/05/06
Posts: 11,579
Last seen: 4 years, 3 months
Re: first successful extraction!! [Re: LsDreamin]
    #23866028 - 11/25/16 01:18 PM (7 years, 2 months ago)

That should definitely do the job. Did you recrystalize it or just evaporate the np? It's looking pretty oily and yellow. A recrystalization should give you white fluffy crystals if you want to go an extra step. That should do just fine if you don't however.


Extras: Filter Print Post Top
OfflinePeteyboy
SpaceWalker
Male User Gallery


Registered: 06/21/16
Posts: 2,848
Loc: Trumperica! Flag
Last seen: 4 years, 5 months
Re: first successful extraction!! [Re: krypto2000]
    #23866200 - 11/25/16 02:32 PM (7 years, 2 months ago)

Alright thanks guys! Yeah I have it out drying further I thought it was a bit gooey, I'm assuming that the gooeyness is still solvent yet to evaporate?

Also is this called Jim jam? Or is that something different?

I considered cleaning it up with a re-x but I'm very eager to experience this...


--------------------


*TRADE LIST* https://www.shroomery.org/forums/showflat.php/Number/23855008 *TRADE LIST*




Extras: Filter Print Post Top
Offlinewicca mixer
Marmalade, I like marmalade :)
Male User Gallery


Registered: 07/30/10
Posts: 158
Last seen: 6 years, 10 days
Re: first successful extraction!! [Re: Peteyboy]
    #23866209 - 11/25/16 02:39 PM (7 years, 2 months ago)

Just out of interest, what exactly is it that you've extracted? I'm thinking either DMT or perhaps mescaline..


Extras: Filter Print Post Top
OfflinePeteyboy
SpaceWalker
Male User Gallery


Registered: 06/21/16
Posts: 2,848
Loc: Trumperica! Flag
Last seen: 4 years, 5 months
Re: first successful extraction!! [Re: wicca mixer]
    #23866219 - 11/25/16 02:43 PM (7 years, 2 months ago)

The deemsters...:jah:


--------------------


*TRADE LIST* https://www.shroomery.org/forums/showflat.php/Number/23855008 *TRADE LIST*




Extras: Filter Print Post Top
Offlinewicca mixer
Marmalade, I like marmalade :)
Male User Gallery


Registered: 07/30/10
Posts: 158
Last seen: 6 years, 10 days
Re: first successful extraction!! [Re: Peteyboy]
    #23866229 - 11/25/16 02:46 PM (7 years, 2 months ago)

Ah cool. I hope to some day do an extraction from my psychotrias and possibly my ice plants.


Extras: Filter Print Post Top
Offlinekrypto2000
Unknown


Registered: 12/05/06
Posts: 11,579
Last seen: 4 years, 3 months
Re: first successful extraction!! [Re: wicca mixer]
    #23866594 - 11/25/16 04:36 PM (7 years, 2 months ago)

Without a recrystalization you're probably going to have a mix of oip and crystals I woupd think by the looks of that picture.


Extras: Filter Print Post Top
OfflinePeteyboy
SpaceWalker
Male User Gallery


Registered: 06/21/16
Posts: 2,848
Loc: Trumperica! Flag
Last seen: 4 years, 5 months
Re: first successful extraction!! [Re: krypto2000]
    #23866610 - 11/25/16 04:41 PM (7 years, 2 months ago)

Oil? Is the oil safe? Does it have solvent left in it...the goop smells like new sneakers or rubbery...


--------------------


*TRADE LIST* https://www.shroomery.org/forums/showflat.php/Number/23855008 *TRADE LIST*




Extras: Filter Print Post Top
Offlinekrypto2000
Unknown


Registered: 12/05/06
Posts: 11,579
Last seen: 4 years, 3 months
Re: first successful extraction!! [Re: Peteyboy]
    #23867447 - 11/25/16 10:03 PM (7 years, 2 months ago)

It's hard to say. The oil is safe, it's just nmt and dmt, maybe some oxidation products as well depending. It's hard to tell if there is solvent left in it though. The smoke will be very harsh if so, it's not going to be very bad to just smoke a few times if you do by mistake, but you definitely don't want to smoke that if you know there's still solvent in it.


Extras: Filter Print Post Top
OfflinePeteyboy
SpaceWalker
Male User Gallery


Registered: 06/21/16
Posts: 2,848
Loc: Trumperica! Flag
Last seen: 4 years, 5 months
Re: first successful extraction!! [Re: krypto2000]
    #23867469 - 11/25/16 10:13 PM (7 years, 2 months ago)

I don't think there is but I'm gonna let it sit out and see if anything else evaporates...then it's up in smoke! Haha


--------------------


*TRADE LIST* https://www.shroomery.org/forums/showflat.php/Number/23855008 *TRADE LIST*




Extras: Filter Print Post Top
OfflinePeteyboy
SpaceWalker
Male User Gallery


Registered: 06/21/16
Posts: 2,848
Loc: Trumperica! Flag
Last seen: 4 years, 5 months
Re: first successful extraction!! [Re: Peteyboy] * 2
    #23867633 - 11/25/16 11:34 PM (7 years, 2 months ago)

Just had an incredible first DMT experience, absolutely amazing, I came out with tears in my eyes!!


--------------------


*TRADE LIST* https://www.shroomery.org/forums/showflat.php/Number/23855008 *TRADE LIST*




Extras: Filter Print Post Top
OfflineP.Zappatecorum
Lophophilus
Male


Registered: 10/15/12
Posts: 2,094
Loc: Cactaceae
Last seen: 3 years, 5 months
Re: first successful extraction!! [Re: Peteyboy]
    #23867661 - 11/25/16 11:49 PM (7 years, 2 months ago)

I've had good experiences with the oily yellow shit I got from later pulls. I've had fluffy white crystals that didn't seem as balanced or enjoyable. Jungle spice is just fine. Why waste some goodies for aesthetics? Same with mescaline, I'd rather have full spectrum tar than pure mescaline powder. :shrug:


Extras: Filter Print Post Top
OfflineAkashicExplorer
Dimensional Jumper
 User Gallery


Registered: 09/12/13
Posts: 912
Last seen: 4 days, 22 hours
Re: first successful extraction!! [Re: P.Zappatecorum]
    #23867802 - 11/26/16 02:16 AM (7 years, 2 months ago)

Let us now if you need help working through that. We won't mind pitching in for you and help you finish all of that...

:awecid:


--------------------
:mushroom2: The 87 gram MushZilla BEAST  :mushroom2:

:thumbup:And it just obliterated the uttermost crap out from me.:thumbup:

Love, Bliss, Laughter and Enlightenment!


Extras: Filter Print Post Top
Offlinekrypto2000
Unknown


Registered: 12/05/06
Posts: 11,579
Last seen: 4 years, 3 months
Re: first successful extraction!! [Re: AkashicExplorer]
    #23868204 - 11/26/16 08:42 AM (7 years, 2 months ago)

I mostly prefer crystals just because they're easier to handle, store, and weigh. The experience is not particularly better than the oil, but I haven't smoked the oil much either to really say.


Extras: Filter Print Post Top
InvisibleRaven44
Entry not permitted to muggles
Male


Registered: 12/07/13
Posts: 1,970
Loc: My sovereign reality bubble
Re: first successful extraction!! [Re: krypto2000]
    #23868235 - 11/26/16 08:49 AM (7 years, 2 months ago)

I disagree

The crystals when done right will blow people's minds in ways they've never had happen.

U will be known for the best.

A naphtha re x, won't cut it tho. Purity won't be high enough

Heptane Re x u should get some nice formations. That's the ticket. Trust me.
Ur looking for say 2mm x 4mm transparent x tals. Not a white powder looking crap but some lil baby shards of quarts.

That oil looks completely unacceptable to me personally I'd never give that to someone. Ever.

But that's just me

People won't want yellow stiff once they try this im.trying to explain. Yellow will then be unacceptable

I find people's input negate most often, so it's better to come.to your own conclusions is what I'm saying

q21sq21s tek seems good


Edited by Raven44 (11/26/16 08:55 AM)


Extras: Filter Print Post Top
OfflinePeteyboy
SpaceWalker
Male User Gallery


Registered: 06/21/16
Posts: 2,848
Loc: Trumperica! Flag
Last seen: 4 years, 5 months
Re: first successful extraction!! [Re: Raven44]
    #23868388 - 11/26/16 09:47 AM (7 years, 2 months ago)

Thanks for all the input guys! It ended up being 1.5 grams out of 50 grams ACRB on 3 pulls. But I suspected it could dry out more so I have been freezing and thawing it periodically and this morning it appears that the crystals are seperating from the oil and the oil is decreasing in the amount that is visible.

P. Zap,
  I agree in my mind I want the full spectrum of any alkaloid. I feel all the other goodies definitely enhance the experience. Mescaline will be next project. Do yu have a recommended tek??

Akashaic,
  If you were local bro, We'd be blasting off together right now!!

Raven,
  I wasnt expecting perfection the first time around. I used the most user friendly tek i could find. But I definitely absolutley loved the whole process, And will be doing this again soon. And I will most definitely be checking out the TEK you provided!

So is Jungle spice the same as Jim Jam? And is Jungle Spice what i have here? Forgive me if it's a dumb question, this is literally my first experience with all of this.


--------------------


*TRADE LIST* https://www.shroomery.org/forums/showflat.php/Number/23855008 *TRADE LIST*




Extras: Filter Print Post Top
Offlinekrypto2000
Unknown


Registered: 12/05/06
Posts: 11,579
Last seen: 4 years, 3 months
Re: first successful extraction!! [Re: Raven44] * 1
    #23868390 - 11/26/16 09:48 AM (7 years, 2 months ago)

If I were selling it I'd agree, but people not wanting it because it's oily or has a color? That seems very snobbish. I'm not saying you're snobbish, I just can't understand why someone wouldn't want it. It's not like it was a synthesis and it's harmful junk left behind, most of it is dmt even, it just hasn't crystallized.

With that said I have always made mine with heptane so that would explain why I never got anything but nice fluffy white crystals. I knew it was better than naptha, but I didn't know naptha gave an oil or w/e.


Extras: Filter Print Post Top
OfflinePeteyboy
SpaceWalker
Male User Gallery


Registered: 06/21/16
Posts: 2,848
Loc: Trumperica! Flag
Last seen: 4 years, 5 months
Re: first successful extraction!! [Re: krypto2000]
    #23868398 - 11/26/16 09:51 AM (7 years, 2 months ago)

is Heptane as easily accessible as Naptha?


--------------------


*TRADE LIST* https://www.shroomery.org/forums/showflat.php/Number/23855008 *TRADE LIST*




Extras: Filter Print Post Top
Offlinekrypto2000
Unknown


Registered: 12/05/06
Posts: 11,579
Last seen: 4 years, 3 months
Re: first successful extraction!! [Re: Peteyboy]
    #23868485 - 11/26/16 10:24 AM (7 years, 2 months ago)

Get a product called bestine rubber cement remover, it's pure heptane. I ordered mine online, but you can probably get it at a craft store maybe? Haven't looked so I can't say for sure.


Extras: Filter Print Post Top
OfflinePeteyboy
SpaceWalker
Male User Gallery


Registered: 06/21/16
Posts: 2,848
Loc: Trumperica! Flag
Last seen: 4 years, 5 months
Re: first successful extraction!! [Re: krypto2000]
    #23868489 - 11/26/16 10:26 AM (7 years, 2 months ago)

krypto, do you use a specific tek?


--------------------


*TRADE LIST* https://www.shroomery.org/forums/showflat.php/Number/23855008 *TRADE LIST*




Extras: Filter Print Post Top
Offlinekrypto2000
Unknown


Registered: 12/05/06
Posts: 11,579
Last seen: 4 years, 3 months
Re: first successful extraction!! [Re: Peteyboy]
    #23868563 - 11/26/16 10:54 AM (7 years, 2 months ago)

No I don't think I did, but they're all more or less the same. Iirc I think I did a methanol extraction first to get a purple goop. I then dissolved the goop in some basic water (I think it was maybe ~300ml of water and 1g of KOH), extracted it with DCM which was evaporated down to yield an amber oil. I then dissolved the oil in heptane, not all of it would dissolve (what was left should have been the nmt), decanted it off to leave the nmt behind and then stuck it in the freezer to crystalize. It would be better to skip the dcm all together and just extract with heptane instead if you don't wish to extract and separate the nmt.

The main reason I started from an MeOH extraction was bc I used a soxhlet to save time rather than wait for the dH2O+lye to leach the alkaloids out, plus you don't need nearly as much lye if you only use it to basify the alkaloids opposed to using an excess to break down the cellular walls. My yields probably could have been better, I think I got around 1%, but I likely did not do the initial extraction as long as I could have. I also wonder if some of these people claiming 2-2.5% yields are half and half nmt/dmt as well though, wikipedia reports acrb as only having 1.15% nndmt anyway in which case I got a pretty good yield.

I do have a bunch of labware as well. If I did not I would suggest throwing your ground up acrb in a strong solution of lye, letting it sit for awhile, and then mixing with your NP/naptha/heptane, doing 2-5 NP pulls, and then go straight to recrystalizing it from there. Depending how much NP you use you may want to evaporate it down some before sticking it in the freezer, I'd aim for 100-200ml/g of alkaloids. You can always crystalize it, reduce the remaining naptha by 1/2 or so, and then recrystalize it again to obtain more goods. The only other thing you could primarily do to improve on that would be an acidic extraction/soak before basifying it but I'm not sure that helps a whole lot anyway.


Extras: Filter Print Post Top
OfflinePeteyboy
SpaceWalker
Male User Gallery


Registered: 06/21/16
Posts: 2,848
Loc: Trumperica! Flag
Last seen: 4 years, 5 months
Re: first successful extraction!! [Re: krypto2000]
    #23868744 - 11/26/16 11:45 AM (7 years, 2 months ago)

Yeah i just started looking into real deal lab glass since i had alot of fun doing this extraction. But I honestly have zero experience with chemistry s i am teaching myself as i go. And have no clue how to use these advanced chemistry set ups hahaha.

I used CYBs Hybrid ATB Salt TEK:
  It starts with a heated acid soak, then you add a heated highly saturated salt solution, followed by a very strong solution of lye. mix it all up and place bottle in double boiler for heat. soak for a couple hours then add Naptha for the extraction.
  I did notice some white chunky stuff still floating after freeze precipitating over night. I wasnt sure what to do about that stuff cause i thought it was alkaloids but i didnt want to wait any longer lol.
  I suspect my left over solution has DMT left in it but I'm planning on using it again for a few more pulls.

After freeze and thawing several times it now looks like this...


Looks like if i keep the cycle up it will purge itself completely and be just the yellow crystals?


--------------------


*TRADE LIST* https://www.shroomery.org/forums/showflat.php/Number/23855008 *TRADE LIST*




Extras: Filter Print Post Top
InvisibleRaven44
Entry not permitted to muggles
Male


Registered: 12/07/13
Posts: 1,970
Loc: My sovereign reality bubble
Re: first successful extraction!! [Re: krypto2000]
    #23868765 - 11/26/16 11:56 AM (7 years, 2 months ago)

Quote:

krypto2000 said:
If I were selling it I'd agree, but people not wanting it because it's oily or has a color? That seems very snobbish. I'm not saying you're snobbish, I just can't understand why someone wouldn't want it. It's not like it was a synthesis and it's harmful junk left behind, most of it is dmt even, it just hasn't crystallized.

With that said I have always made mine with heptane so that would explain why I never got anything but nice fluffy white crystals. I knew it was better than naptha, but I didn't know naptha gave an oil or w/e.





Its as simple as the experience they had were so much more profound that they wouldn't desire colored stuff any longer.

Kinda like smoking dirt weed and fire. If u have never had fire u wouldn't mind dirt weed maybe. Once u get that fire tho it's all u will truly want

If doing re x w heptane it's only better if done properly and u leave behind all or nearly all the impurities

When u increase purity the change is profound. People who experience with this, know this.


Extras: Filter Print Post Top
OfflinePeteyboy
SpaceWalker
Male User Gallery


Registered: 06/21/16
Posts: 2,848
Loc: Trumperica! Flag
Last seen: 4 years, 5 months
Re: first successful extraction!! [Re: Raven44]
    #23868945 - 11/26/16 12:55 PM (7 years, 2 months ago)

Raven- I am reading through q21q21's tek. Extremely informative and answered alot of my questions as well. I am really leaning towards the Jim Jam, the full spectrum effect sounds very appealing to me!


--------------------


*TRADE LIST* https://www.shroomery.org/forums/showflat.php/Number/23855008 *TRADE LIST*




Extras: Filter Print Post Top
InvisibleRaven44
Entry not permitted to muggles
Male


Registered: 12/07/13
Posts: 1,970
Loc: My sovereign reality bubble
Re: first successful extraction!! [Re: Peteyboy]
    #23868975 - 11/26/16 01:04 PM (7 years, 2 months ago)

I personally ignore the Jim jam. I consider that info of no use.

I lean towards the fun fest


Extras: Filter Print Post Top
OfflinePeteyboy
SpaceWalker
Male User Gallery


Registered: 06/21/16
Posts: 2,848
Loc: Trumperica! Flag
Last seen: 4 years, 5 months
Re: first successful extraction!! [Re: Raven44]
    #23868993 - 11/26/16 01:08 PM (7 years, 2 months ago)

Really? Do you mind if i ask why?

Do ou think its dirty or unsafe? Or do you just not like the experience?


--------------------


*TRADE LIST* https://www.shroomery.org/forums/showflat.php/Number/23855008 *TRADE LIST*




Extras: Filter Print Post Top
Offlinekrypto2000
Unknown


Registered: 12/05/06
Posts: 11,579
Last seen: 4 years, 3 months
Re: first successful extraction!! [Re: Peteyboy]
    #23869014 - 11/26/16 01:15 PM (7 years, 2 months ago)

Quote:

Peteyboy said:
Yeah i just started looking into real deal lab glass since i had alot of fun doing this extraction. But I honestly have zero experience with chemistry s i am teaching myself as i go. And have no clue how to use these advanced chemistry set ups hahaha.

I used CYBs Hybrid ATB Salt TEK:
  It starts with a heated acid soak, then you add a heated highly saturated salt solution, followed by a very strong solution of lye. mix it all up and place bottle in double boiler for heat. soak for a couple hours then add Naptha for the extraction.
  I did notice some white chunky stuff still floating after freeze precipitating over night. I wasnt sure what to do about that stuff cause i thought it was alkaloids but i didnt want to wait any longer lol.
  I suspect my left over solution has DMT left in it but I'm planning on using it again for a few more pulls.

After freeze and thawing several times it now looks like this...


Looks like if i keep the cycle up it will purge itself completely and be just the yellow crystals?




That's what got me into it. Well, I always had a general interest and I like learning for learning's sake anyway. A year or so ago I just had basic chemistry knowledge and no glassware, now I have a lot more knowledge (still more to go) and a more or less complete lab. It's not too hard, I've made a lot of mistakes and wasted a lot, but it's just part of the learning experience.


Extras: Filter Print Post Top
OfflineTyperwritermonky
shboop a doop a doop

Registered: 01/19/12
Posts: 5,375
Loc: Mrs. Brown's Teahouse
Last seen: 3 days, 8 hours
Re: first successful extraction!! [Re: Peteyboy]
    #23869047 - 11/26/16 01:25 PM (7 years, 2 months ago)

No that oil is the oils from the plant you pulled because of heat, emulsion layers, or other factors.  They are not toxic if you were VERY careful getting no lye in those crystals, but if I were you, I'd do one more rinse.  You're going to lose quite a bit of weight, but end up with those snowy white crystals.

What I reccomend is try smoking some of the fluffy white crystals alone, and if it seems impure, do a rinse.  You will probably end up with .5g of pure crystals though.

A warm naptha/heptane boil and decant will do the trick.


Extras: Filter Print Post Top
OfflinePeteyboy
SpaceWalker
Male User Gallery


Registered: 06/21/16
Posts: 2,848
Loc: Trumperica! Flag
Last seen: 4 years, 5 months
Re: first successful extraction!! [Re: krypto2000]
    #23869063 - 11/26/16 01:30 PM (7 years, 2 months ago)

I love to learn as well and i love trying new things especially when it is challenging intellectualy.

I plan on doing a few more extractions to get more comfortable with the process, and as i build experience I'll be working on collecting glass and proper rigs and shit.

What do you think it will run me for the proper equipment to pull this off professional style?


--------------------


*TRADE LIST* https://www.shroomery.org/forums/showflat.php/Number/23855008 *TRADE LIST*




Extras: Filter Print Post Top
OfflinePeteyboy
SpaceWalker
Male User Gallery


Registered: 06/21/16
Posts: 2,848
Loc: Trumperica! Flag
Last seen: 4 years, 5 months
Re: first successful extraction!! [Re: Typerwritermonky]
    #23869073 - 11/26/16 01:33 PM (7 years, 2 months ago)

Quote:

Typerwritermonky said:
No that oil is the oils from the plant you pulled because of heat, emulsion layers, or other factors.  They are not toxic if you were VERY careful getting no lye in those crystals, but if I were you, I'd do one more rinse.  You're going to lose quite a bit of weight, but end up with those snowy white crystals.

What I reccomend is try smoking some of the fluffy white crystals alone, and if it seems impure, do a rinse.  You will probably end up with .5g of pure crystals though.

A warm naptha/heptane boil and decant will do the trick.




I was extremely careful not to pull out any lye. I even left a little layer of naptha in the bottle so that I wouldnt risk it.

But yesterday i mixed it all up together and put it in the freezer. Maybe that wasnt a good idea? Although the oil has pretty much completely disappeared and its turning into a chunky paste like substance now.


--------------------


*TRADE LIST* https://www.shroomery.org/forums/showflat.php/Number/23855008 *TRADE LIST*




Edited by Peteyboy (11/26/16 01:36 PM)


Extras: Filter Print Post Top
Invisibleopenmind
curious
 User Gallery

Registered: 08/03/07
Posts: 13,866
Re: first successful extraction!! [Re: Raven44]
    #23869109 - 11/26/16 01:49 PM (7 years, 2 months ago)

Quote:

Raven44 said:



Its as simple as the experience they had were so much more profound that they wouldn't desire colored stuff any longer....







Lots of folks actually prefer yellow/orange, or somewhat waxy/oily material, over white crystals.




Over the years I've worked with large translucent crystals, fluffy small white crystals, and waxy orange/yellow crystalline material...and I haven't had any particular experience with the translucent crystals or the fluffy white material that stood out as being so different, or so much more profound than the other stuff that it made me only want to use the translucent/white stuff..






-OM


.


--------------------


Extras: Filter Print Post Top
InvisibleRaven44
Entry not permitted to muggles
Male


Registered: 12/07/13
Posts: 1,970
Loc: My sovereign reality bubble
Re: first successful extraction!! [Re: openmind]
    #23869122 - 11/26/16 01:56 PM (7 years, 2 months ago)

Quote:

openmind said:
Quote:

Raven44 said:



Its as simple as the experience they had were so much more profound that they wouldn't desire colored stuff any longer....







Lots of folks actually prefer yellow/orange, or somewhat waxy/oily material, over white crystals.




Over the years I've worked with large translucent crystals, fluffy small white crystals, and waxy orange/yellow crystalline material...and I haven't had any particular experience with the translucent crystals or the fluffy white material that stood out as being so different, or so much more profound than the other stuff that it made me only want to use the translucent/white stuff..






-OM


.




Everyone I know would say otherwise


Extras: Filter Print Post Top
Offlinekrypto2000
Unknown


Registered: 12/05/06
Posts: 11,579
Last seen: 4 years, 3 months
Re: first successful extraction!! [Re: Peteyboy]
    #23869195 - 11/26/16 02:27 PM (7 years, 2 months ago)

Quote:

Peteyboy said:
I love to learn as well and i love trying new things especially when it is challenging intellectualy.

I plan on doing a few more extractions to get more comfortable with the process, and as i build experience I'll be working on collecting glass and proper rigs and shit.

What do you think it will run me for the proper equipment to pull this off professional style?




I'd start with a separatory funnel, 500-1000ml should be a good size. After that a distillation apparatus and either a hotplate or heating mantle so that you can recycle your solvents. From there it kind of depends what you want to do, but various sized flasks and beakers are good to have, a vacuum pump, measuring cylinders, filtration flask/funnel/paper, and pipettes should be a good basic start. All of that would probably be 300-500$ roughly guessing, possibly cheaper. You'll find you need a lot of things depending what you're doing which are kind of specific to your workflow and everything. I'm sure there's some necessary things I'm forgetting, stir bars, a ph meter, funnels, and of course some general solvents and reagents are good to have as well.


Extras: Filter Print Post Top
OfflinePeteyboy
SpaceWalker
Male User Gallery


Registered: 06/21/16
Posts: 2,848
Loc: Trumperica! Flag
Last seen: 4 years, 5 months
Re: first successful extraction!! [Re: krypto2000]
    #23869207 - 11/26/16 02:32 PM (7 years, 2 months ago)

Alright so I guess we'll chalk this debate up to personal preference! I have yet to experience the white stuff so I don't know but I will make it a mission to run a side by side...:jah:

Krypto...Dude thanks for that list atleast i have somewhere to start now! I will probably just be extracting DMT, Mesc, and LSA...but I saw a thread on extracting psilocybin and turning it to powder that I thought was quite interesting.

WOW! This stuff is now totally dry and waxy and has maintained its weight at 1.5 grams on three pulls from 50grams of ACRB!!!

from what ive read thats pretty damn good!!



--------------------


*TRADE LIST* https://www.shroomery.org/forums/showflat.php/Number/23855008 *TRADE LIST*




Edited by Peteyboy (11/26/16 02:45 PM)


Extras: Filter Print Post Top
Offlinekrypto2000
Unknown


Registered: 12/05/06
Posts: 11,579
Last seen: 4 years, 3 months
Re: first successful extraction!! [Re: Peteyboy]
    #23869338 - 11/26/16 03:15 PM (7 years, 2 months ago)

1.5g sounds like a good yield. If the wikipedia is accurate/consistent it says 1.15%dmt and 1.43% nmt so it sounds like you got a pretty thorough extraction by that.

One other thing I forgot to add to that list which is important is a water/coolant chiller. That can be expensive to buy but you can use an old mini fridge or something. I have an old mini fridge that gets down to -10-0c depending on ambient temperatures and then the little freezer compartment gets down to -25C iirc, maybe it was -18C. Anyway I got a small rubbermade that wipl fit in there and put a gallon of -25f windshield washer fluid in it and a small submersible water pump. Theres a feed and return line and on the return I have it going through a pc water cooling radiator that fits up in the freezer area. W/o the radiator it still works but it does not hold a low temp but so long under load and I gain maybe another -5c of cooling power. Altogether it probably cost me about 60-75$ in parts and can get down to -10c compared to a commercial unit which would be 2-300$ and not even get down as low since they only use water as a coolant.


Extras: Filter Print Post Top
Jump to top Pages: 1 | 2  [ show all ]

Shop: Original Sensible Seeds Autoflowering Cannabis Seeds   Left Coast Kratom Kratom Powder For Sale   Bridgetown Botanicals Bridgetown Botanicals   PhytoExtractum Buy Bali Kratom Powder   North Spore Cultivation Supplies   Mushroom-Hut Mono Tub Substrate


Similar ThreadsPosterViewsRepliesLast post
* Psilocybin Extraction Project
( 1 2 3 4 all )
ryan 47,598 68 09/01/11 07:51 PM
by Shroomanism
* Psilocin extraction questions DNKYD 3,444 9 02/17/05 09:57 PM
by DNKYD
* ever done an ethyl alcohol extraction? TRS 2,610 4 02/20/04 04:48 PM
by Effed
* salvinorin a extraction Sucellos 1,188 2 05/02/05 11:12 AM
by Sucellos
* DMT Extractions EvilGir 4,324 4 02/13/03 05:09 PM
by psychopsilocyber
* Heptane STB Tek 1gram from 100gMHRB in 24hrs (With Pics!)
( 1 2 3 all )
dopestone 13,980 45 06/01/16 04:28 AM
by zurdol
* alkoloid extraction hoodoo 2,574 5 01/30/02 08:30 PM
by gnrm23
* marsofold tek - heptane, naphtha or DCM ( dichloromethane )? ionicle 5,471 3 11/03/17 05:26 PM
by Northerner

Extra information
You cannot start new topics / You cannot reply to topics
HTML is disabled / BBCode is enabled
Moderator: psilocybinjunkie, Rose, mushboy, LogicaL Chaos, Northerner, bodhisatta
978 topic views. 5 members, 76 guests and 31 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ]
Search this thread:

Copyright 1997-2024 Mind Media. Some rights reserved.

Generated in 0.04 seconds spending 0.009 seconds on 14 queries.