|
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
PinPornProducer
Buy the ticket, take the ride



Registered: 08/23/14
Posts: 9,981
Loc: Rocky Point R.I
Last seen: 6 years, 24 days
|
Re: Fruiting stage polyfill need to be adjusted? [Re: Cojack69]
#23855393 - 11/21/16 07:33 PM (7 years, 2 months ago) |
|
|
As long as you have beads of moisture on the surface you'll be fine. I'm running around 45% in my room now but that will drop to around 30 mid winter.

|
Cojack69
Stranger

Registered: 10/16/16
Posts: 275
Last seen: 2 days, 20 hours
|
Re: Fruiting stage polyfill need to be adjusted? [Re: PinPornProducer]
#23856338 - 11/22/16 06:15 AM (7 years, 2 months ago) |
|
|
Okay, so I tested out the humidity and temperature inside of my tub last night over night and checked it this morning. The humidity inside of my tub was 88%. The temperature inside my tub was 73 degrees. The outside temperature of my monotub inside of the room is 73 degrees as well. The same exact temperature inside of the mono tub. Any suggestions on what should I do
Edited by Cojack69 (11/22/16 06:16 AM)
|
Cojack69
Stranger

Registered: 10/16/16
Posts: 275
Last seen: 2 days, 20 hours
|
Re: Fruiting stage polyfill need to be adjusted? [Re: Cojack69]
#23856340 - 11/22/16 06:17 AM (7 years, 2 months ago) |
|
|
I used a digital indoor/outdoor humidity and temperature reader.
|
PinPornProducer
Buy the ticket, take the ride



Registered: 08/23/14
Posts: 9,981
Loc: Rocky Point R.I
Last seen: 6 years, 24 days
|
Re: Fruiting stage polyfill need to be adjusted? [Re: Cojack69]
#23856466 - 11/22/16 08:08 AM (7 years, 2 months ago) |
|
|
Perfect
|
freespeech
disciple



Registered: 12/12/08
Posts: 1,745
Loc: PNW
|
Re: Fruiting stage polyfill need to be adjusted? [Re: PinPornProducer]
#23856724 - 11/22/16 09:59 AM (7 years, 2 months ago) |
|
|
You're doing fine. Try to keep things dialed in as prescribed in this thread, and mist as needed to help out when it's not dialed in perfectly. Your tub looks pretty good so don't sweat it too much. It's easy to over-think and dote on your tubs while you're waiting for something to happen, and there's nothing really wrong with that, but your tub actually looks decent IMO and should flush nicely. It takes experience to develop the instinct where you can look at your tub and automatically know how to make whatever minor adjustments are necessary, and you're on the path to having that instinct. Just keep at it.
|
Cojack69
Stranger

Registered: 10/16/16
Posts: 275
Last seen: 2 days, 20 hours
|
Re: Fruiting stage polyfill need to be adjusted? [Re: freespeech]
#23857577 - 11/22/16 02:44 PM (7 years, 2 months ago) |
|
|
Thanks for the confidence. It's my first time I want it to go right and learn better ways. I'll post more when I have some pins.
|
Cojack69
Stranger

Registered: 10/16/16
Posts: 275
Last seen: 2 days, 20 hours
|
Re: Fruiting stage polyfill need to be adjusted? [Re: Cojack69]
#23862889 - 11/24/16 08:10 AM (7 years, 2 months ago) |
|
|
|
Cojack69
Stranger

Registered: 10/16/16
Posts: 275
Last seen: 2 days, 20 hours
|
Re: Fruiting stage polyfill need to be adjusted? [Re: Cojack69]
#23862897 - 11/24/16 08:14 AM (7 years, 2 months ago) |
|
|
okay, I put two more tubs into fruiting this morning. My other tubs have been going for 6 days. Still no pins. Not worried yet, because it hasn't been a week or more yet. I'm just trying to show you my setup with the lighting and everything, as well as the placement of my fan. I took two different pictures of different placements of the fan because I don't know which one would be best. I would rather have the one in the corner obviously because it is winter time and I don't want the fan blowing on a lot of stuff in the room. But if it needs to be in the middle of the room better like it is and the other picture, I am fine with that. I know the wind of the fan does Bounce Off the Wall a little bit but I don't know if that's a big deal. Let me know any advice or which way would be best. It would be greatly appreciated
|
Cojack69
Stranger

Registered: 10/16/16
Posts: 275
Last seen: 2 days, 20 hours
|
Re: Fruiting stage polyfill need to be adjusted? [Re: Cojack69]
#23865597 - 11/25/16 10:05 AM (7 years, 2 months ago) |
|
|
|
Cojack69
Stranger

Registered: 10/16/16
Posts: 275
Last seen: 2 days, 20 hours
|
Re: Fruiting stage polyfill need to be adjusted? [Re: Cojack69]
#23865599 - 11/25/16 10:05 AM (7 years, 2 months ago) |
|
|
First pins when I woke up this morning. What y'all think? Anything I should do now to help?
|
|
|
You cannot start new topics / You cannot reply to topics HTML is disabled / BBCode is enabled
Moderator: Shroomism, george castanza, RogerRabbit, veggie, mushboy, fahtster, LogicaL Chaos, 13shrooms, Stipe-n Cap, Pastywhyte, bodhisatta, Tormato, Land Trout, A.k.a 852 topic views. 11 members, 131 guests and 65 web crawlers are browsing this forum.
[ Show Images Only | Sort by Score | Print Topic ] |
|