|
musiclover420
psychonaut



Registered: 11/06/12
Posts: 19,563
Loc: PNW
Last seen: 2 years, 5 months
|
DIY fog machine/ cannabis vape fountain 2
#23678590 - 09/26/16 01:46 AM (7 years, 4 months ago) |
|
|
So I watched a DIY fog machine video recently, and realized you can do it just by evaporating vape juice essentially. You use purified water and glycerine.
Anyways, I just tried it using cannabis veggie glycerine tincture and it honestly got me pretty baked! I didn't even do it efficiently either 
Literally just shook up a small jar of lotus vape juice and ganja tincture/ water then put it in a hot pan which produced a lot of steam/ vapour which I inhaled.
I am being totally serious, everyone should try this out!
Here is the video that inspired me:
I am going to try and make a more efficient fog machine vape rig, I literally just used a paper cone to inhale the vapor from a pot 
I am surprised how baked it got me too, been dabbing all day but it brought on a quick change in my high and I am much more relaxed now... Wow, had to share this.
-------------------- Don't worry about me, I've got all that I need. And I'm singing my song to the sky You know how it feels, With the breeze of the sun in your eyes. Not minding that time's passing by I've got all and more, My smile, just as before. Is all that I carry with me I talk to myself, I need nobody else. I'm lost and I'm mine, yes I'm free
Edited by musiclover420 (09/26/16 01:47 AM)
|
yourboybob
professional faggot

Registered: 08/28/16
Posts: 271
Last seen: 7 years, 3 months
|
Re: DIY fog machine/ cannabis vape fountain [Re: musiclover420] 1
#23678596 - 09/26/16 01:50 AM (7 years, 4 months ago) |
|
|
you could light up a cig and blow jt in peoples faces and it would kinda have the same effect as a fog machine
|
musiclover420
psychonaut



Registered: 11/06/12
Posts: 19,563
Loc: PNW
Last seen: 2 years, 5 months
|
Re: DIY fog machine/ cannabis vape fountain [Re: yourboybob]
#23678610 - 09/26/16 02:01 AM (7 years, 4 months ago) |
|
|
Quote:
yourboybob said: you could light up a cig and blow jt in peoples faces and it would kinda have the same effect as a fog machine
How so? That is actually smoke where as fog machines essentially produce water vaper...
-------------------- Don't worry about me, I've got all that I need. And I'm singing my song to the sky You know how it feels, With the breeze of the sun in your eyes. Not minding that time's passing by I've got all and more, My smile, just as before. Is all that I carry with me I talk to myself, I need nobody else. I'm lost and I'm mine, yes I'm free
|
moonrockmushy
High on Spite



Registered: 07/01/05
Posts: 19,067
|
Re: DIY fog machine/ cannabis vape fountain [Re: musiclover420]
#23678617 - 09/26/16 02:08 AM (7 years, 4 months ago) |
|
|
ehh, kids can't tell the difference. Who would have thought you could pull off such a cool effect with a single cigarette
|
yourboybob
professional faggot

Registered: 08/28/16
Posts: 271
Last seen: 7 years, 3 months
|
Re: DIY fog machine/ cannabis vape fountain [Re: moonrockmushy] 1
#23678624 - 09/26/16 02:14 AM (7 years, 4 months ago) |
|
|
Quote:
moonrockmushy said:
ehh, kids can't tell the difference. Who would have thought you could pull off such a cool effect with a single cigarette 
the trick is to get a nice long drag. take a deeeeep breath like you are about to dive to the bottom of a pool bc your lil brother fell in the deep in and you only have like 30 seconds to save him
u do that and then take a long drag and slowly let it out. you can't puff it all out too quickly, then it'll lose its cool effect. nice and slow. smells kinda different but ehh smoke, fog, it all looks the same.
|
musiclover420
psychonaut



Registered: 11/06/12
Posts: 19,563
Loc: PNW
Last seen: 2 years, 5 months
|
Re: DIY fog machine/ cannabis vape fountain [Re: moonrockmushy]
#23678631 - 09/26/16 02:24 AM (7 years, 4 months ago) |
|
|
My house is now semi hotboxed and I keep getting more baked just sitting here, but especially whenever I walk into my kitched to add some more water
-------------------- Don't worry about me, I've got all that I need. And I'm singing my song to the sky You know how it feels, With the breeze of the sun in your eyes. Not minding that time's passing by I've got all and more, My smile, just as before. Is all that I carry with me I talk to myself, I need nobody else. I'm lost and I'm mine, yes I'm free
|
yourboybob
professional faggot

Registered: 08/28/16
Posts: 271
Last seen: 7 years, 3 months
|
Re: DIY fog machine/ cannabis vape fountain [Re: musiclover420] 1
#23678636 - 09/26/16 02:30 AM (7 years, 4 months ago) |
|
|
i find that newport menthols work ybe best for fog machine purposes. on halloween i have this sick looking skeleton that I position on my front porch, with his hand against the wall like he's just kinda leaning back chillin like a g
anywayyy, I sit there and chain smoke and make a really cool fog machine effect and the kids love it, real spooky personal touch they tell me
|
LogicaL Chaos
Ascension Energy & Alien UFOs




Registered: 05/12/07
Posts: 69,363
Loc: The Inexpressible...
Last seen: 1 hour, 15 minutes
|
Re: DIY fog machine/ cannabis vape fountain [Re: musiclover420]
#23678650 - 09/26/16 02:56 AM (7 years, 4 months ago) |
|
|
Quote:
musiclover420 said: My house is now semi hotboxed and I keep getting more baked just sitting here, but especially whenever I walk into my kitched to add some more water 
Perfect for Raves with lazers! cool idea.
-------------------- "What you must understand is that your physical dimension affects everyone in the higher dimensions as well. All things are interconnected. All things are One. Therefore, if one dimension is broken or out of balance, then all other dimensions will experience repercussions." - Pleiadian Prophecy 2020 The New Golden Age by James Carwin PROJECT BLUE BOOK ANALYSIS! (312 pages!) | Psychedelics & UFOs | Ready to Contact UFOs? | The Source on Mushrooms | Trippy Gematrix | Dj TeknoLogical | Fentanyl Test Kits R.I.P. Big Worm || The Start of the Ascension Process was 2020. Welcome to the Next Great Era of Earth 🌎🌍🌏
  Oregon Eclipse Festival 2017 :: Aug 19th - 21st :: Pure Paradise   Very Effective LSA Extraction Tek | 💧 Advanced Cold Water LSA Extraction Method 💧 |  Mescajuana - Mescaline with Marijuana | DMT Dab Bongs | UFO Technology! Shpongle
     
|
musiclover420
psychonaut



Registered: 11/06/12
Posts: 19,563
Loc: PNW
Last seen: 2 years, 5 months
|
Re: DIY fog machine/ cannabis vape fountain [Re: LogicaL Chaos]
#23678667 - 09/26/16 03:27 AM (7 years, 4 months ago) |
|
|
I am glad it worked out pretty well becouse I thought it was a really cool idea when I first thought of it.
-------------------- Don't worry about me, I've got all that I need. And I'm singing my song to the sky You know how it feels, With the breeze of the sun in your eyes. Not minding that time's passing by I've got all and more, My smile, just as before. Is all that I carry with me I talk to myself, I need nobody else. I'm lost and I'm mine, yes I'm free
|
falsereality


Registered: 04/01/13
Posts: 4,112
|
Re: DIY fog machine/ cannabis vape fountain [Re: musiclover420] 1
#23678720 - 09/26/16 04:27 AM (7 years, 4 months ago) |
|
|
Some plastics (specifically those that contain acrylonitrile) when heated form hydrogen cyanide, inhaling it would be deadly. If you're going to try this pay incredibly close attention to the materials you are using.
On a brighter note, this looks like a phenomenal way to hotbox a room without wasting weed .
|
musiclover420
psychonaut



Registered: 11/06/12
Posts: 19,563
Loc: PNW
Last seen: 2 years, 5 months
|
Re: DIY fog machine/ cannabis vape fountain [Re: falsereality]
#23678750 - 09/26/16 04:47 AM (7 years, 4 months ago) |
|
|
I didn't use any plastics. I don't even store my weed in plastic generally 
It was hard to get a steady temperature though which resulted in some semi burnt "smoke" as well as lots of smoother vapor.
-------------------- Don't worry about me, I've got all that I need. And I'm singing my song to the sky You know how it feels, With the breeze of the sun in your eyes. Not minding that time's passing by I've got all and more, My smile, just as before. Is all that I carry with me I talk to myself, I need nobody else. I'm lost and I'm mine, yes I'm free
|
falsereality


Registered: 04/01/13
Posts: 4,112
|
Re: DIY fog machine/ cannabis vape fountain [Re: musiclover420]
#23678772 - 09/26/16 05:03 AM (7 years, 4 months ago) |
|
|
Quote:
musiclover420 said: I didn't use any plastics. I don't even store my weed in plastic generally 
It was hard to get a steady temperature though which resulted in some semi burnt "smoke" as well as lots of smoother vapor.
Just a friendly note .
If I need a constant temperature I use an oil bath heated by a hot plate.
https://en.wikipedia.org/wiki/Oil_bath
|
musiclover420
psychonaut



Registered: 11/06/12
Posts: 19,563
Loc: PNW
Last seen: 2 years, 5 months
|
Re: DIY fog machine/ cannabis vape fountain [Re: falsereality]
#23678776 - 09/26/16 05:07 AM (7 years, 4 months ago) |
|
|
A hot plate was my first thought but I don't have any and just used a gas stove I intend to try and rig something cool up though.
-------------------- Don't worry about me, I've got all that I need. And I'm singing my song to the sky You know how it feels, With the breeze of the sun in your eyes. Not minding that time's passing by I've got all and more, My smile, just as before. Is all that I carry with me I talk to myself, I need nobody else. I'm lost and I'm mine, yes I'm free
|
moonrockmushy
High on Spite



Registered: 07/01/05
Posts: 19,067
|
Re: DIY fog machine/ cannabis vape fountain [Re: falsereality]
#23679952 - 09/26/16 02:00 PM (7 years, 4 months ago) |
|
|
Quote:
falsereality said: Some plastics (specifically those that contain acrylonitrile) when heated form hydrogen cyanide, inhaling it would be deadly. If you're going to try this pay incredibly close attention to the materials you are using.
On a brighter note, this looks like a phenomenal way to hotbox a room without wasting weed .
I inhale a ton of plastic, like I am probably in the upper 1% of plastic breathers as a big part of my job is burning plastic off and out of things.
I thought cyanide was something you could develop a resistance to though, right? I'm still alive 
Quote:
yourboybob said:
Quote:
moonrockmushy said:
ehh, kids can't tell the difference. Who would have thought you could pull off such a cool effect with a single cigarette 
the trick is to get a nice long drag. take a deeeeep breath like you are about to dive to the bottom of a pool bc your lil brother fell in the deep in and you only have like 30 seconds to save him ...
great description btw
Edited by moonrockmushy (09/26/16 02:01 PM)
|
Seriously_trippin
Cosmic Guru Ganesh



Registered: 07/12/13
Posts: 14,473
Last seen: 4 hours, 33 minutes
|
Re: DIY fog machine/ cannabis vape fountain [Re: moonrockmushy]
#23680123 - 09/26/16 02:56 PM (7 years, 4 months ago) |
|
|
Those party city bastards! I am furious that I grew up not able to afford fog machines when this shit was going on!!
-------------------- R.I.P Zombi3, Blue Helix Modest Mouse Zappa Slothie That Kid With The face ShLong Le Canard split_by_nine & Big Worm Forever Etched in the sands of time in the shroomery and ever so beloved and deeply missed by many
|
musiclover420
psychonaut



Registered: 11/06/12
Posts: 19,563
Loc: PNW
Last seen: 2 years, 5 months
|
|
Quote:
Seriously_trippin said: Those party city bastards! I am furious that I grew up not able to afford fog machines when this shit was going on!!
I was thinking about buying one until I realized how simple it is to make essentially the same thing 
Even the cheap ones are like 50-100$ for a little liquid heating area and a timer and I have read many cheaper ones don't even work good at all
-------------------- Don't worry about me, I've got all that I need. And I'm singing my song to the sky You know how it feels, With the breeze of the sun in your eyes. Not minding that time's passing by I've got all and more, My smile, just as before. Is all that I carry with me I talk to myself, I need nobody else. I'm lost and I'm mine, yes I'm free
|
yourboybob
professional faggot

Registered: 08/28/16
Posts: 271
Last seen: 7 years, 3 months
|
Re: DIY fog machine/ cannabis vape fountain [Re: moonrockmushy]
#23680357 - 09/26/16 04:14 PM (7 years, 4 months ago) |
|
|
Quote:
moonrockmushy said:
Quote:
falsereality said: Some plastics (specifically those that contain acrylonitrile) when heated form hydrogen cyanide, inhaling it would be deadly. If you're going to try this pay incredibly close attention to the materials you are using.
On a brighter note, this looks like a phenomenal way to hotbox a room without wasting weed .
I inhale a ton of plastic, like I am probably in the upper 1% of plastic breathers as a big part of my job is burning plastic off and out of things.
I thought cyanide was something you could develop a resistance to though, right? I'm still alive 
Quote:
yourboybob said:
Quote:
moonrockmushy said:
ehh, kids can't tell the difference. Who would have thought you could pull off such a cool effect with a single cigarette 
the trick is to get a nice long drag. take a deeeeep breath like you are about to dive to the bottom of a pool bc your lil brother fell in the deep in and you only have like 30 seconds to save him ...
great description btw
thanks. i kinda have a way with words
|
|