|
gizmo1



Registered: 06/15/11
Posts: 3,831
Loc: FREEDOM
|
Re: Cultivation General Discussion [Re: bound2grow] 1
#26670471 - 05/14/20 11:43 AM (3 years, 8 months ago) |
|
|
Quote:
bound2grow said: Hello everyone, sorry I have not uploaded a new design for the 3D printed filter holder for jar lids yet. My home state is finally opening up, so I am getting the hell out of Got Covid City. Sirachi, a member here, and I have been working on it via email. He has printed about a dozen tests for me, but now that I will be near my printer, it will be a lot faster for me. I am wrapping up my work here and will be home in a day or two, at which point I will finish it up.
Thank you to all who contributed input into the design. Without your help, I would have made a lid only suited for SLA printing. With FDM printing it would take 2x as long and use 2x as much material because of extensive supports needed.
I also took the time to actually draft this instead of welding a bunch of primitives. The result is no hidden faces or ngons so a much faster rip to your slicer and no unexpected voids. Sirachi has been printing it at .1mm on his modified Ender3 in TPU and it is very rigid, able to withstand repeated PC runs without deformity, and strong. It's just a much better design now than the original one I uploaded.
Here is a peek at it. As it turns out Sirachi lives within an hour of me and we are going to meet up and get this dialled in, in the next week or so. At this point it is very close. I have to fix a problem with the retaining prongs not having enough material under them to hold, and when that is done, I will upload the STL and .blend files for everyone to use, or modify at will.
If people want the finished product but do not have a printer I will make these to trade with members. I am sure others here would be willing to do the same. I will help you get these once they are ready to print, so don't fret or pay a bunch for a service to print them for you.

Its looking good.
-------------------- Trade List πππ 6 hole Mini Monos
|
Inthepit
Aum Mani Padme Hum



Registered: 08/20/19
Posts: 1,742
Loc: Puerto Rico
Last seen: 14 days, 3 minutes
|
Re: Cultivation General Discussion [Re: gizmo1] 1
#26670512 - 05/14/20 12:10 PM (3 years, 8 months ago) |
|
|
Ok,here's a good laugh for all you experienced mush heads! My Coir has cooled to 90 F, can I mix it with the spawn now, huh, huh? Pant pant LOL
|
filthyknees
no coincidence


Registered: 03/08/13
Posts: 6,283
|
Re: Cultivation General Discussion [Re: Inthepit]
#26670517 - 05/14/20 12:12 PM (3 years, 8 months ago) |
|
|
Yes. By the time you're done mixing the spawn it'll be just fine.
I'll dump it into the tub and spread it if I need it to cool faster than normal relative to staying in the large totes I prep it in.
-------------------- But if you're in a hurry, and really got to go If you're in a hurry, might have to find out slow That it's one thing to try and another to fly You get there quicker just a step at a time It's one thing to bark, another to bite The show ain't over till you pack up at night
|
Inthepit
Aum Mani Padme Hum



Registered: 08/20/19
Posts: 1,742
Loc: Puerto Rico
Last seen: 14 days, 3 minutes
|
Re: Cultivation General Discussion [Re: filthyknees]
#26670533 - 05/14/20 12:24 PM (3 years, 8 months ago) |
|
|
Wow!Filthyknees thankyou and thanks for my first prints and first successful fruiting!
|
filthyknees
no coincidence


Registered: 03/08/13
Posts: 6,283
|
Re: Cultivation General Discussion [Re: Inthepit]
#26670613 - 05/14/20 01:02 PM (3 years, 8 months ago) |
|
|
You're very welcome, glad to see you around. Hope you get back to surfing soon. 
I got a 24x24 99.99% HEPA filter on the way, gonna dust off the ol hood.
-------------------- But if you're in a hurry, and really got to go If you're in a hurry, might have to find out slow That it's one thing to try and another to fly You get there quicker just a step at a time It's one thing to bark, another to bite The show ain't over till you pack up at night
|
gizmo1



Registered: 06/15/11
Posts: 3,831
Loc: FREEDOM
|
Re: Cultivation General Discussion [Re: filthyknees] 1
#26670620 - 05/14/20 01:04 PM (3 years, 8 months ago) |
|
|
So I did this hoping to get some interestimg cubensis crosses. I know a cube is a cube but this should be fun regardless. https://www.shroomery.org/forums/showflat.php/Number/26656343
If anyone is interested and has access to the marketplace I put this here https://www.shroomery.org/forums/showflat.php/Number/26670603
Questions, comments or concerns?
-------------------- Trade List πππ 6 hole Mini Monos
Edited by gizmo1 (05/14/20 01:06 PM)
|
Drboomer
The lord magnificent



Registered: 09/22/19
Posts: 957
|
Re: Cultivation General Discussion [Re: gizmo1]
#26670820 - 05/14/20 03:04 PM (3 years, 8 months ago) |
|
|
Hey filthy was it you sending the lpeu prints around Christmas? That shit was wild wayyy more visual than I had planned for!
|
filthyknees
no coincidence


Registered: 03/08/13
Posts: 6,283
|
Re: Cultivation General Discussion [Re: Drboomer]
#26670850 - 05/14/20 03:17 PM (3 years, 8 months ago) |
|
|
Nah, there was like five of us in a thread of natedawgs all giving away different stuff, I think it's still on the marketplace forum, it may have been capsmcgee or yessum, I might recall they grew lpeu but not sure. My contribution was Texas orange cap prints. I'm sure those guys wouldn't mind hearing / seeing the results, that's always kewl.
-------------------- But if you're in a hurry, and really got to go If you're in a hurry, might have to find out slow That it's one thing to try and another to fly You get there quicker just a step at a time It's one thing to bark, another to bite The show ain't over till you pack up at night
|
Inthepit
Aum Mani Padme Hum



Registered: 08/20/19
Posts: 1,742
Loc: Puerto Rico
Last seen: 14 days, 3 minutes
|
Re: Cultivation General Discussion [Re: filthyknees]
#26670872 - 05/14/20 03:26 PM (3 years, 8 months ago) |
|
|
Ya but there was a bunch in LAGM growing PESA from you from the Tribe Xmas give away. It was like what heck is everyone growing PESA from Filthyknees! LOL
|
filthyknees
no coincidence


Registered: 03/08/13
Posts: 6,283
|
Re: Cultivation General Discussion [Re: Inthepit] 1
#26670897 - 05/14/20 03:35 PM (3 years, 8 months ago) |
|
|
Between three strains going right now pesa is faster by days to pin. Got to love that.
This pic is day 9 and I may have the first harvest on day, 15 tomorrow.
-------------------- But if you're in a hurry, and really got to go If you're in a hurry, might have to find out slow That it's one thing to try and another to fly You get there quicker just a step at a time It's one thing to bark, another to bite The show ain't over till you pack up at night
|
Drboomer
The lord magnificent



Registered: 09/22/19
Posts: 957
|
Re: Cultivation General Discussion [Re: filthyknees]
#26670898 - 05/14/20 03:36 PM (3 years, 8 months ago) |
|
|
Ah I think I got a toc and a pesa.
My cat straight put his asshole on my pesa print though. Walked away for a minute to take a leak he hopped in the box sat on my half open print and was trying open a pasty plate with his teeth. There was an imprint of his asshole on the edge of the print.
|
Psyche delics
Hypochondriac


Registered: 09/24/15
Posts: 3,644
Last seen: 4 months, 18 days
|
Re: Cultivation General Discussion [Re: Drboomer]
#26670909 - 05/14/20 03:39 PM (3 years, 8 months ago) |
|
|
My Texan pe6's culture is so slow it's ridiculous I might not even finish it and start over when my other agar work grows out a bit.
--------------------
|
Inthepit
Aum Mani Padme Hum



Registered: 08/20/19
Posts: 1,742
Loc: Puerto Rico
Last seen: 14 days, 3 minutes
|
Re: Cultivation General Discussion [Re: Drboomer]
#26670910 - 05/14/20 03:40 PM (3 years, 8 months ago) |
|
|
OMG!That's hilarious! WE WANT PICTURES LOL
|
Culliganman360
Stranger



Registered: 06/05/19
Posts: 854
|
Re: Cultivation General Discussion [Re: filthyknees]
#26670913 - 05/14/20 03:42 PM (3 years, 8 months ago) |
|
|
Quote:
filthyknees said: Between three strains going right now pesa is faster by days to pin. Got to love that.
This pic is day 9 and I may have the first harvest on day, 15 tomorrow.

Dam ... makes me jelly bro β³
|
Drboomer
The lord magnificent



Registered: 09/22/19
Posts: 957
|
Re: Cultivation General Discussion [Re: Inthepit]
#26670925 - 05/14/20 03:52 PM (3 years, 8 months ago) |
|
|
I wish I had taken pictures. In that moment though I was mad and didn't think to. For those wondering I checked an his litterbox did not flush
|
A.k.a
Stranger



Registered: 10/27/19
Posts: 16,782
Loc: Gaming the system
Last seen: 2 hours, 25 minutes
|
|
Filthy is that a clone? And did you use a lot of spawn??
Man 9 days I thought toc was fast.
I might have to go back to spore with pesa and try again. I did three grows one was normal and two took longer than PE. One got its first pin at like 33 days. I havenβt tried it yet but if slow growing means potent those should be evil.
lol dr boomer I was gonna say go make sure the litter box is colonizing healthily.
That can be your signature when you send prints. Just look for the cat asshole stamp of authenticity.
--------------------
LAGM2020     
Edited by A.k.a (05/14/20 03:55 PM)
|
A.k.a
Stranger



Registered: 10/27/19
Posts: 16,782
Loc: Gaming the system
Last seen: 2 hours, 25 minutes
|
Re: Cultivation General Discussion [Re: A.k.a] 1
#26670974 - 05/14/20 04:18 PM (3 years, 8 months ago) |
|
|
I spawned pearl oysters to an old cube sub a few days ago and just opened the bag to check it out.
Maybe Iβm crazy but the stuff smells like caramel to me.
--------------------
LAGM2020     
|
filthyknees
no coincidence


Registered: 03/08/13
Posts: 6,283
|
Re: Cultivation General Discussion [Re: A.k.a]
#26671008 - 05/14/20 04:32 PM (3 years, 8 months ago) |
|
|
It's for sure a clone, all tubs pinning exactly the same, 4qts spawn per tub
-------------------- But if you're in a hurry, and really got to go If you're in a hurry, might have to find out slow That it's one thing to try and another to fly You get there quicker just a step at a time It's one thing to bark, another to bite The show ain't over till you pack up at night
|
sh4d0ws
LSx


Registered: 02/26/08
Posts: 12,086
|
Re: Cultivation General Discussion [Re: filthyknees] 1
#26671164 - 05/14/20 06:03 PM (3 years, 8 months ago) |
|
|
I'm trying to run my AA for the first time but it didn't come with a trivet. Is that normal? The manual seems to list a trivet. Anyways... I just wanna run a load full of bags...
Can I put the bags directly on the rack on the bottom?
What do you guys do?
Thanks!
|
ouuwee
Garden of Weeden


Registered: 03/22/20
Posts: 297
Last seen: 21 days, 6 hours
|
|
Quote:
Psyche delics said:
Quote:
ouuwee said: It never dipped below 15 thankfully. I was just distracted and wasn't watching the meter like a hawk. I checked every 5-10 mins. And it's weird how a little increase/decrease in heat caused drastic psi changes which threw me off. I learned I had to turn the knob very slightly so I'll do better in future runs. Hopefully this cycle was a success and my agar turned out fine

Do those have holes on the side or nah?
Yes holes on the side
|
|