|
Some of these posts are very old and might contain outdated information. You may wish to search for newer posts instead.
|
Dennis
Stranger

Registered: 04/14/12
Posts: 6
Last seen: 7 years, 4 months
|
Question regarding smoking DMT out of a crack pipe.
#23517378 - 08/06/16 11:09 PM (7 years, 5 months ago) |
|
|
I've smoked DMT 3 times, twice out of a crack pipe. Still have yet to break through.
I'm always hearing how people break through on 3 hits or so. I must have taken like 10 pulls my last session.
I loaded 60mg in my last session, and i don't see how its possible to vaporize the 60mg's in 3 tokes, i always have oil left over.
Could anyone give some input, or some advice on this?
Thanks guys
|
K1ngSp4de
CHUT UP!!!




Registered: 01/16/12
Posts: 1,680
Loc:
|
Re: Question regarding smoking DMT out of a crack pipe. [Re: Dennis]
#23517431 - 08/06/16 11:32 PM (7 years, 5 months ago) |
|
|
Sounds like it is weak, or you're not burning it rather than vaping IMO.
-------------------- PC Repair and Troubleshooting Forum If a law is unjust, a man is not only right to disobey it, he is obligated to do so. - Thomas Jefferson Si peccasse negamus fallimur et nulla est in nobis veritas.
|
xThunder
Stranger


Registered: 07/03/12
Posts: 83
Last seen: 3 years, 7 months
|
Re: Question regarding smoking DMT out of a crack pipe. [Re: K1ngSp4de]
#23517445 - 08/06/16 11:42 PM (7 years, 5 months ago) |
|
|
Holding in the hit is more important than the amount of hits you take. I used a crack pipe for DMT my first few times and I can certainly say it really isn't a very good method. I prefer dabbing it personally, would use the machine if I did DMT often enough to acquire one.
Take a nice big hit of it and hold it in for 30 seconds...a lot of times you won't make it to 30 seconds before you blast off in my experience. If you still can, just do the same thing until you get where you want to be. Holding it in sucks because it literally tastes like burnt plastic but that's just how it goes.
|
alexmir

Registered: 02/26/15
Posts: 388
Last seen: 1 year, 2 months
|
Re: Question regarding smoking DMT out of a crack pipe. [Re: xThunder]
#23517572 - 08/07/16 01:04 AM (7 years, 5 months ago) |
|
|
Dabbing it is a guaranteed breakthrough,assuming you add enough powder)
|
Hardrock3742
Peace, love, and good vibes


Registered: 08/01/16
Posts: 95
Last seen: 6 years, 1 month
|
Re: Question regarding smoking DMT out of a crack pipe. [Re: alexmir]
#23518361 - 08/07/16 10:28 AM (7 years, 5 months ago) |
|
|
still playing with the idea of trying DMT for the first time. Im sure it wont take long for me to give in haha.
|
Eywa_devotee
Goddess Worshiper


Registered: 10/04/10
Posts: 1,088
Loc: State of Confusion, Arkan...
Last seen: 3 years, 7 months
|
Re: Question regarding smoking DMT out of a crack pipe. [Re: Hardrock3742]
#23519444 - 08/07/16 04:36 PM (7 years, 5 months ago) |
|
|
Preheat the pipe so it starts smoking. Exhale as much as you can. While torching the pipe, inhale slowly but deliberately like taking a huge rip off a bong. Hold for 20 to 30 seconds. Repeat once or twice if you can. IME i found that usually one or two hits is all that is needed. Also, adding some clove powder to the DMT helps you keep the hit in longer. The cloves stabilize the molten DMT in place so it doesn't move all over the pipe and makes the smoke much smoother to take in huge hits. Just add about 1:4 Cloves to DMT. Hope this helps.
-------------------- "Love one another." "To Love is to know me." "Love is the Law, Love under Will." "In Compassion, all sorrows end." Regardless of the Master, the message is the same- Choose love and you shall live, Choose Fear and you shall die. Help bring peace to this Earth: Love one another, and serve others before yourself.
|
Big Worm
Perf


Registered: 04/20/09
Posts: 7,642
Last seen: 3 years, 9 months
|
Re: Question regarding smoking DMT out of a crack pipe. [Re: Eywa_devotee]
#23519452 - 08/07/16 04:39 PM (7 years, 5 months ago) |
|
|
If your product is quality, it's all about smoking technique.
I melt my spice into the brillo, then start to heat up the end and when it gets hot and starts to smoke a little bit, I exhale, and then put the lighter to the neck and start inhaling slowly.
It should pull smoke fairly quickly. First time I did this, I loaded 100mg and couldn't take more than one hit and I was gone.
|
Dennis
Stranger

Registered: 04/14/12
Posts: 6
Last seen: 7 years, 4 months
|
Re: Question regarding smoking DMT out of a crack pipe. [Re: Big Worm]
#23519518 - 08/07/16 05:03 PM (7 years, 5 months ago) |
|
|
Good stuff, thanks guys.
Yeah i'll probably just end up making the machine though.
But does anyone recommend using a vaporizer? I have one that claims to be good for oils. It's a handheld box mod not a desktop vape.
|
bigbitch
Stranger

Registered: 04/17/14
Posts: 975
Last seen: 5 years, 27 days
|
Re: Question regarding smoking DMT out of a crack pipe. [Re: Dennis]
#23519598 - 08/07/16 05:31 PM (7 years, 5 months ago) |
|
|
Quote:
Dennis said: Good stuff, thanks guys.
Yeah i'll probably just end up making the machine though.
But does anyone recommend using a vaporizer? I have one that claims to be good for oils. It's a handheld box mod not a desktop vape.
You could try it, but I think the desktop ones would be better. You have like a vape for nicotine vape liquid? I don't think that would work Some people get these little ceramic discs they sandwhich it between on desktop vapes. An E-nail is expensive, but would be nice. A cheap dab rig setup would work. I hate hitting dmt high temp on a dab rig, it's harsh. Your crackpipe method was really harsh for me too. You've got to get it real hot and just keep ripping it. I coughed my lungs out so bad though, it kinda killed my vibe.
|
Nature Boy
Stranger than most



Registered: 07/09/07
Posts: 8,241
Loc: Samsara
Last seen: 2 months, 6 days
|
Re: Question regarding smoking DMT out of a crack pipe. [Re: Eywa_devotee]
#23519634 - 08/07/16 05:42 PM (7 years, 5 months ago) |
|
|
Quote:
Eywa_devotee said: Preheat the pipe so it starts smoking. Exhale as much as you can. While torching the pipe, inhale slowly but deliberately like taking a huge rip off a bong. Hold for 20 to 30 seconds. Repeat once or twice if you can. IME i found that usually one or two hits is all that is needed. Also, adding some clove powder to the DMT helps you keep the hit in longer. The cloves stabilize the molten DMT in place so it doesn't move all over the pipe and makes the smoke much smoother to take in huge hits. Just add about 1:4 Cloves to DMT. Hope this helps.
-------------------- All submitted posts under this user name are works of pure fiction or outright lies. Any information, statement, or assertion contained therein should be considered pure unadulterated bullshit. Note well: Sorry, but I do not answer PM's unless you are a long-time trusted friend. If you have a question, ask it in the appropriate thread.
|
AuroraBorealis88
Stranger


Registered: 05/06/16
Posts: 5,871
Last seen: 5 years, 2 months
|
Re: Question regarding smoking DMT out of a crack pipe. [Re: xThunder]
#23519700 - 08/07/16 06:02 PM (7 years, 5 months ago) |
|
|
Quote:
xThunder said: Holding in the hit is more important than the amount of hits you take. I used a crack pipe for DMT my first few times and I can certainly say it really isn't a very good method. I prefer dabbing it personally, would use the machine if I did DMT often enough to acquire one.
When you dab DMT is it literally just as easy as dabbing any kind of THC wax? Do you tend to do it low temp?
|
ak47myth
Stranger


Registered: 08/04/11
Posts: 1,306
Last seen: 3 years, 4 months
|
Re: Question regarding smoking DMT out of a crack pipe. [Re: AuroraBorealis88]
#23521110 - 08/08/16 04:20 AM (7 years, 5 months ago) |
|
|
Man i like the idea of smoking JUST dmt without sandwiching. But i hate using meth pipes for obvious reasons.. also dont want a meth pipe sittting in my home.
|
Nature Boy
Stranger than most



Registered: 07/09/07
Posts: 8,241
Loc: Samsara
Last seen: 2 months, 6 days
|
Re: Question regarding smoking DMT out of a crack pipe. [Re: ak47myth]
#23521118 - 08/08/16 04:32 AM (7 years, 5 months ago) |
|
|
Quote:
ak47myth said: Man i like the idea of smoking JUST dmt without sandwiching. But i hate using meth pipes for obvious reasons.. also dont want a meth pipe sittting in my home.
Can't say as I blame you. THat was the motivating force behind me making changa out of all my DMT.
N.B.
-------------------- All submitted posts under this user name are works of pure fiction or outright lies. Any information, statement, or assertion contained therein should be considered pure unadulterated bullshit. Note well: Sorry, but I do not answer PM's unless you are a long-time trusted friend. If you have a question, ask it in the appropriate thread.
|
qweqaz
Break-through


Registered: 01/10/14
Posts: 447
Loc: Sweden
Last seen: 4 years, 10 months
|
Re: Question regarding smoking DMT out of a crack pipe. [Re: Nature Boy]
#23521643 - 08/08/16 10:35 AM (7 years, 5 months ago) |
|
|
This is how I do it:
Place chosen amount in the pipe and then use a Bic lighter and gently melt the DMT in the pipe without making it smoke, just lightly heat it up so all of the crystals are liquid. This helps making sure you do not start inhaling crystals from being nervous and inhaling too fast.
Then sit and relax for a bit and make yourself aware of what your intent is with your trip, then start heat it up until it starts coming out smoke. Now both the glass and the DMT is warm enough for you to start inhaling. The more oxygen that comes in from that little hole on top will make the DMT start vaporize much more easily the more you inhale.
Inhale 2/3 of your lungcapacity and then inhale the rest 1/3 with only oxygen. Inhale slowly without too much force, take your time. This will make sure that you get all of your DMT deep into your lungs and also makes it easier for yourself to have enough oxygen in you to hold it in. Also makes it a lot easier in general as it can become a bit intense on the lungs. Hold the smoke in for 15sec and then slowly breathe out in a relaxed way.
Now here comes the very interresting part. Look at the pipe in such a way that you can see the background is off focus but clearly observable for you while you watch the pipe. Then take another inhalation and repeat, continue to loop at the pipe. This is when reality behind the pipe starts to shift slightly as if a second layer of reality tries to mimic the positions of the objects in the room to create a replica. Take another hit and you will see this aztec-like glass-wall to form infront of you and the pipe and seethrough beings will be standing around you. The glass-wall of sorts will move closer to you and your pipe the more you inhale. When the wall moves passed your face you will enter the other reality and you can navigate in there.
If you take your time it is ofcourse a lot easier to adjust but things become psychicly weird as you never punch through completly. If you focus on taking one giant inhalation that is always the best but then you need a torchlighter to heat the DMT up superfast to get everything in. Tho that will mess with your lungs, its better to use Bic-lighter as its easier to navigate the heat and it never gets too warm.
|
mushpunx
Fungus Punk


Registered: 04/20/14
Posts: 13,394
Last seen: 11 days, 20 hours
|
Re: Question regarding smoking DMT out of a crack pipe. [Re: qweqaz]
#23524192 - 08/09/16 07:49 AM (7 years, 5 months ago) |
|
|
Are you talking about a meth pipe (oil burner) or a proper crack pipe, which is a glass stem (rose tube) with chore boy in the end?
The "machine" i. actually just a crack pipe made out of a bottle. In the UK its very popular to put chore boy in the end of a mini liquor bottle and tap a hole in the weak spot at the bottom. Its just a cheap crack pipe without a stem.
The "machine" works very well actually, vaporizing the DMT by convection. Indtead of going out and buying a glass drill bit, Id suggest just going to the corner store and buy a glass stem
--------------------
 Amateur Mycologists United AMU Q&A
|
JesusDaMartian
★ Intergalactic Shaman ★


Registered: 04/27/14
Posts: 406
Loc: USA East Coast
Last seen: 5 months, 29 days
|
Re: Question regarding smoking DMT out of a crack pipe. [Re: mushpunx]
#23524624 - 08/09/16 11:16 AM (7 years, 5 months ago) |
|
|
HANDS DOWN the best way to smoke it in my experience has been:
step 1 : Get a bong ( Do not fill with water)
step 2: Pack bowl with a little weed, then dmt then a little weed on top like a sandwich.
step 3 : Light top weed and cherry it - while continuing to hold the flame above the weed.
step 4: Pull Gently To fill the bong with smoke
step 5 : take a deep breath of air to read your lungs
step 6 : clear the bond and hold it as long as you can tolerate
step 7: Close your eyes and enjoy.
I have used this method several times and it has never failed for me.
Have an AWESOME day and A great Trip
-------------------- "If you smile at me, I will understand 'Cause that is something everybody everywhere does In the same language" -Wooden Ships
|
Jeff Vader
Ineffable


Registered: 08/08/14
Posts: 427
Loc: South Africa
Last seen: 1 year, 6 months
|
Re: Question regarding smoking DMT out of a crack pipe. [Re: JesusDaMartian]
#23524703 - 08/09/16 11:48 AM (7 years, 5 months ago) |
|
|
DMT is simple, hold it in as long as you can. Easier said than done, can burn most times.
--------------------
“With four hundred milligrams of moksha-medicine in their bloodstreams, even beginners can catch a glimpse of the world as it looks to someone who has been liberated from his bondage to the ego.”
|
|